ABtUS AV545-W2 User Manual

SPECIFICATION

Model Name A

LCD/LED SIZE Suitable for 23” to 46”
GROSS DIMENSION 460 x 160 x 33 (mm)
GROSS WEIGHT 1.9 kg
VESA MOUNTING HOLES 400 x 400 Max
DISTANCE FROM WALL 26 mm
LOAD CAPACITY 40 Kgs
COLOUR OPTION Black

* Specifications are subject to changes without notice.

DIMENSION OVERVIEW

V545-W2

mm inch
A 430 16.93”
B 150 5.91”
C 50-600 1.97”-23.62”
D 450 17.72”
E 50-400 1.97”-15.75”

LCD/LED Display

all Mount

W

** For detail, updated Command Code and Application Software, please visit and download from www.abtussingapore.com

Model: AV545-W2

WARNING

1) Do not over tighten screws during inst
screws and greatly reduce their ability to support the weight of the display.

2). Ensure that the mounting screws are anchored to the center of studs. Use of
an “edge to edge” stude finder is highly recommended.

ABtUS SINGAPORE PTE LTD

allation. Over tightening can cause damage to the

www.abtussingapore.com

User Operation Guide

A to F

PACKAGING CONTENT

Item

A Bolt M5x16 4 set
B Bolt M5x30 4 sets
C Bolt M6x16 4 sets
D Bolt M6x30 4 sets
E Bolt M8x16 4 sets
F Bolt M8x30 4 sets

Item

G Lag bolt S

Item

H Concrete anchor 10x40 4 sets

Item

I Spacer with 3 holes 4 sets

Item

J 08.5x18x1.5 S

t8x50 4 sets

pacer 4 sets

INSTALLATION

s

Step 1: Mounting the wall board to the studs

Drill holes onto the wall and put 10x40 Concrete
anchor (H) in the holes. Fit the wall board to the wall
using ST8x50 Lag bolt (G) and 08.5x18x1.5 Spacer
(J) as shown above / right fig.

Keep the bubble level aline.

Item

K 08.5x18x1.5 Washer 4 sets

Item

L TV Board 2 set

** For detail, updated Command Code and Application Software, please visit and download from www.abtussingapore.com

s

Item

M W

all Board 1 set

Step 2:

Mount the
Fix the screw (A-F) and Spacer (I) to the TV set mounting holes as shown in above flg.

Step 3: Putting the wall mounted
to the wall board

Hand the TV set mounted on the TV board (L) to the wall
board (M). Finally, put the locking bar into the matched hole.

TV set onto the TV board using A-F bolt packed in accessories package.

TV board with screen

* Specifications are subject to changes without notice.