AbsolutAire AMC-1AD1 User Manual

AMC-1AD1/D2

Single/Dual Zone Multidrop Gas Monitor

Enclosure: ASA 61 gray enameled 16 gauge steel
Supply Voltage: 120 VAC, 60 Hz
Relay Contacts: Up to 4 DPDT 10A @ 250 VAC Res.

max relays, up to two thresholds per channel
and optional fault relay

Calibration: See AMC-122X sensor module manual
Dimensions: 20.32cm H x 20.32cm W x 12.70cm D

(8” x 8” x 5”)

Weight: 4.54 kg (10 lb)
Operating Temperature: -20°C to 40°C (-4°F to 104°F)
Storage Temperature: -40°C to 65°C (-40°F to 149°F)
Monitor Warranty: Two years
Indicators per Zone:

Red LED – Alarm
Yellow LED – Warning
Green LED

• LED On – Run

• LED Flashing – Fault

• LED Off - Off

Functional Features:
Alarms disabled during warm up
System test switch
User selectable:

• Activation delays, five minutes for Warning and/or

Alarm set points

• Minimum Run Timer

• 95 dBa Audio alarm with Warning and/or Alarm set

points
Hinged door
Optional latching relays with manual reset
Optional enclosure key lock

Concentration Display – Optional
Approvals: CSA 22.2 No. 205 and UL 508A

The AMC-1AD1/2 monitor provides one or two zones of
detection in conjunction with the AMC-122X Series of
multidrop sensor modules. It incorporates state of the art
sensing technology using micro-controller based design to
provide accurate gas detection capabilities within a compact
package.

Delivering up to two zones of gas detection, The AMC­1AD1/2 offers low cost and versatility, turning even the
simplest job into big savings.

Key Features:

• Up to 8 AMC-122X series multidrop modules per zone for

a maximum of 16 for two zones

• Easy to install and operate

• Up to 4 relays with ratings up to 10A @ 250 VAC Res.

• RS 232 COM port for logging and trending

Ordering Codes:

AMC-1AD1 (single zone, two relay version)

AMC-1AD2 (dual zone, four relay version)

North American Made

The Armstrong Monitoring Corporation 215 Colonnade Road South Ottawa, Ontario K2E 7K3

Tel: [phone] Fax: [phone] North America: 800.465.5777 www.armstrongmonitoring.com

AMC-1AD1 INTERNAL VIEW

SENSOR/ALARM
STATUS DISPLAY

TEST SWITCH

AUDIO ALARM

ALARM RELAYS
(2 OR 4 RELAYS)

AC PRIMARY

120 VAC, 60 Hz

NEUT.

HOT

GND

RELAY CONFIGURATION

COM.-A

B-COM.

NORMALLY DE-ENERGIZED

For more information:
Authorized Distributor

OPTIONAL

ZONE 1 INPUT

SHIELD

NEGATIVE (-)

SIGNAL (S)

N.C.-A

COIL

COIL

N.O.-A

AMC-122X SERIES

B-N.O.

B-N.C.

SENSOR MODULE

AMC-122X SERIES
SENSOR MODULE

Warranty: All Armstrong equipment is warranted against defects in materials and workmanship for two years
from date of delivery, except sensors. Please contact factory for sensor warranty. During the warranty period,
we will repair or replace components that prove, in our opinion, to be defective. We are not liable for
auxiliary interfaced equipment, nor consequential damage. All warranty items must be returned by prepaid
freight.

Note: Due to ongoing product development, the manufacturer reserves the right to change specifications without
prior notice. The information contained herein is based on data considered accurate. However, no warranty is
expressed or implied regarding the accuracy of this data.

POSITIVE (+)

ZONE 2 INPUT

POSITIVE (+)

SIGNAL (S)

NEGATIVE (-)

ZONE 2 IS IDENTICAL
AS ZONE 1

SHIELD

Rev. 070906

The Armstrong Monitoring Corporation 215 Colonnade Road South Ottawa, Ontario K2E 7K3

Tel: [phone] Fax: [phone] North America: 800.465.5777 www.armstrongmonitoring.com