AbsolutAire AMC 1022 User Manual

AMC 1022 (standard)

ECONOMICAL ALL-IN-ONE

GAS MONITOR

Enclosure: ASA 61 gray enameled 14 gauge steel
Supply voltage: 120 VAC, 60 Hz
Relay contacts: For low and high alarms, DPDT 10A
Calibration: Factory calibrated in L.E.L,

PPM or % by volume

Dimensions and weights: 20.5cm H x 15.5cm W x 9cm D

(8” x 6” x 3.5”) 8 lb

Operating temperature: 0°C to 40°C (32°F to 104°F)
Storage temperature: -40°C to 65°C (-40°F to 149°F)
Monitor warranty: Two years
Indicators per channel: Power on - green LED

Fail indicator - amber LED
Low alarm - yellow LED, five

minute time delay
High alarm - red LED, ten minute
time delay

Features: Alarms disabled during warm-up, test switch

Disable switches for audio alarm and time delays

Approvals: CSA and UL

Sensor element warranty:

Response time:

Sensor type:

Range:

Repeatability:

Accuracy:

Operating temperature:

Operating humidity:

Life expectancy:

Storage:

The Armstrong Monitoring Corporation 215 Colonnade Road South Ottawa, Ontario K2E 7K3

Tel: [phone] Fax: [phone] North America: 800.465.5777 www.armstrongmonitoring.com

Combustible gas Carbon monoxide Refrigerant gas Ammonia

0 - 50% L.E.L 0 - 100 PPM 0 - 1000 PPM 0 - 500 PPM

The AMC 1022 monitor is an economical all-in-one gas
detection system engineered to continuously monitor a variety
of toxic or combustible gases. Featuring LEDs for power, fail,
high and low alarm indication. The AMC 1022 is a complete
system including built-in sensor, two 10 amp relays (DPDT),
user selectable time delays, and audible alarm.

The method of operation of each detection point is such that
when the level of gas surpasses the preset gas concentration
settings, the circuitry will activate a remote alarm and/or an
exhaust system utilizing the 10 amp heavy duty relays. Sensor
reaction is instantaneous; however, alarms can be delayed
dependent upon user preference.

Note: For multi sensor applications refer to AMC 1022M, AMC 1030

and AMC 1022D technical data sheets

Metal oxide semiconductor

Two years

Less than ten seconds 80% in 30 seconds

10% of full scale

8% of full scale

-30°C to 50°C 0°C to 40°C
0 - 99% RH, non-condensing

Greater than five years

Unlimited

AMC 1022 WIRING DIAGRAM

For more information:
Authorized Distributor

Warranty: All Armstrong equipment is warranted against defects in materials and workmanship for two years
from date of delivery, except sensors. Please contact factory for sensor warranty. During the warranty period,
we will repair or replace components that prove, in our opinion, to be defective. We are not liable for
auxiliary interfaced equipment, nor consequential damage. All warranty items must be returned by prepaid
freight.

Note: Due to ongoing product development, the manufacturer reserves the right to change specifications without
prior notice. The information contained herein is based on data considered accurate. However, no warranty is
expressed or implied regarding the accuracy of this data.

The Armstrong Monitoring Corporation 215 Colonnade Road South Ottawa, Ontario K2E 7K3

Tel: [phone] Fax: [phone] North America: 800.465.5777 www.armstrongmonitoring.com

Rev. 010804