ABRACON ABBTM2 4G User Manual

(

ABBTM-2.4GHz-T

Bluetooth Module

Date of Issue: January 10th, 2012

Page (1) of (17)

Part Description:

Customer Part Number:

Abracon Part Number: ABBTM-2.4GHz-T

FCC ID #: A8RABBTM2-4G

(Please return this copy as a certification of your approval)

Approved by:

Approval Date:

26.9 * 13.0 * 2.5 mm SMT

Abracon Drawing # 453368

Source Control Drawing

26.9 * 13.0 * 2.5 mm SMT

Bluetooth Module

Customer Approval

ESD Sensitive

Revision #: Initial

PROPRIETARY NOTICE

These documents, and the contained information
herein, are proprietary and are not to be reproduced,
used or disclosed to others for manufacture or for
any other purpose, except as specifically authorized,
in writing, by ABRACON Corporation.

Revision History

Revision ECO Description Date Prep’d By Ck’d By Ck’d By Appr’d By

- Original Release 01/10/2012 SR SR CB JE

Abracon Corporation Headquarters:

30332 Esperanza
Rancho Santa Margarita, CA-92688
Ph: [phone]
Fax:

949) 546-8001

Internal Use Only

500135

ABBTM-2.4GHz-T

Bluetooth Module

Date of Issue: January 10th, 2012

Page (2) of (17)

1.0 Device Features

x Bluetooth Spec v2.0+EDR Compliant
x Class 2, up to 10-meter range
x Complete 2.4GHz Bluetooth® System
x Power management: low power 1.8V operation for Bluetooth® core
x Compact size: 26.9mm (L) x 13 (W) mm x 2.2mm (H)
x Bluetooth® Profile Supported: SPP,HSP, HFP, OPP,PBAP
x Internal antenna
x On-board flash memory (8Mbits)
x Supports multiple connections
x Surface mount module for embedded applications
x Several firmware options
x Rewritable flash memory for easy upgrade route
x Custom firmware production available

2.0 General Description

26.9 * 13.0 * 2.5 mm SMT

Abracon Drawing # 453368

ESD Sensitive

Revision #: Initial

Abracon's ABBTM is a complete Bluetooth® solution. It is built on CSR BC04-External Core
and 8Mbit Flash memory. It is a short range, compact and cost effective module, designed to be
embedded into electronic devices needing Bluetooth® connectivity.

The ABBTM module is a power class2 Bluetooth® device, and is in compliance with version

2.0+EDR of the Bluetooth® specification. It includes CSR BC04-External Core and 8Mbit Flash
memory, internal antenna, supporting circuitry, together with higher-level software protocols and
applications such as L2CAP, SDP, GAP, HSP, HFP, OPP and PBAP are resident in the flash memory.

Operating Frequency Band 2.4GHz ~ 2.48GHz Unlicensed ISM Band
Bluetooth Specification V2.0 + EDR
Output Power Class Class 2
Operating Voltage +3.3V
Host Interface USB 1.1/2.0 or UART
Audio Interface PCM Interface
Flash Memory Size 8 MB

3.0 Applications

x Hand-held devices
x Printers
x Personal Navigation Devices
x PDAs and other portable terminals
x MP3 headset