Page 1
Instructions for Use – Blue2 FT
Page 1 of 10
Instructions For Use
Blue 2 FT
Issue Date: June 30, 2023
Revision: 1.0
Model: 10000053
UDID: 00850011150276
Page 2
Instructions for Use – Blue2 FT
Page 2 of 10
INTENDED PURPOSE
PERFORMANCE CHARACTERISTICS AND INFORMATION FOR
HEALTH CARE PROFESSIONAL
Switch Type: Electronic
Switches: 2
Activation Type: Touch
Activation Force: 0-oz / 0-og
Activation Surface: 2.5-in / 63.5-mm diameter circle
External Switch Input: (2) 3.5-mm TS jacks
Connection: Bluetooth
Frequency: 2.4 Ghz
Battery: Li-ion rechargeable
Battery Charging Jack: USB C
Product Dimensions: 6.2-in L x 2.7-in W x 1.05-in H / 157.5-mm L x 68.6-mm W x 26.7-mm H
Product Weight: 5.7-oz / 158-g
Mounting Inserts: Qty 2
6-32 Thread
.25-in / 6.4-mm depth
3.54-in / 90-mm center distance apart
Suitable Operating Systems: Windows 11, macOS Ventura, iPadOS 16, iOS 16, ChromeOS
Material: Housing – ABS Plastic
Non-Skid Feet - Silicone
Suggested Operating Environment:
Ambient Temperature Range: 32°F – 95°F (0°C – 35°C)
Humidity: 10% - 95% (no condensation on device)
Suggested Transportation and Storage:
Ambient Temperature Range: 32°F - 104°F (0°C – 40°C)
Humidity: 10% - 95% (no condensation on the device)
RISKS, WARNINGS, AND CONTRA-INDICATIONS
Blue2 FT is neither waterproof nor completely water resistant. Do not immerse Blue2 FT in water or
any other liquid. Make sure that no liquids are spilled on Blue2 FT.
For individuals who are unable to use a computer, tablet computer, or smartphone with a typical
Human Interface Device (HID), Blue2 FT provides a way for them to use these devices. This includes
computer or tablet computer-based speech-generating devices.
CLINICAL BENEFITS OF THE DEVICE
Allows patients to access technology when they would not have the motor or cognitive skills to operate
another device.
Page 3
Instructions for Use – Blue2 FT
Page 3 of 10
Blue 2 FT is not recommended to be used as access to a call system.
Do not place threaded screw more than .5-in / 12-mm into housing. Damage to Blue 2 FT is likely to
occur.
Page 4
Instructions for Use – Blue2 FT
Page 4 of 10
DEVICE OVERVIEW
1
2
3
4
5
6
7
8
9
10
FeatherTouch Switch Top (S1)
FeatherTouch Switch Top (S2)
Visual Feedback Lights
Status Indicator Light
Keyboard Commands
Keyboard Command Mode Switch
Visual Feedback Switch
Auditory Feedback Switch
Blue2 FT On/Off Switch
Threaded Inserts For Mounting
Page 5
Instructions for Use – Blue2 FT
Page 5 of 10
11
12
13
14
15
USB C Charging Jack
External Switch Jack (S1)
External Switch Jack (S2)
Bluetooth Pairing Button
Keyboard Eject Button
Page 6
Instructions for Use – Blue2 FT
Page 6 of 10
USE INSTRUCTIONS
Compatibility
Blue2 FT will connect to most devices that support a Bluetooth keyboard. A switch control software on
the device you are trying to control is required and must be compatible with the keyboard commands
of Space, Enter, 1, 2, 3, or 4.
First Time Use
1. Turn your device on and go to its Bluetooth settings to turn Bluetooth on.
2. Turn Blue2 FT on. When Blue2 FT is turned on for the first time, the Status Indicator Light will
flash blue on and off for approximately one minute indicating that Blue2 FT is in pairing mode.
To restart pairing mode touch either switch top.
3. In your device’s Bluetooth settings, select BLUE2 FT XXXXX (X’s denote Blue2 FT’s serial
number). If more than one Blue2 FT is available, the serial number of your Blue2 FT is located
on the bottom of the Blue2 FT.
4. The Status Indicator Light will remain solid blue for approximately three seconds after your
Blue2 FT has successfully paired with your device.
a. The first time you use Blue2 FT the blue switch top (S1) is configured to use the
keyboard command Space and the yellow switch top (S2) is configured to use the
keyboard command Enter. Both keyboard commands can be changed.
b. After 20 minutes of non-use, Blue2 FT will go to sleep. To wake up, touch either switch
top.
5. Configure switch control settings on your device.
Continuously activating either switch top will continuously send the same keyboard command to your
device unless your switch control software is configured to behave differently.
Change Keyboard Command Used When a Switch is Activated
By default, Blue2 FT will use the keyboard command of Space when the blue switch top (S1) is
activated and Enter when the yellow switch top (S2) is activated. Both switches can be changed to use
the keyboard commands Space, Enter, 1, 2, 3, or 4.
To change the keyboard command a switch uses:
1. Turn Blue2 FT on.
2. Move the Keyboard Command Mode Switch to the on position. The background of the Keyboard
Command Mode Switch will turn green when turned on.
3. Activate the switch top on Blue2 FT or a wired switch plugged into Blue2 FT to select a new
keyboard command.
4. Move the Keyboard Command Mode Switch into the off position to save the keyboard command
you selected. The background of the Keyboard Command Mode Switch will turn red when
turned off.
Pair Blue2 FT With a New Device
Blue2 FT may only be paired with one device at a time. To pair with a new device, hold the Bluetooth
Pairing Button down for approximately 10 seconds. The Status Indicator Light will flash blue on and off
Page 7
Instructions for Use – Blue2 FT
Page 7 of 10
for approximately one minute indicating that Blue2 FT is in pairing mode. To restart pairing mode
touch either switch top.
Control Visual or Auditory Feedback
By default, when a FeatherTouch switch top on Blue2 FT is activated, auditory and visual feedback are
also activated. Auditory and visual feedback can be turned off or on by using the Visual Feedback
Switch or Auditory Feedback Switch on Blue2 FT. The background of the switch will turn green when on
and turn red when off.
Use a Wired Accessibility Switch With Blue2 FT
One or two wired accessibility switches can be used with Blue2 FT by plugging them into the S1 or S2
jack on Blue2 FT. When a wired accessibility switch is plugged into Blue2 FT, the FeatherTouch Switch
Tops and Visual Feedback Lights are deactivated. The Auditory Feedback will remain active when a
wired accessibility switch is used with Blue2 FT.
Wired accessibility switches must use a 3.5-mm / 1/8-in TS plug.
Keyboard Eject
To force an onscreen keyboard to display on your device, press the Keyboard Eject Button on Blue2 FT.
To hide the onscreen keyboard on your device, press the Keyboard Eject Button on Blue2 FT again.
Charge Blue2 FT
When Blue2 FT’s battery is low (approximately 5% remaining), the Status Indicator Light will double
flash red every second.
To charge your Blue2 FT, plug a USB C cable into the USB C Charging Jack. Connect the other end of
the USB C charging cable to an appropriate AC adapter.
When charging, the Status Indicator Light will flash red on and off. When fully charged, the Status
Indicator Light will remain solid red as long as Blue2 FT is plugged into an AC adapter.
Mounting
Connect with 6-32 screws. Do not place threaded screw more than .5-in / 12-mm into housing. For
screw length – Take thickness of material you are attaching Blue2 FT and add 0.25-in / 6.4-mm.
PREPARATORY TREATMENT
Cleaning and disinfecting your AbleNet assistive technology devices between uses is essential to the
health and safety of the user. To help fight against the spread of germs, here are some helpful steps to
cleaning and disinfecting your AbleNet device.
Always be sure to wear the appropriate personal protective equipment such as protective gloves and
safety glasses.
Page 8
Instructions for Use – Blue2 FT
Page 8 of 10
Cleaning Your Device
Before disinfecting your device, remove any dirt or debris that may be on the device.
1. Turn the device off and remove the batteries.
1. Remove any large chunks, visible heavy dirt, or debris that is attached to the device.
2. Wipe down the device with cleaning wipes.
3. Use a cotton swab soaked with cleaner to get into any tight areas that were not accessible with
the cleaning wipes.
4. Let the device completely dry.
Disinfect Your Device
Now that the device is clean, it is time to disinfect it. Changing protective gloves may be required
before disinfecting the device to ensure no dirt or debris is transferred back to the device.
1. Make sure the device is still turned off and that the batteries are removed.
2. Use a clean towel or wipes with Virucidal, Bactericidal, Pseudomonacidal, Tuberculocidal, or
Fungicidal to disinfect the surfaces of the device. It is important to note that these chemicals
only disinfect when they are wet and should be left wet on the device for at least 4-minutes.
3. Use a cotton swab soaked with Virucidal, Bactericidal, Pseudomonacidal, Tuberculocidal, or
Fungicidal to disinfect the tight areas that were not accessible with the towel or wipes. Make
sure the chemical stays wet on the device for at least 4-minutes.
4. Let the device air-dry entirely before using it.
5. If your device has a touch screen, use a liquid glass cleaner to remove any smudges or smears
before using.
TROUBLESHOOTING
Connection Verification
To verify if Blue2 FT is properly connected to your device:
1. Open the Bluetooth settings on your device and make sure the device called BLUE2 FT XXXXX
(X’s denote Blue2 FT’s serial number) is shown as connected.
2. Open any application on your device that allows you to type with a keyboard. Activate the
typing cursor in the application, then activate the blue (S1) and yellow (S2) switch tops on
Blue2 FT. If you see the keyboard commands of Space, Enter, 1, 2, 3, or 4 appear, Blue2 FT is
connected and functioning correctly.
Blue2 FT is Non-Responsive
When turned on, if Blue2 FT does not respond when you activate the blue (S1) and yellow (S2) switch
tops:
1. Make sure Blue2 FT’s On/Off Switch is in the on position. The background of the On/Off Switch
will display green when in the on position.
2. Make sure the Auditory Feedback Switch and Visual Feedback Switch are in the on position. The
background of both will display green when in the on position.
3. Charge the battery of your Blue2 FT.
Bluetooth Pairing
Page 9
Instructions for Use – Blue2 FT
Page 9 of 10
If Blue2 FT does not show up on your device as a device that can be paired with, it may already be
paired with another device or the Bluetooth pairing mode may have timed out. Hold the Bluetooth
Pairing Button down for approximately 10-seconds until the indicator light begins flashing blue.
Switch Control Software Not Responding
If your switch control software is not responding when you activate the blue (S1) and yellow (S2) switch
tops on Blue2 FT, verify that your switch control software is configured to respond to the keyboard
commands that Blue2 FT is set to.
PREVENTATIVE AND REGULAR MAINTENANCE
Clean the Blue2 if necessary. No scheduled maintenance is required.
REUSABLE
Blue2 FT should be sent back to the manufacturer for cleaning, testing and refurbishment before reuse
with another patient.
DEVICES USED TOGETHER WITH
Blue 2 FT can be used with any computer or tablet with Bluetooth capability and using the following
operating systems:
• Windows 11
• macOS Ventura
• iPadOS 16
• iOS 16,
• ChromeOS
PROPER DISPOSAL
Blue2 FT contains a lithium-ion battery and electronic components and should not be disposed of in
your normal home or business waste collection. Blue2 FT should be disposed of with a licensed
electronics recycler that accepts lithium-ion batteries.
WHEN TO CONTACT A HEALTHCARE PROFESSIONAL
If you have difficulty accessing the switches or need assistance with product placement.
Page 10
Instructions for Use – Blue2 FT
Page 10 of 10
Change in your condition.
NOTICE OF SERIOUS INCIDENT
Notice – If any serious incident has occurred while using this device, seek medical attention and then please report to AbleNet, Inc and your competent authority of the member state in which you are in.
REGULATORY INFORMATION:
FCC Title 47 Part 15b
Instructions for Use Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult AbleNet for help.
Loading...