ABL eMH3 WALLBOX TWIN SLAVE+ WITH CHARGING SOCKETS TECHNISCHES DATENBLATT

TECHNICAL DATA SHEET

Data sheet version 3W2253_E_a, current 06/2019, page 1

eMH3 WALLBOX

TWIN SLAVE+ WITH CHARGING SOCKETS

22 kW

Our eMH3 wallbox corresponds to the German "Eichrecht”
and impresses with an extremely clean and elegant de­sign. The color backlit symbols in the mirror-finish black
cover with silver frame indicate the current charging sta­tus. The eMH3 Twin has two Type 2 charging sockets with
a charging capacity of up to 22 kW. For access control, the
internal RFID module of the eMH3 Wallbox can be activat­ed at any time via software. Of course, the eMH3 comes
with our DC fault current detection installed as standard.
The wallbox is designed as a slave+ unit and is controlled
via a suitable master wallbox. The master-slave system is
suitable for group solutions that are billed via a back end
system and communicate via OCPP.

General information

Model eMH3

Model number 3W2253

EAN number 4011721175980

Commodity code 85371091

Packaging unit (PU) 1 unit

Packaging (dimensions HxWxD) 600x500x30 0mm

Components included eMH3 Wallbox, printed Quick Start Guide, mounting kit,

1 three-square socket wrench

Input/mains supply

Power supply

Rated voltage 230/400V

Rated current 32A

Rated frequency 50Hz

Upstream fuse 32A (required onsite), C characteristic recommended

Terminal block Direct connection to RCCB

Supply up to a maximum of 16 mm² or cable diameter ≤ 25 mm²

PE: feed-through terminal block

ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG

Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz

Phone [phone]
Fax [phone]

[e-mail]
www.abl.de

TECHNICAL DATA SHEET

Data sheet version 3W2253_E_a, current 06/2019, page 2

Output/vehicle connection

Connection system Two lockable Type 2 charging sockets in acc. with IEC62196-2

Output voltage 230/400V

Max. charging current 32A

Maximum output 2 x 11kW or 1 x 22kW

Protection/integrated components

RCCB RCCB, TypeA, 30mA

DC fault current detection electronic, I

Energy meter MID approved

Calibration law module Logging Gateway (LGW)

Load switching Installation contactor, 4-pole, 40A

Welding detection Contactor welding switches o the charging point

Temperature monitoring internal, charging current reduction or shut down

Δn d.c.

≥ 6mA

Charging monitor/status indicators

Charge controller EVCC2

Indication (operating state/fault indication) LED

Access control RFID MIFARE, QR code, SMS or smartphone app

Communication EV in acc. with IEC 61851-1 Mode 3

Communication EVSE RS485

Backend communication via Master

Standards/guidelines

IEC 61851-1

IEC 61439-7 ACSEV

in acc. with MessEV Modul B

Operating conditions

Storage temperature -30 to 85°C

Operating temperature -25 to 40°C in acc. with DIN EN 61851-1

Relative humidity 5 to 95%, no condensation

Class of protection I

Overvoltage category III

Degree of pollution 3

Degree of protection (housing) IP44/IP54 (plugged/unplugged)

Impact strength IK08

Maximum elevation ≤ 2,000m AMSL

Power dissipation 7W

-30 to 50°C with integrated derating function

ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG

Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz

Phone [phone]
Fax [phone]

[e-mail]
www.abl.de