ABL eMH1WALLBOX WITH CHARGING SOCKET TECHNISCHES DATENBLATT

TECHNICAL DATA SHEET

Data sheet version 502E_c, current 10/2017, page 1

eMH1 WALLBOX

WITH CHARGING SOCKET

11 kW

The eMH1 EVSE 502 is the smallest wallbox worldwide
with built-in Type 2 charging socket for semi-public in­stallations. The eMH1 is the perfect indoor and outdoor
solution for efficient EV charging in corporate, hotel, ex­hibition center or underground car parks. With a choice
of separately available charging cables (Type 2 to Type
2, Type 2 to Type 1), the system offers flexible charging
of various types of electric vehicles. The charging socket
is locked during the charging process to ensure a high
safety level for the user and the vehicle.

General information

Model eMH1

Part number EVSE 502

EAN number 4011721162584

Commodity code 85371091

Packaging unit (PU) 1 unit

Packaging (dimensions HxWxD) 400 x 400 x 285 mm

Includes EVSE 502 Wallbox, printed Quick Start Guide, drilling template,

2 keys

Input/Supply

Power supply for supply cable sizes up to 5 x 4 mm²

Rated voltage 230 / 400 V

Rated current 16 A

Rated frequency 50 Hz

Back-up fuse 16 A (required onsite), C characteristic recommended

Terminal block Direct connection to RCCB

PE: 6 mm² feed-through terminal block

ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG

Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz

Tel. [phone]
Fax [phone]

[e-mail]
www.abl.de

TECHNICAL DATA SHEET

Data sheet version 502E_c, current 10/2017, page 2

Output/vehicle connection

Connection system Single lockable Type 2 charging socket in acc. with IEC62196-2

Output voltage 230 / 400 V

Max. charging current 16 A

Maximum output 11 kW

Shut down (Standby) all contacts

Protection/integrated components

RCCB RCCB, Type A, 30 mA

DC fault current detection

Energy meter -

Installation contactor 4-pole (charging procedure activation)

electronic, I

Δn d.c.

≥ 6 mA

Charge control/status indicators

Charge controller EVCC

Communication in acc. with IEC 61851-1, Mode 3

Operating status indicator LED (stand-by, EV detected, charging)

Firmware indicator LED (flashes on startup)

Fault indicator LED (various flash patterns)

Interface RS485

Standards/Directives

IEC 61851-1 Ed 2.0:2010

Operating conditions

Storage temperature -30°C to 85°C

Operating temperature -30°C to 50°C

Relative humidity 5 to 95%, no condensation

Class of protection I

Overvoltage category III

Pollution degree 3

Degree of protection (housing) IP44

Power dissipation n/a

ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG

Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz

Tel. [phone]
Fax [phone]

[e-mail]
www.abl.de