Abey 3K6, 3K6-B, 3K6-BB, 3K6-BN, 3K6-GM Installation Guide
Pull-out Sink Mixer
Care and Maintenance
The materials and workmanship of the tapware is of high
quality and in order to maintain its appearance, it important is
not to wipe with abrasive cleaners. Cleaning of this product
should only be done with warm soap water on a regular basis.
Working Specifications
Maximum : Temperature - 80�°C
Pressure - 500kpa
Where normal work ing pressures exceed the maximum
stated above, pressure limting valve should be installed as
excessive pressure may damage the tap and void warranty.
Minimum : Temperature - 1 �°C
Recommended operating pressure: 150 to 5 00kpa.
NOTE:
This mixer must be installed with isolating stop taps in
accordance with local authority installation codes. All Abey
mixers must be installed by a licensed plumber, failure to do
so may void warranty. All Abey tapware must be installed
in accordance with AS/NZS 3500 series.
Notice
All pipework must be thoroughly flushed prior to installation,
1
as foreign materials may block the flow .
Aerator insert housing must be retightened to prevent
2
removal by hand.
Pressure - 150 kpa
NOTE!
min.
80mm
min.
15mm
max.
3Nm
1
Min.90mm
2
No (03) mounting seat is needed if the thickness is more
than 35mm.
mm
03
02
04
05
06
07
3
4
INS TALLATION INSTRUCTIONS
300-450
Loading...