Abee VT-100L User Manual

ABEE Voice Translator VT-100L
1. Microphone
2. Speaker
other side
4. Button receiving words from
myself
5. Turning down volume
6. Turning up volume
7. Repeat last translation sentence
8. Bluetooth Indicator (Blue)
9. Charging Indicator (Red)
10. Switch On/Off
11. Micro USB Port
Please be sure to download VT-100L App from Google Play or iOS App Store using with VT-100L before start using VT-100L, and follow the instruction in this manual. Please search VT-100L to get this App.
A. Parts of Voice Translator
User’s Manual
B. What’s in the Box
Voice Translator, Micro USB Cable, User’s Manual, Warrenty Card
C. Indicator Definition
1. Blue Indicator Flashing Rapidly: Bluetooth pairing is yet to be completed
2. Blue Indicator Flashing Slowly: Bluetooth pairing completed and is working
3. Red Indicator Flashing Rapidly: Power low and needs to be charged
4. Red Indicator Lit Constantly: Voice Translator is in charging
5. Red Indcator Extinguishied: Charging completed
D. Download & Install Specific APP “VT-100L
E. Connect / Reconnect VT-100L
1. Switch on VT-100L. Lauch Bluetooth on your cellphone and search [VT100L-XX]
for pairing.
2. VT-100L would broadcast “Paring Completed” after successfully pairing.
3. Open the specific App after pairing completed. [NOTE] 1. VT-100L would re-pair the device last time it paired after successfully
pairing. If not, please re-pair with the instruction above.
2. The bluetooth version VT-100L built-in is V4.0. Please make sure the bluetooth version on your cellphone before using VT-100L.
F. Translation with VT-100L
1. Open VT-100L App and wait until hearing “Connected”. [NOTE] a. User’s direction shows when launching the App for the 1st time. You may
press “Skip” to directly enter into the App.
b. VT-100L would use microphone, positioning function on your cellphone.
Thus, most cellphones would ask for authorizing these rights. Please press “OK” when seeing the relative message or you cannot enter VT-100L App nor using VT-100L.
2. Please confirm the dual languages on VT-100L App before starting. The defaul is
Chinese-English. To change languages, please press the arrow on the lower part to open [Language Setting] menu.
Loading...
+ 4 hidden pages