INSTRUCTION OF ELECTRONIC GUN CABINET
WARNING
Tip Over Hazard:
A child or adult can tip the safe and be killed or seriously injured.
Serious injury may occur to children and adults if not secured before installation.
Children should not play with or around the safe at any time.
Dear valued customer:
Thank you for choosing our products!You've taken an important step.Organize and protect your most valuable assets.Each of
our series of products is professionally manufactured and designed to provide safety.Please take the time to read and familiarize
yourself with the following pages of proper procedures for handling gun cabinets.Thank you again for choosing our products.
COMPONENT DESCRIPTION PARTS LIST
FIRST UNPACKING
In case you forget or lose your security password, we provide you with a spare key.The first time you open the box, you can use
the backup key to open the safe deposit box. Please follow the following steps :
1. Remove bonnet by turning bonnet counterclockwise.The lock can be hung on the connecting cable.
2. Insert the key into the keyhole and turn it 1/4 of a turn counterclockwise (until stopped).Turn the handle
clockwise and the door will open.
INSTALL THE BATTERY
Open the lock cover counterclockwise and put in the 9V battery, at which time the lock is powered on.
Follow the instructions for setting.
This electronic lock can be set with two sets of passwords, management code and user code.A number whose password length
is fixed to 6 digits.
SYSTEM INITIALIZATION
Press the set button to reset the management password to 123456,
Factory default management password 1-2-3-4-5-6, no user code.
PASSWORD SETTING (set in the same way as the administrative code and user code)
1. Enter 0-0-0-0-0-0 and enter the password setting mode directly. The yellow indicator light will be on and the sound mode will
remind you.
2. Enter the factory password "123456" (correct yellow light and red light will be on at the same time)
3.123456 If the password is correct, continue to enter the new 6-bit password and repeat twice.If the new password is the same
twice, the new password setting is complete and exit the password setting mode.If two new passwords are entered differently, the
setting is unsuccessful.(After entering the new password for the first time, the red and yellow lights are at the same time)
4. If the original password is entered incorrectly, the password setting mode will be quit, and there will be indicator light and
sound prompt.
ADD/REMOVE USER PASSWORD SETTINGS
1. Enter 0-0-0-0-0-0 in standby mode and enter password setting mode with indicator light and sound reminder.
2. Enter the management password. If it is correct, you can proceed to the next step.
3. Enter the key 1-1-* to enter the user code setting.Enter a 6-digit user password and repeat.
4. Enter the key 2-2-* to delete the user password.
Password setting and add or delete mode, enter the password sixth correct, then go directly to the next step, do not need * or #
confirmation.The connection process has an indicator light and an audio prompt.
PASSWORD AUTHENTICATION UNLOCK
1. In standby mode, directly enter the correct password and turn the handle clockwise to open the door.(Do not press * or # to
confirm.)
SOUND SETTINGS
In standby mode, press 633# to switch directly to sound or silence.
VOLTAGE PARAMETER
1. Rated voltage: 5-9V
2. Static power consumption: & LT;30uA
3. Underpressure point: 7±0.3V
MOUNTING INSTRUCTIONS
The safe may be mounted to a wall or floor.
·Drill the appropriate size holes for the anchors you are using
·Carefully press the anchor into the holes at this time
· Mount the safe by running screws from inside of the safe
and securing to anchors; ensure the safe is mounted securely Floor Mounting
·Use proper drill tools depending on the type of floor you are
mounting the safe (wood, tile, or concrete)
· Measure the location of the pre-set drill holes; mark their exact position onto the floor
·Drill the appropriate size holes for the anchors you are using
·Carefully press the anchor into the holes at this time
·Mount the safe by running screws from inside of the safe and securing to anchors; ensure the safe is mounted securely
Mounting Holes
~ Actual model may vary
Loading...