ABB ZS70-PE Technical Datasheet

Technical Datasheet Catalogue Page

74 2.91"

82.6 3.25"

39.5 1.56"

CE

CB

RoHS

1SNK 161 022 D0201 1SNK 161 022 S0201

ZS70-PE Screw Clamp Terminal Block

Ground

22 mm 0.866 in Spacing

3D CAD outline drawings available on "Control Product 3D" portal

Ordering Details Type Order Code EAN Code

Green-Yellow

ZS70-PE 1SNK 522 150 R0000 3472595221509 10 222.00

Declarations and Certificates Document Part Number

UE Directive 1SND 225 094 C1003

Third Party Certificate 1SND 161 035 A0200

RoHS 1SND 230 491 F0203

Features and Benefits

Reliable electrical and mechanical contact with the rail that exceeds the

requirements of IEC 60947-7-2 terminal block standard.

Pack

(ing)

Weight g (1 pce)

70 mm²

00 AWG

Atex Declaration 1SND 225 085 C1003

1

General Information

2

The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance.

Protection IP 10 NEMA 1

Rail

Wire stripping length

Operating tool

Torque

Mechanical endurance
of disconnect system

DIN3-TH35

25 mm 0.984 in

Screw clamp Screw rail contact

(Maximum value)

Allen Key

6 mm 0.236 in 4 mm 0.158 in

6.5 Nm 57.5 lb.in 2 Nm 17.7 lb.in

± 0.5 Nm ± 4.4 lb.in ± 0.5 Nm ± 4.4 lb.in

Material Specifications

Insulating material Polyamide
IRC 600 V
Flammability UL94 V0

NF F 16 101 I2F2

Needle ame test IEC 60695-11-5 Compliant

Connecting capacity per clamp

1 Rigid conductor 16-95 mm² 4-00 AWG
1 Flexible conductor without ferrule 16-70 mm² 4-00 AWG
1 Flexible conductor with ferrule

Ferrule maximum outer diameter

Multi Connecting capacity per clamp

2 Rigid conductors
2 Flexible conductors without ferrule
2 Flexible conductors with twin ferrule
Don't mix solid and flexible conductors in the same clamp
Don't mix solid or flexible conductors of different sizes in the same clamp

The "Connecting capacity with ferrule " data is guaranteed with ABB crimping tool PS-3

Cross section

Rated cross section 70 mm² 00 AWG
Maximum Cross section Manufacturer data 70 mm² Manufacturer data 00 AWG

Gauge B11 / 14 mm / 0.551 in / IEC 60947-7-1

Electrical characteristics

Current

Rated current IEC 60947-7-1

Field and factory wiring Cat.2 UL 1059
Factory wiring Cat.1 UL 1059

CSA-C-22.2 n° 158
Rated short-time withstand current 1 s (Icw) 8400 A
Short-time withstand current 0.5 s Manufacturer data

5 s Manufacturer data
10 s Manufacturer data
30 s Manufacturer data

1 mn Manufacturer data
Rated short circuit withstand CSA-C-22.2 n° 158
Max. current (45° temperature increase) / Max. cross section (mm²) Manufacturer data 70 mm²
Maximum short circuit current (1s) Manufacturer data 8400 A