ABB ZS4-SF1-R Technical Datasheet

Technical Datasheet Catalogue Page

32.9 1.30"

54.6 2.15"

47.1 1.85"

96.3 3.79"

90°

88.8 3.5"

59.7 2.35"

180°

RoHS

1SNK 161 035 D0201 1SNK 161 035 S0201

ZS4-SF1-R Screw Clamp Terminal Block

Fuse

8 mm 0.315 in Spacing

3D CAD outline drawings available on "Control Product 3D" portal

Ordering Details Type Order Code EAN Code

Grey-Dark Grey

ZS4-SF1-R2 1SNK 508 413 R0000 3472595084135 50 13.30

ZS4-SF1-R4 1SNK 508 415 R0000 3472595084159 50 13.30

Declarations and Certiﬁcates Document Part Number

UE Directive 1SND 225 098 C1002

Third Party Certiﬁcate 1SND 161 030 A0200

RoHS 1SND 230 491 F0203

Features and Beneﬁts

- Protect your circuit with 5x25 and 5x20 fuse terminal blocks (fuse not supplied with the terminal blocks),

- Compliant with IEC 60947-7-3 standard,

- Ease the test with built-in test socket screws,

- Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 mA).

Pack

(ing)

Weight g (1 pce)

4 mm²

10 AWG

General Information

The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance.

Protection IP 20 NEMA 1

Rail

Wire stripping length

Operating tool

Torque

Mechanical endurance of disconnect system

DIN3-TH35

11 mm 0.433 in

Screw clamp Screw rail contact

(Maximum value)

Flat screwdriver

3.5 mm 0.138 in

0.6 Nm 5.31 lb.in

± 0.1 Nm ± 0.885 lb.in ± 0.1 Nm ± 0.885 lb.in

Material Speciﬁcations

Insulating material Polyamide IRC 600 V Flammability UL94 V0

NF F 16 101 I2F2

Needle ame test IEC 60695-11-5 Compliant

Connecting capacity per clamp

1 Rigid conductor 0.2-4 mm² 24-10 AWG 1 Flexible conductor without ferrule 0.22-4 mm² 24-10 AWG 1 Flexible conductor with ferrule 0.22-4 mm² 24-12 AWG

Ferrule maximum outer diameter

5.5 mm 0.216 in

Multi Connecting capacity per clamp

2 Rigid conductors 0.2-1 mm² 24-18 AWG 2 Flexible conductors without ferrule 0.22-1 mm² 24-18 AWG 2 Flexible conductors with twin ferrule 0.22-1.5 mm² 24-16 AWG Don't mix solid and ﬂexible conductors in the same clamp Don't mix solid or ﬂexible conductors of different sizes in the same clamp

The "Connecting capacity with ferrule " data is guaranteed with ABB crimping tool PS-3

Cross section

Rated cross section 4 mm² 10 AWG Maximum Cross section Manufacturer data 4 mm² Manufacturer data 10 AWG

Gauge A3-B3 / 3 mm / 0.118 in / IEC 60947-7-1

Electrical characteristics

Current

Rated current IEC 60947-7-1 6.3 A

Field and factory wiring Cat.2 UL 1059 6.3 A Factory wiring Cat.1 UL 1059 6.3 A

CSA-C-22.2 n° 158 6.3 A Rated short-time withstand current 1 s (Icw) 480 A Short-time withstand current 0.5 s Manufacturer data

5 s Manufacturer data 10 s Manufacturer data 30 s Manufacturer data

1 mn Manufacturer data Rated short circuit withstand CSA-C-22.2 n° 158 Max. current (45° temperature increase) / Max. cross section (mm²) Manufacturer data 6.3 A 4 mm² Maximum short circuit current (1s) Manufacturer data 480 A

Short Circuit Current Rating (SCCR) SA UL 1059 supplement

With the following congurations:

Maximum voltage

Suitable conductor wire range

Fuse rating

Fuse designation

Fuse manufacturer name

Fuse type

Short circuit current

SCCR UL 1059

+ 3 hidden pages