ABB ZS10-PE User Guide

Technical Datasheet Catalogue Page

59.5 2.26"

26.7 1.05"

56.3 2.22"

48.8 1.92"

CE

CB

RoHS

1SNK 161 016 D0201 1SNK 161 016 S0201

ZS10-PE Screw Clamp Terminal Block

Ground

8 mm 0.315 in Spacing

3D CAD outline drawings available on "Control Product 3D" portal

Ordering Details Type Order Code EAN Code

Green-Yellow

ZS10-PE 1SNK 508 150 R0000 3472595081509 20 22.50

Declarations and Certificates Document Part Number

UE Directive 1SND 225 094 C1003

Third Party Certificate 1SND 161 019 A0201

RoHS 1SND 230 491 F0203

Features and Benefits

Improve the safety of your installation in the event of a short-circuit thanks

to our screwless rail contact:

- Rail contact non operator dependent,

- Performances above the requirements of IEC 60947-7-2 terminal block
standard,

- Secured snap on or remove from the rail,

- PE.N function available by combining ZS10-PE with ZS10-BL and 2 poles
jumper bar JB8-2.

Pack

(ing)

Weight g (1 pce)

10 mm²

6 AWG

Atex Declaration 1SND 225 085 C1003

1

General Information

2

The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance.

Protection IP 20 NEMA 1

Rail

Wire stripping length

Operating tool

Torque

Mechanical endurance
of disconnect system

DIN3-TH35

12 mm 0.472 in

Screw clamp Screw rail contact

(Maximum value)

Flat screwdriver

4 mm 0.157 in

1.3 Nm 11.5 lb.in

± 0.3 Nm ± 2.65 lb.in ± 0.3 Nm ± 2.65 lb.in

Material Specifications

Insulating material Polyamide
IRC 600 V
Flammability UL94 V0

NF F 16 101 I2F2

Needle ame test IEC 60695-11-5 Compliant

Connecting capacity per clamp

1 Rigid conductor 0.5-10 mm² 20-6 AWG
1 Flexible conductor without ferrule 0.5-10 mm² 20-6 AWG
1 Flexible conductor with ferrule 0.5-10 mm² 24-8 AWG

Ferrule maximum outer diameter

7.5 mm 0.295 in

Multi Connecting capacity per clamp

2 Rigid conductors
2 Flexible conductors without ferrule
2 Flexible conductors with twin ferrule
Don't mix solid and flexible conductors in the same clamp
Don't mix solid or flexible conductors of different sizes in the same clamp

The "Connecting capacity with ferrule " data is guaranteed with ABB crimping tool PS-3

Cross section

Rated cross section 10 mm² 6 AWG
Maximum Cross section Manufacturer data 10 mm² Manufacturer data 6 AWG

Gauge A5-B5 / 5.2 mm / 0.205 in / IEC 60947-7-1

Electrical characteristics

Current

Rated current IEC 60947-7-1

Field and factory wiring Cat.2 UL 1059
Factory wiring Cat.1 UL 1059

CSA-C-22.2 n° 158
Rated short-time withstand current 1 s (Icw) 1200 A
Short-time withstand current 0.5 s Manufacturer data

5 s Manufacturer data
10 s Manufacturer data
30 s Manufacturer data

1 mn Manufacturer data
Rated short circuit withstand CSA-C-22.2 n° 158
Max. current (45° temperature increase) / Max. cross section (mm²) Manufacturer data 10 mm²
Maximum short circuit current (1s) Manufacturer data 1200 A