Abb Powervalue 11 LI User Manual
—
END OF LIFE TREATMENT
PowerValue 11 LI Up
600-2000 VA 220/230/240 V IEC
PREPARED
2019-05-24 Product Marketing
APPROVED
2019-08-02 R&D
OWNING ORGANIZATION
ABB, Electrification – Smart Power business line
© Copyright 2019 ABB. All rights reserved.
STATUS
Approved
DOCUMENT KIND
End of life treatment
DOCUMENT ID.
4NWD005026
SECURITY LEVEL
Public
REV. A LANG.
EN
PAGE
1/10
POWERVALUE 11 LI UP
Contents
1. Important safety instructions ................................................................................................ ................. ...... 3
1.1. Symbols and warnings ......................................................................................................................................... 3
1.2. Safety rules ............................................................................................................................................................ 4
2. Introduction ........................................................................................................................................ ....... ...... 5
2.1. Related to the document ..................................................................................................................................... 5
2.2. Applicability ............................................................................................................................................................ 5
2.3. Target audience ..................................................................................................................................................... 5
2.4. Disclaimer ............................................................................................................................................................... 5
3. Recycling advice ..............................................................................................................................................6
4. Dismantling and recycling instructions ...................................................................................................... 8
STATUS
Approved
© Copyright 2019 ABB. All rights reserved.
SECURITY LEVEL
Public
DOCUMENT ID.
4NWD005026
REV. A LANG.
EN
PAGE
2/10
POWERVALUE 11 LI UP
1. Important safety instructions
THIS CHAPTER CONTAINS IMPORTANT SAFETY INSTRUCTIONS. READ IT CAREFULLY
BEFORE STARTING DISASSEMBLING THE UNIT.
1.1. Symbols and warnings
The following symbols are used in this manual, the list below explains each symbol.
THIS SYMBOL IN CONJUNCTION WITH THE SIGNAL WORD “DANGER” INDICATES AN
IMMINENT ELECTRICAL HAZARD.
FAILURE TO OBSERVE THE RELATED SAFETY NOTE MAY CAUSE INJURY, DEATH OR
EQUIPMENT DAMAGE.
THIS SYMBOL IN CONJUNCTION WITH THE SIGNAL WORD “WARNI NG” INDICATES A
POTENTIALLY DANGEROUS SITUATION.
FAILURE TO OBSERVE MAY CAUSE INJURY, DEATH OR EQUIPMENT DAMAGE.
DO NOT DISPOSE OF WITH ORDINARY TRASH.
STAT US
Approved
© Copyright 2019 ABB. All rig hts reserved.
SECURITY LEVEL
Public
DOCUMENT ID.
4NWD005026
REV. A LANG.
EN
PAG E
3/10
Loading...