How it Works
ABB
Loading...
NF22E
Data Sheet
7 pgs1.49 Mb0

ABB NF22E, NFZ22E Data Sheet

Technical Datasheet 28/03/11
CE
cULus
CCC
GOST
C-Tick
43
NO
NO
44
31
NC
NC
32
21
NC
NC
22
13
NO
NO
14
A1
A2
43
NO
NO
44
31
NC
NC
32
21
NC
NC
22
13
NO
NO
14
A1
A2
1SBC101427D0201
NF22E-.. / NFZ22E-.. Contactor Relays
AC / DC Operated - with Screw Terminals
NF(Z) contactor relays are used for switching auxiliary and control circuits.
3D CAD outline drawings available on «Control Product 3D» portal
Ordering Details
Number of contacts Control voltage Type Order code EAN Weight
1st stack Uc min. ... Uc max.
Pack
(ing)
1 piece
V 50/60 Hz V DC
kg
Contactor Relays
24...60 20...60
48...130 48...130
100...250 100...250
250...500 250...500
Note: NF22E-11 not suitable for a direct control by PLC-output. NF22E-11 available in some countries: please consult your ABB representative.
NF22E-11 1SBH 137 001 R1122 NF22E-12 1SBH 137 001 R1222 NF22E-13 1SBH 137 001 R1322 NF22E-14 1SBH 137 001 R1422
3471523100114 0.270 3471523100121 0.270 3471523100138 0.270 3471523100145 0.310
Contactor Relays - Low Consumption
- 12...20
24...60 20...60
48...130 48...130
100...250 100...250
Note: Only NFZ contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole
NFZ22E-20 1SBH 136 001 R2022 NFZ22E-21 1SBH 136 001 R2122 NFZ22E-22 1SBH 136 001 R2222 NFZ22E-23 1SBH 136 001 R2322
3471523101708 0.310 3471523101715 0.310 3471523101722 0.310 3471523101739 0.310
Certifications and Approvals
ABB | Technical Datasheet 1SBC101427D0201 1
2 Technical Datasheet 1SBC101427D0201 | ABB
Contact Utilization Characteristics according to IEC
Standards IEC 60947-1 / 60947-5-1 and EN 60947-1 / 60947-5-1 Rated operational voltage Ue max. 690 V Conventional free-air thermal current Ith θ ≤ 40 °C 16 A Rated frequency limits 25 ... 400 Hz Rated operational current Ie / AC-15
acc. to IEC 60947-5-1
Making capacity AC-15 10 x Ie AC-15 acc. to IEC 60947-5-1 Breaking capacity AC-15 10 x Ie AC-15 acc. to IEC 60947-5-1 Rated operational current Ie / DC-13
acc. to IEC 60947-5-1
Short-circuit protection gG type fuse 10 A Rated short-time withstand current I
cw
Minimum switching capacity 12 V / 3 mA
with failure rate acc. to IEC 60947-5-4
Non-overlapping time between N.O. and N.C. contacts ≥ 2 ms Heat dissipation per pole at 6 A 0.1 W Max. electrical switching frequency
24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz
500 V 50/60 Hz 690 V 50/60 Hz
24 V DC 48 V DC
72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC
for 1.0 s
for 0.1 s
AC-15 DC-13
6 A 4 A 3 A 2 A 2 A
6 A / 144 W
2.8 A / 134 W 1 A / 72 W
0.55 A / 60 W
0.55 A / 69 W
0.27 A / 60 W
0.27 A / 68 W
0.15 A / 60 W
0.13 A / 65 W
0.1 A / 60 W
100 A 140 A
-7
10
1200 cycles/h 900 cycles/h
Main Pole - Utilization Characteristics according to UL / CSA
Standards UL 508, CSA C22.2 N°14 Rated insulation voltage U
i
Max. rated voltage 600 V AC, 600 V DC Pilot duty A600, Q600
AC thermal rated current 10 A AC maximum volt-ampere making 7200 VA AC maximum volt-ampere breaking 720 VA DC thermal rated current 2.5 A DC maximum volt-ampere making-breaking 69 VA
600 V
ABB | Technical Datasheet 1SBC101427D0201 3
General Technical Data
B2
A
A
B1
C2
C1
Pos. 5
Pos. 3
Pos
. 2
Pos. 1 Pos. 1 ± 30°
+30° -30°
Pos. 4
Rated insulation voltage Ui
acc. to IEC 60947-5-1
acc. to UL / CSA
Rated impulse withstand voltage Uimp 6 kV Electromagnetic compatibility Devices complying with IEC 60947-1 / EN 60947-1 - Environment A Ambient air temperature close to contactor
Operation in free air -40 ... +70 °C Storage -60 ... +80 °C
Climatic withstand Category B according to IEC 60947-1 Annex Q Operating altitude ≤ 3000 m Mechanical durability
Number of operating cycles 20 millions operating cycles Max. switching frequency 6000 cycles/h
Shock withstand
acc. IEC 60068-2-27 and EN 60068-2-27
Mounting position 1
Closed or open
Shock direction
position
Vibration withstand 5 ... 300 Hz
acc. to IEC 60068-2-6
690 V 600 V
1/2 sinusoidal shock for 11 ms: no change in contact position
A
30 g
B1
25 g Closed position / 5 g Open position
B2
15 g
C1
25 g
C2
25 g
4 g Closed position / 2 g Open position
Magnet System Characteristics
Coil operating limits
acc. to IEC 60947-5-1
AC control voltage Rated control circuit voltage Uc 24 ... 500 V AC 50/60 Hz Coil consumption
Average pull-in value
Average holding value
DC control voltage Rated control circuit voltage Uc 12 ... 500 V DC
Coil consumption
Average pull-in value
Average holding value
PLC-Output control (NFZ) ≥ 500 mA 24 V DC Drop-out voltage in % of Uc min. ≤ 60 % Uc min Voltage sag immunity according to SEMI F47-0706 (NFZ) conditions of use on request Dips withstand (level 0% according to IEC 61000-4-11) (NFZ) 22 ms average for Uc = 24 ... 250 V 50/60Hz
-20 °C ≤ θ ≤ +60 °C
Operating time
between coil energization and:
between coil de-energization and:
N.O. contact closing N.C. contact opening N.O. contact opening
N.C. contact closing
AC supply
DC supply
at θ ≤ 60°C 0.85 x Uc min ... 1.1 x Uc max at θ ≤ 70°C 0.85 x Uc min ... Uc max
at θ ≤ 60°C 0.85 x Uc min ... 1.1 x Uc max at θ ≤ 70°C (NF) 0.85 x Uc min ... Uc max - (NFZ) 0.85 x Uc min ... 1.1 x Uc max
(NF) 50 VA - (NFZ) 16 VA (NF) 2.2 VA / 2 W - (NFZ) 1.7 VA / 1.5 W
(NF) 50 W - (NFZ) 12 ... 16 W (NF) 2 W - (NFZ) 1.7 W
40 ... 95 ms 38 ... 90 ms 11 ... 95 ms 13 ... 98 ms
Mounting Characteristics
Mounting positions
Max. add-on N.C. auxiliary contacts: see accessory fitting details for a NF contactor relay
Mounting distances The contactor relays can be assembled side by side. Fixing
on rail according to IEC 60715, EN 60715 35 x 7.5 mm or 35 x 15 mm by screws (not supplied) 2 x M4 screws placed diagonally
Loading...
+ 4 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use