ABB JB26 User Guide

Caution: Refer to Terminal Block Accessories Compatibility

JB26 Jumper Bars

Terminal Blocks Accessories

Features and Benefits

Screw jumper bars

Catalogue Page

1SNK 160 034 S0201

Technical Datasheet

1SNK 160 034 D0201

Main Technical Data Mounting Instructions

IEC cULus - CSA Ex e Tool

Rated current 232 A 230 A
Rated voltage

Impulse withstand voltage 8000 V
Protection IP NEMA

Material Specications

Ambient temperature min/max

Standard use 1000 V 600 V 630 V

Alternated poles

Insulating material Copper
Flammability
NF F 16 101
Service IEC 60068-2-1 -55 +110 °C -67 +230 F
Storage -55 +110 °C -67 +230 F
Installing

Not authorized

Torque

Ordering Details

JB26 Jumper Bars

Description Type Order Code

26 mm 1.02 in spacing

2 poles JB26-2 1SNK 926 302 R0000 5 41.20
3 poles JB26-3 1SNK 926 303 R0000 5 65.70
5 poles JB26-5 1SNK 926 305 R0000 5 115.70
10 poles JB26-10 1SNK 926 310 R0000 5 241.50

JB26 Mounting Instructions

- With at pliers, cut out the partitions
on the terminal block insulating body.
Be careful to not cut out the jumpered
terminal blocks at both ends of the
assembly,

Screw

Allen Key

4 mm

0.157 in

2 Nm ± 0.4

17.7 lb.in ± 3.54

(ing)

Pack

Weight

pieces g

(1 pce)

- Mount the jumper bar with the
recommended tool and torque.

All terminal blocks are certified with its compatible accessories. See complete information in "Technical Data Sheet"

1