ABB FLEXIBLE CABLE PROTECTION SYSTEMS Accessories Catalog
92 FLEXIBLE CABLE PROTECTION SYSTEMS FOR APPLICATIONS WITH HIGH REQUIREMENTS
—
Accessories
Introduction
For flexible and application friendly solutions. PMA offers a vast
array of practical accessories in order to complete the PMA cable
protection system.
We offer lock nuts produced from polyamide
or metal, thread reducers and enlargers,
conduit adapters, swivel adapters as well as
different mounting clips for conduits. All this
practical products will help to create the PMA
line for our customers even more flexible and
application friendly.
93ACCESSORIES - INTRODUCTION
94 FLEXIBLE C ABLE PROTECTION SYSTEMS FOR APPLICATIONS WITH HIGH REQUIREMENTS
—
Flat gaskets, metric, PG, NPT, GAS
Type SVN4
—
Type SVN4 - Flat thread gasket, metric/NPT/PG/GAS
Order no.
SVN4
Order no.
SVN4- M12 M12 x 1.5 1 2 . 0 2 0 . 0 1 . 5
SVN4- M12/02 M12 x 1.5 1 2 . 0 2 3 . 0 1 . 5
SVN4 -M16 M16 x 1.5 1 6 . 0 2 2 . 0 1 . 5
SVN4 -M16/02 M16 x 1.5 1 6 . 0 2 5 . 0 1 . 5
SVN4-M20 M20 x 1.5 2 0 . 0 2 7 . 0 1 . 5
SVN4-M20/02 M20 x 1.5 2 0 . 0 3 3 . 0 1 . 5
SVN4-M25 M25 x 1.5 2 5 . 0 3 5 . 0 1 . 5
SVN4-M25/01 M25 x 1.5 2 5 . 0 3 1 . 0 1.5
SVN4-M25/02 M25 x 1.5 2 5 . 0 3 9 . 0 1 . 5
SVN4-M32 M32 x 1.5 32.0 43.0 1.5
SVN4-M32/02 M32 x 1.5 32.0 49.0 1.5
SVN4-M40 M40 x 1.5 4 0 . 0 5 5 . 0 1 . 5
SVN4-M40/01 M40 x 1.5 40.0 51.0 1.5
SVN4-M40/02 M40 x 1.5 40.0 64.0 1.5
SVN4-M50 M50 x 1.5 5 0 . 0 6 9 . 0 1 . 5
SVN4-M50/01 M50 x 1.5 50.0 59.0 1.5
SVN4-M50/02 M50 x 1.5 50.0 74 .0 1.5
SVN4-M63 M63 x 1.5 63.0 75.0 1.5
SVN4 -07 07 1 2 . 5 1 6 . 5 1 . 5
SVN4-09 07 1 5 . 2 2 0 . 0 1 . 5
SV N4-11 11 1 8 . 6 2 4 . 0 1 . 5
SV N4-13 13.5 2 0 . 4 3 1 . 0 1 . 5
SV N4-16 16 2 2 . 5 3 1 . 0 1 . 5
SVN4-21 21 2 8 . 3 3 7 . 0 1 . 5
SVN4-29 29 3 7 . 0 4 8 . 0 1 . 5
SVN4-36 36 4 7. 0 57.0 1 . 5
SVN4-42 42 5 4 . 0 6 0 . 0 1 . 5
SVN4-48 48 59.3 69.0 1 . 5
Fits to thread
metric
Fits to thread
PG
Inside Ø
(mm)
Inside Ø
(mm)
Outside Ø
(mm)
Outside Ø
(mm)
Thickness
(mm)
Thickness
(mm)
Order no.
SVN4-G00 ¼ ˝ 1 3 . 2 2 0 . 0 1 . 5
SVN4- G01 ˝ 1 6 . 7 2 2 . 0 1 . 5
SVN4- G02 ½ ˝ 2 1 . 0 2 8 . 0 1 . 5
SVN4-G04 ¾ ˝ 2 6 . 5 3 4 . 0 1 . 5
SVN4-G06 1 ˝ 3 3 . 3 4 2 . 0 1 . 5
SVN4 -G07 1¼ ˝ 4 1 . 9 5 3 . 0 1 . 5
SVN4-G08 1½ ˝ 4 7. 8 6 2 . 0 1 . 5
SVN4-G09 2 ˝ 59.6 69.0 1 . 5
For seal ing of polyamide or metal threads of P MA fittings
For ingress protect ion at the thread up to IP6 8
For soli d sealing of une ven rou gh cont act areas aro und the t hread hole or when no co nstructive measures
for O- Rings are provid ed
NBR rei nforced with aramide fib res (asb estos-free)
Temperature ran ge: –5 0°C to +200°C , short-term to +350 °C
Note: Depending on flange s izes fl at thread gaskets can have diff erent w idths. Please ind icate fitti ng for
which gasket is needed for replacement orders
Fits to thread
GAS
Inside Ø
(mm)
Outside Ø
(mm)
Thickness
(mm)
—
Locking clips, water impact protection
Type AFN2, OVN2 & WPS
—
Type AFN2 - Universal safety clip
95LOCKING CLIPS, WATER IMPACT PROTECTION - T YPE AFN2, OVN2 & WPS
AFN2
Pre- insta lled in PMA con nectors IP 66 and I P68G T
Allows simple push-in assembly of PMA conduits
—
Type OVN2 - Oval clip
OVN2
Provi des reliabl e fixation of PMA cond uits within P MA IP68 fit tings
Order no.
dark grey
AFN 2- 07GT 07 G + T 1 4 . 0 1 4 . 0 7 . 0
AF N2 -10 GT 10 G + T 1 7. 5 1 7. 0 8 . 0
AF N2 -12GT 12 G + T 2 0 . 5 2 0 . 0 7. 3
AFN 2-17G T 17 G + T 2 6 . 5 2 2 . 0 8 . 0
AFN2-23GT 23 G + T 3 4 . 0 2 7 . 5 1 1 . 8
AFN2-29GT 29 G + T 4 0 . 5 3 2 . 0 1 1 . 8
AFN2-36GT 36 G + T 5 0 . 0 3 9 . 0 9 . 5
AFN2-48GT 48 G + T 62.0 47. 0 9 . 5
Order no.
dark grey
OVN2- 07 07 G + T 1 4 . 0 1 4 . 0 6 . 0
OVN2-10 10 G + T 1 7. 5 1 7. 0 7 . 0
OVN2-12 12 G + T 2 1 . 0 1 9 . 0 6 . 0
OV N2-17 17 G + T 2 6 . 5 2 2 . 5 7.0
OVN2-23 23 G + T 3 4 . 0 2 7 . 5 1 0 . 5
OVN2-29 29 G + T 4 0 . 5 3 2 . 0 1 0 . 5
OVN2-36 36 G + T 4 9 . 5 3 9 . 0 8 . 5
OVN2- 48 48 G + T 62.0 47.0 8.5
Fits to conduit size
Fits to conduit size
Width
(mm)
Width
(mm)
Length
(mm)
Length
(mm)
Thickness
(mm)NW Profile
Thickness
(mm)NW Profile
—
Type WPS - Water impact protection
WPS
Incre ased p rotec tion of PMAFI X fittings agains t water jet impact – inc rease d protectio n up to IP69
For increased ingress protection requirements regarding high pressure/steam jet cleaning
Base d on PMA FIX IP 68 sys tem
Two-piece wate r impac t protection with click c ap
Retrofit installation possible
Order no.
black
WPS-NW10 10 G + T 2 2 . 0 8 . 0
WPS-NW12 12 G + T 2 6 . 0 8 . 0
WPS-NW17 17 G + T 3 3 . 0 8 . 0
WPS-NW23 23 G + T 4 0 . 0 9 . 0
WPS-NW29 29 G + T 4 7 . 0 9 . 5
WPS-NW36 36 G + T 5 9 . 0 1 0 . 0
WPS-NW48 48 G + T 71.0 10.0
Fits to conduit size
Outside Ø
(mm)
Thickness
(mm)NW Profile
96 FLEXIBLE CABLE PROTECTION SYSTEMS FOR APPLIC ATIONS WITH HIGH REQUIREMENTS
—
Sealing caps, reducers
Type NVN3, NFN3 & NR
—
Type NVN3 - Sealing cap, reinforced
Order no.
NVN3
In connection with PMAFIX connectors („V“ series) and PMA corrugated conduits
For ingress protect ion IP 68 stat ic/IP67 dyn amic
Specially modified polyesterelastomer
Free from halog ens and cadmium
Fits both conduit prof iles – fine ( T) and coars e (G)
Temperature ran ge: – 40°C to +105°C
—
Type NFN3 - Sealing cap
Order no.
NFN3
In connection with PMAFIX connectors („F“ series) and PMA corrugated conduits
For ingress protect ion IP 67 static/IP 65 dynamic
Specially modified polyesterelastomer
Free from halog ens and cadmium
Fits conduit p rofiles – fi ne (T ) and coarse (G)
Temperature ran ge: – 40°C to +105°C
NVN3- 07 07 10 9 . 0
NVN3- 09 10 12 9 . 0
NV N3 -11 12 16 1 2 . 0
NV N3 -16 17 23 1 6 . 5
NVN3-21 23 25 1 3 . 0
NVN3-29 29 32 1 4 . 0
NVN3 -36 36 40 1 7 . 5
NVN3-48 48 50 17. 5
NFN3- 07 07 10 9 . 0
NFN3-09 10 12 9 . 0
NFN3 -11 12 16 9 . 0
NFN3 -16 17 23 9 . 0
NFN3-21 23 25 9 . 0
NFN3-29 29 32 9 . 0
NFN3-36 36 40 1 1 . 0
NFN3-4 8 48 50 11.0
Fits to conduit size
Fits to conduit size
Length
(mm)NW Metric
Length
(mm)NW Profile
—
Type NR - Reducer, PG
Order no.
NR
Reductio n of threaded or c learance holes to smaller P G thread sizes
High -grade, gl ass fi bre rei nforce d Polyamid 6
Temperature ran ge: –30 °C to +100°C
1109 N 11 09 2 2 . 5 1 0 . 5 2 4 . 5
1309N 13.5 09 1 5 . 0 1 0 . 0 2 6 . 0
1311N 13.5 11 2 4 . 0 1 1 . 5 2 6 . 0
160 9N 16 09 1 6 . 0 1 0 . 0 2 9 . 0
1611N 16 11 1 6 . 0 1 1 . 5 2 9 . 0
1613N 16 13.5 2 7 . 0 1 3 . 5 2 9 . 0
2113N 21 13.5 1 6 . 0 1 3 . 5 3 5 . 5
2116N 21 16 1 6 . 0 1 5 . 5 3 5 . 5
2921N 29 21 1 7. 0 2 2 . 0 4 3 . 0
3629N 36 29 24.0 30.5 54.0
Thread outside PGThread inside
PG
Length
(mm)
Inside Ø
(mm)
Outside Ø
(mm)
—
Enlargers, reducers, metric
Type ME & MR
—
Type ME - Enlarger, brass, metric thread
97ENLA RGER S, REDUCERS, METRIC - TYPE ME & MR
Order no.
ME
For enl argement of an existing thread
Nickel-plated brass
Hexagonal form
Temperature ran ge: – 60°C to +200°C
—
Type MR - Reducer, brass, metric thread
MR
Reductio n of threaded or c learance holes to smaller t hread s izes
Nickel-plated brass
Temperature ran ge: – 60°C to +200°C
Round form wi thout O -ring, h exago nal form with O -ring
M12M16M M12 x 1.5 5.0 M16 x 1.5 7.0 18 8 . 0 1 6 . 0
M16M20 M M16 x 1.5 5.0 M20 x 1.5 7.5 22 1 2 . 0 1 6 . 5
M20M25M M20 x 1.5 6.0 M25 x 1.5 8.0 27 1 5 . 0 1 8 . 5
M25M32M M25 x 1.5 7.0 M32 x 1.5 9.0 34 2 1 . 0 2 0 . 5
M32M40M M32 x 1.5 8.0 M40 x 1.5 10 42 2 6 . 0 2 3 . 5
M40M50M M40 x 1.5 8.0 M50 x 1.5 13 52 3 4 . 0 3 0 . 0
M50M63M M50 x 1.5 9.0 M63 x 1.5 16 65 44.0 3 2 . 5
Order no.
standard
M16M12M M16M12M/6 M16 x 1.5 M12 x 1.5
M20M12M M20 M12M/6 M20 x 1.5 M12 x 1.5
M20 M16M M20M16M/6 M20 x 1.5 M16 x 1.5
M25M16M M25M16M/6 M25 x 1.5 M16 x 1.5
M25M20M M25M20M/6 M25 x 1.5 M20 x 1.5
M32M20M M32M20M/6 M32 x 1.5 M20 x 1.5
M32M25M M32M25M/6 M32 x 1.5 M25 x 1.5
M40M25M M40M25M/6 M40 x 1.5 M25 x 1.5
M40M32M M40 M32M/6 M40 x 1.5 M32 x 1.5
M50M32M M50M32M/6 M50 x 1.5 M32 x 1.5
M50M40M M50M40M/6 M50 x 1.5 M40 x 1.5
M63M40M M63M 40 M/6 M63 x 1.5 M40 x 1.5
M63M50M M 63M 50 M/6 M63 x 1.5 M50 x 1.5
Thread outside Thread inside
Order no.
hexagonal
Thread outside
metric
Wrench
size
(mm)
Inside Ø
(mm)
Overall
length
(mm)Metric Length (mm) Metric Length (mm)
Thread inside
metric
Loading...