ABB EOH367R Data Sheet

DATA SHEET Date: 18.8.2015

Fusible heavy duty safety switch, single throw EOH367R

Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by ABB for any consequences arising out of the use of this material.

Type EOH367R Ordering number 1SCA132534R1001 EAN-code 6417019616445 Product Name Fusible heavy duty safety switch, single throw UL-file number E314773 CSA-file number 58077 Country of Origin Finland Type of enclosure NEMA Type 3R Rainproof General purpose current rating 600V 800A Number of poles 3 Net Weight 157.6lb / 71.475kg Gross Weight 169.3lb / 76.778kg Standards UL98, UL50, UL4248-1, NEMA KS1, CSA Instructions and manuals 34 EOH367-8JRS Type of disconnect OT800US30EOH Switch operating torque 354Ib.in / 40Nm Min. Electrical endurance power factor 0.7 - 0.8 600 op. cycles Mechanical endurance 3500 op. cycles Power loss / switch unit excluding fusegear 36W Application ambient air temperature -30°C/-22°F…40°C/104°F Standard Power rating Three phase /240V 100HP / 74.6kW Standard Power rating Three phase /480V 200HP / 149.2kW Standard Power rating Three phase /600V 250HP / 186.5kW Max. Power rating Three phase /240V 250HP / 186.5kW Max. Power rating Three phase /480V 500HP / 373kW Max. Power rating Three phase /600V 500HP / 373kW Max. Power rating /250Vdc 50HP / 37.3kW Max. motor FLA current Three phase /240V 600A Max. motor FLA current Three phase /480V 590A Max. motor FLA current Three phase /600V 472A Maximum fuse size 800A Fuse clips Class L Class L fuses, short circuit rating 480Vac 200kA Class L fuses, short circuit rating 600Vac 200kA Short circuit rating 250Vdc 100kA Terminal lugs for line and load side terminals OZXA-1200 Torque: Lug mounting line and load side terminals 443Ib.in / 50.1Nm Wire size 75°C Copper 4x500 kcmil

DATA SHEET Date: 18.8.2015

Fusible heavy duty safety switch, single throw EOH367R

Wire size 75°C Copper Cross section 1012mm² Wire size 75°C Aluminium 4x500 kcmil Wire size 75°C Aluminium Cross section 1012mm² Torque: line and load side wire tightening 500Ib.in / 56.5Nm Grounding terminal included in delivery 2xOZXG2 Grounding terminal wire range 250kcmil - AWG6 Torque: grounding wire tightening 275Ib.in / 31.1Nm Auxiliary contacts included Field-installable auxiliary contacts mountable in switch

mechanism are to be ordered separately.

Max. number of auxiliary contacts to be added 2no+2nc (early break) Enclosure construction type EOH7R Type 3R: Enclosures constructed for either indoor or

outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment; to provide adegree of protection against falling dirt, rain, sleet, and snow; and that will be undamaged by the external formation of ice on the enclosure.

Cabling direction TopBottom Enclosure colour ANSI 61 (light gray) External Enclosure width/W 22.05in / 560mm External Enclosure height/H 62.68in / 1592mm External Enclosure depth/D 8.54in / 217mm Cable outlets type Blank Cable outlets / top (øInch/mm) Blank Cable outlets / bottom (øInch/mm) Blank Number of door hinges 3 Number of door locking latches 5 Enclosure material specification Corrosion resistant steel, paint: polyester powder coating

70+/-10μm, material thickness: door 0.079in/2mm, enclosure

0.079in/2mm, fixing plates 0.118in/3mm, handle shield

0.059in/1.5mm.

Handle type Side-operated, fully insulated Handle color Black grip with red position ON indicator Handle material specification Handle grip: metallic insert, glass reinforced polyamide (PA

f1)/ Red handle indicator: polycarbonate (PC f1).

Type of packing Environment friendly corrugated cardboard Packingbox width 24.4in / 620mm Packingbox heigth 67.3in / 1710mm Packingbox depth 12in / 305mm Additional information Fusible heavy duty safety switch in painted steel sheet

enclosure. Grounding bus is included. Padlockable in OFF-position with 3 padlocks of bail max. diameter

0.25in/6.4mm. Releasable door interlocking mechanism. Factory-mounted fuse base and mounting screw kit for class L fuses are included. Field-installable accessories and fuses are to be ordered separately. Not for use as motor controller.

Description FI Sulakkeellinen turvakytkin raskaaseen käyttöön Description EN Fusible heavy duty safety switch Description FR Interrupteur avec fusibles de sécurité pour service intensif Description ES Interruptor de seguridad de servicio pesado con fusibles

+ 2 hidden pages