How it Works
ABB
Loading...
Enclosed cam switches
Catalog
70 pgs8.41 Mb0

ABB Rotary cam switches, Enclosed cam switches Catalog

Low Volta ge P ro du ct s
Switches
Rotary cam switches Enclosed cam switches
10...315 Amperes rotary cam switches
Rotary cam switches
OM, ON and OL
Contents:
Rotary cam switches
General ...............................................................................................................................4 - 5
Ordering details
Enclosed rotary cam switches and enclosures
1SCC302003C0201
3
ROTARY CAM SWITCHES
ROTARY CAM SWITCHES
Range OM, ON, OL 10, 25, 40, 63, 80, 125, 160, 200 and 315 (IEC) Amperes
ABB’s new OM, ON and OL rotary
cam switches offer a complete
range of cam switches for control,
instrumentation and motor
starting applications, maximizing
the benefits and optimizing your
use of assets. The standard cam
switches provide you with a
variety of functionalities for the
most common mounting types
and applications with minimum
footprint area.
A focused standard range covering most applications
ON-OFF switches Change-over switches Multi-step switches
Volt-ammeter switches Ammeter switches Voltmeter switches
Bypass switches Closed transition switches UPS switches
Reversing switches Pump-start switches Stop-start switches Ventilation switches
Binarycode switches
Captive plus-minus screws save installation time and
t
the integrated screwdriver guides make the use of motorized screwdrivers easy and stable.
Quick and easy to install
Captive plus-minus screws save installation time and the integrated screwdriver guides (available in sizes up to 160 Amps) make the use of motorized screwdrivers easy and stable. Lug terminals for connecting cable clamps and crimp lugs are available for the sizes from 125 Amps.
The double cam system shortens the multistep switch and enables the use of shallow enclosures. The sizes up to 40 Amps, including a black handle on a silver front plate, are suitable for snap on door mounting while the sizes from 63 to 200 Amps contain screw-mounted handles for door mounting.
Self lifting terminal
t
screws for fast cabeling
Standards
IEC/EN 60 947-1, -3 VDE 0660 Teil 107 UL508 CSA C 22.2.x No 14
Approvals
L’loyd’s Register of Shipping CCC UL508 CSA C 22.2.x No 14
4
t
Complete delivery includes handle and front plate. Snap-on mounting of contact block with interlocking in sizes OM, ON and OL 40. Protected interconnections.
t
Finger-proof tunnel terminals eliminate the risk of touching live parts without adding any protective covers.
t
Versatile selection of high protection degree handles.
High protection class
Finger-proof tunnel terminals (IP20) up to the size 160 A eliminate the risk of touching live parts without adding any protective covers. This ensures safe operation, protecting people and equipment. Versatile selection of high protection degree handles. The standard handle is IP65 and NEMA 4X protected. The handles with increased protection up to IP67 and IP69K available.
Camweb for special cam switches
Easy to specify and to order
The user-friendly Camweb configuration tool is very simple to use: it provides a new approach to ordering with easy specifications and a minimized total delivery time. The tool guides the user in order to avoid incompatible/impossible solutions, eliminating mistakes and automatically generating the type and the ordering code. The optional paste and order tool generates the price for immediate ordering. The order handling of the special cam switch is as smooth as for the standard products - the same information goes transparent and unchanged throughout the process.
What can be specified by Camweb?
Distinctive needs, such as front plate engraving, padlocking in various positions, key operation, key interlocking, auxiliary contacts for low ratings and special timings can be specified with the configuration tool. It is also possible to build switches with different chamber sizes in the same switch. Double and triple gang switches, as well as long cam switches with metallic shaft, can be specified with up to 60 contacts and 12 positions.
High performance contacts
The switches provide reliable isolation and stable contact positions with or without overlapping contacts. The well­enclosed contact chamber construction and special design of the OM’s contact tip with high contact pressure ensure increased contact reliability and a long life span. Due to the contact design, the switches are also suitable for very low voltages (5 V) and currents (5mA). Gold-plated contacts are available on request.
The switches are designed for resistive and slightly inductive motor loads having a high switching reliability in distinctive environments, providing you with added value. Breaking capacity tests performed, cover AC23 as well as DC categories.
Special cam switches for distinctive requirements
Special cam switches can be configured on the Internet by the Camweb configurator. The specification and ordering of special cam switches is as easy as selecting standard products!
The Camweb configuration tool can be found on the ABB Internet site or directly from the address: switchselector.com
5
Standard
CAM SWITCHES RANGE
CAM SWITCHES RANGE
Black handle and silver front plate with standard text are included.
t
OM
Cam switch size OM ON OL40 OL63 OL80N OL125 OL160 OL200 ON_M Ith / IEC 60947 [A] 10 25 45 63 80 150 175 315 25 UL 508 [A] 10 25 40 - - 125 160 200 25
Positions
t
ON
ON-OFF switches
Rotating angle 90, 0-position: 9 o’clock
Black handle 1 - 0 Key operated 1 - 0 1, 2 and 3- pole - - -
Rotating angle 90, 0-position: 12 o’clock
Black handle 1 - 0 Key operated 1 - 0 1, 2 and 3- pole - - -
Change-over switches
Rotating angle 60 - 0 - 60, with 0-position
Black handle 1 - 0 - 2 Key operated 1 - 0 - 2 1 and 3- pole - - -
Key operated, with two sided spring return 1R - 0 - 2 Rotating angle 60 - 60, without 0-position 1 - 2 1, 2, 3 and 4- pole 1, 2, 3 and 4- pole 1, 2, 3 and 4- pole With overlapping contacts 1 - 2 1, 2, 3 and 4- pole 1, 2, 3 and 4- pole - - With common center position and with
overlapping contacts
1 - 1+ 2 - 2 - 3 and 4- pole 3 and 4- pole -
R
Bypass switches
Without overlapping, for 3 and 4-pole net 1 - 0 - Bypass - 3 / 6- pole, 4 / 8- pole 3 / 6- pole, 4 / 8- pole - With overlapping, for 3 and 4-pole net 1 - Bypass - 3 / 6- pole, 4 / 8- pole 3 / 6- pole, 4 / 8- pole -
Multistep switches
With 0-position
2 - step switches 0-1-2
3- step switches 0-1-2-3 1, 2, 3 and 4- pole 1- pole 1-pole 1- pole
4- step switches 0-1-2-3-4 1, 2 and 3- pole - - -
5- step switches 0-1-2-3-4-5 1 and 2- pole - - -
6- step switches 0-1-2-3-4-5-6 - 1, 2 and 3- pole - -
7, 8, 9, 10 and 11- step switches 0-1-2-3-4-5-6-7-8...-11 - 1- pole - - Without 0-position
3- step switches 1-2-3
4- step switches 1-2-3-4 1, 2 and 3- pole - - -
5- step switches 1-2-3-4-5 1 and 2- pole - - -
6- step switches 1-2-3-4-5-6 - 1, 2 and 3- pole - -
7, 8, 9, 10, 11 and 12- step switches 1-2-3-4-5-6-7-8...-12 - 1- pole - -
Motor control switches
Ventilation switches A - 0 - 1/2 - 1/1 2- pole - 1- pole Reversing switches 1 - 0 - 2 - 2 and 3- pole 3-pole - - Star-delta switches 0 - Y - - 3- pole 3- pole - Pole-change switches (Dahlander) 0 - A - AYY - 3- pole 3- pole - Pumpstart switches 0 - 1 1- pole - - 1- pole Stop switches 0R - Stop 2- pole - - - Start switches Stop - Start - 1- pole - - -
0R - Start 1- pole - - - 0 -1R - Start 1- pole - - 1- pole Start - 1R - 0 - 2R - Start - 1- pole - - 1- pole
Voltmeter switches
4 positions, 3 phase - 3 wire, with 0-position 0, L1-L2, L2-L3, L3-L1 3- pole - - 3- pole 3 positions, 3 phase - 3 wire, without
0-position 6 positions, 3 phase to phase, 3 phase to
neutral, without 0-position 7 positions, 3 phase to phase, 3 phase to
neutral, with 0-position 7 positions, 3 phase to phase voltages for 2
circuits, with 0-position
L1-L2, L2-L3, L3-L1 3- pole - - 3- pole
L1-L3, L2-L3, L1-L2, L1-N, L2-N, L3-N
L1-L3, L2-L3, L1-L2, 0, L1-N, L2-N, L3-N
L1-L3, L2-L3, L1-L2, 0, L1-L3, L2-L3, L1-L2
Ammeter switches
For 3 current transformer circuits, with 0-position 0 - 1 - 2 - 3 1- pole 1 and 2- pole - - 1- pole
Volt-ammeter switches
3 phases and 3 current transformers with common pole
Binarycode switches
OFF - 1 - 2 - 3 3- pole - - -
0-1-2-3-4-5-6-7...-9...-11 - 1 and 2- pole - - -
6
t
OL40
t
OL63-80
t
OL125-160
t
OL200
t
ON_M
Door mounted DIN rail mounted
1, 2, 3, 4, 5, 6 and 8- pole 1, 2, 3, 4, 6 and 8- pole 1, 2, 3 and 6- pole
1, 2, 3, 4, 5 and 6- pole - 1, 2, 3 and 6- pole
1, 2, 3 and 4- pole 1, 2, 3 and 4- pole 1, 2, 3 and 4- pole
1 and 3- pole 1, 2 and 3- pole - 1- pole
1, 2, 3 and 4- pole - - 1- pole
1, 2, 3 and 4- pole - - 1- pole
3- pole - - 3- pole
3- pole - - 3- pole
4- pole - - -
7
ACCESSORIES
ACCESSORIES
for standard cam switches
Type_P_ or _R_
t
Type_P_ or _R_
t
t
Type_R_
Type_X_
t
Type_OLZ8_
t
Type_OLZ9_
t
Type_P2_ or _P4_
t
Type_ONZ20_
t
Type_OLZ20P_
t
Type_P_ or _R_
t
t
Type_P_ or _R_
Type_OLZ20R_
t
t
OM
t
ON
Handles
Snap on handle with front plate without engraving
Size 30x30, black, grey, red, red-yellow Size 48x48, black, grey, red, red-yellow x x Size 64x64, black, grey, red, red-yellow x x
Screw mounting handle with front plate without engraving
Size 64x64, black, grey, red, red-yellow Size 90x90, black, grey, red, red-yellow x Size 130x130, black, grey, red, red-yellow x
Snap-on handles with round escutheon plate
Black
Black, nose-type x Low extended handle knob, black, grey x x x Screw mounting hand grip handle, black, grey, red x x x Screw mounting ball grip handle x x x Screw mounting pistol type handle, black, red x x Screw mounting double lever handle, black, red x x Padlockable handle knob, without front plate, black, red-yellow x x x x Round padlockable handles for snap-on mounting, black, red-yellow x x Round padlockable handles for snap-on mounting for increased protection x x Round padlockable handles for snap-on mounting with door coupling x x x Round padlockable handles for srew mounting
Size 66x66, black, red-yellow
Size 90x90, black, red-yellow x
Front plates
Front plate, without engraving
Size 30x30, silver, yellow
Size 48x48, silver, yellow x x
Size 64x64, silver, yellow x x x
Size 90x90, silver, yellow x
Size 130x130, silver, yellow x
Size H=45mm, W=54mm, grey x
Additional lettering plates with frame
Lettering plate without engraving
Size 30x30, black or grey frame
Size 48x48, black or grey frame x x
Size 64x64, black or grey frame x x x Lettering plate without engraving x x x x
Other accessories
Front ring x x x Shaft sealing x x x x Spare key x x x Protective rear cover x x x x x Nut spanner tool x x x Adaptor ring x Base mounting kit x DIN-rail mounting plate x x Door coupling kits x x x x x Chamber to chamber connection jumpers x Shaft/suitable size [mm] - 6 6 6 8 10
t
Type_Z331_B
8
t
Type_Z331_RY
Front plates
t
Additional lettering plate
t
t
OL40
t
OL63-80
t
OL125-160
t
OL200
t
ON_M
Door mounted DIN-rail mounted
Type OM ON OL40 OL63...OL80N OL125...OL160 OL200 ON_M
x
x
x x x
x x x
x
x
Front ring
t
Spare key
t
Type_R_, Type_SF_
Protective rear cover
t
Nut spanner tool
t
Adaptor ring
t
22.5/30.5 mm
9
Special
CAM SWITCHES
CAM SWITCHES
To be specified by the Camweb configuration tool
switchselector.com
t
OM
t
ON
Mounting
Door mounted
Snap-on mounted handle
Padlockable x x
Round, padlockable x x
Square, padlockable x x
Srcew mounted handle x x x x x x
Round, padlockable x x x
Square, padlockable x x x
Round front ring x x
Key operated handle x x
Cylinder lock x x x x x
Push button lock x x x x
Pistol type handle x x
Long pistol type handle x
Base mounted x
Direct handle x x x
Snap-on mounted handle x x
Padlockable x x
Srcew mounted handle x x x
Door clutch x x x x
Type of contacts
Normal Number of contacts max. 16 max. 20 max. 20 max. 6
Double gang (Tandem) Number of contacts max. 40 max. 40
Triple gang Number of contacts max. 60 max. 60
Long shaft Number of contacts max. 60 max. 60
Connections
Standard box (tunnel) terminals x x x x x x
Fast on clips x x x
Double fast on clips x x x
Lug terminals x x
Other features
Spring return function x x x x x x x
Metallic camshaft x x
Gold contacts x x x x x x x
Enclosed cam switches x
Non return rotation x x
10
t
OL40
t
OL63-80
t
OL125-160
t
OL200
t
ON_M
Door mounted DIN-rail mounted
Type OM ON OL40 OL63...OL80N OL125...OL160 OL200 ON_M
x x x
Special cam switches
t
11
SOLUTIONS
SOLUTIONS
Standard handles
Cam switches up to the size OL40 are delivered with snap-on handles for 22.5 mm door drilling, while the larger handle sizes are screw mounted (4-hole mounting). The size OL200_ is delivered with pistol handle. Screw mounted handles, type _R_, are available for all sizes and they can be specified by the Camweb configurator. Protection degree IP65, NEMA4X.
Type_P_
t
Type _ R _
t
Type _ M _
Special handles for large switches
Grip and pistol type handles are available for ON_ and OL40...80 N cam switches. Pistol type and double lever handle is available for OL200. Protection degree is the same as for the front plate.
t
Type_ S _
t
Type_ Z2 _
t
Type_ R8 _
t
Type_ R9 _
12
tt
Type _ D2 or D4 _
Padlockable handles
Interlocking solutions
Padlockable handle knob, type Z_, ONZ20_, OLZ20_
Optional handle for replacing the standard knob handle. Two padlocks with bail diameter of 6 mm or three padlocks with 4 mm bail diameter. Padlocking is possible every 90 degrees at 9, 12, 3 and 6 o’clock positions. Available for the sizes ON…OL40 (6 mm shaft diameter). Suitable for both snap-on and screw mounted handles. Protection degree IP65, NEMA4X.
t
ONZ20_
t
OLZ20R_
t
OLZ20P_
Round padlockable handle, type _ 3 _
The round padlockable handle can be padlocked at 9 o’clock or when the switch is turned 90 degrees at 12 o’clock. For maximum three padlocks with max. 8 mm bail diameter. Available for sizes ON…OL160 as a snap-on or screw mounted version. Protection degree IP65, IP67, IP69K and NEMA4X.
Key operated cam switches, type _ K _
Key switches are operated by the key, which functions as the operating handle. Special key codes can be selected in camweb. The standard key removal is possible at every 90 degrees 12, 3, 6 and 9 o’clock or every 60 degrees from 1 o’clock onwards by Camweb only. The delivery contains two keys. In non-standard switches the key removal positions and keynumber can be specified by the Camweb configurator. The key switch is available for the sizes OM…OL40, also enclosed switches. Protection degree IP54.
Key interlocked cam switches with cylinder interlock, type _ Q _
The operation of the cam switch is interlocked with the cylinder lock below the switch. The interlocking is possible in one to four selected positions by the key. The possible interlocking positions are specified by the Camweb configurator. The delivery contains two keys. Available for the sizes ON…OL160. Protection degree IP65, NEMA 4X. Special key codes can be selected by camweb.
Padlockable pistol type handles, type _Z_, _Z20_
The pistol type handles offer a variaty of padlocking possibilities supported by the Camweb configurator. For max. 3 padlocks with 6 mm bail diameter. Protection degree IP65 and Nema 4X.
Non return rotation mechanism, type _N
Allows only clockwise rotation. The additional mechanism increases the switch depth.
Push button interlock, type _ U _
The push button releases the cam switch in one or several positions specified by the Camweb configurator. Auxiliary contacts are possible to operate with the push button.
13
SOLUTIONS
SOLUTIONS
Base mounted switches
Modular cam switches, type _ M _
Modular cam switches are available for up to 6 contacts according to the DIN-rail component standard. Clip-on mounting on DIN-rail. Protection degree IP20.
Base mounted cam switches, type _ B _
Base mounted cam switches are recommended to be specified for the desired shaft length or panel depth by the Camweb configurator. The shaft can be specified with the door clutch, which locks the door in the ON-position. Mounting kit type ONZ74 for door-mounted ON cam switches can be ordered as optional extra with shaft length 200 mm and DIN rail
Base mounted cam switches, type _ I _ with direct mounted handles are available as special cam switches. The standard or padlockable handle is fixed on the cam switch.
t
Base mounted cam switch with direct handle, type _I_.
t
Base mounted cam switch with round padlockable handle on the door, type _B_, ONZ331SP_.
14
t
Base mounted cam switch and door clutch, type_C_, ONZ371P_.
Cam switches with high number of contacts
Double and triple gang switches, types _ 2S _ or _ 3S _
Double and triple gang switches (2 x 20 or 3 x 20 contacts) are specified by the Camweb configurator for door and base mounting with the handle size from 64 mm. Grip handle, type H, as standard. Padlocking with square padlockable handles available too. Screw mounting.
Metallic shaft, type _ T _
ON cam switches are available with metallic shafts allowing max. 60 contacts to be assembled in one long cam switch. Specification by the Camweb configurator.
Spring return
Terminations
Quick connects, types _ F _ or _ D _
Cam switches are available with quick connects
6.3 x 0.8 or double FASTON-quick connects 2 x
3.15. Specification by the Camweb configurator.
Lug terminals, type _ L _
The OL125…160 cam switches are normally provided with protected box type termination. Lug terminals for cable lugs are specified by the Camweb configurator.
The spring return movement is always 30 degrees. The next step of the static position of spring return needs to be 90 degrees if not symmetrical design.
Round front ring
The round front ring replaces the square escutcheon plate. The assembly do not include position indications. The round front ring is available as standard switch and as special switch configurated by the Camweb. Type _ X _.
Gold contacts, type _ G _
The OM and ON switches can be supplied with gold contacts. Specification recommended by the Camweb configurator. See technical data.
Auxiliary contacts
The door mounted cam switches from 40 A up to 160 A can be provided with space saving auxiliary contacts.
15
Rotary cam switches Technical data
Ratings according to IEC60947-3
Size OM ON OL40 OL63 OL80N OL125 OL160 OL200
Impuls withstand voltage U
imp
Rated insulation voltage V 500 690 690 690 690 690 690 690
Rated operational voltage U
Rated thermal current I
Rated conditional short circuit current
e
th
I
(r.m.s.) kA 1
p
Max back-up fuse link A 10 25 40 63 80 160 200 315
Rated short time withstand
3s A 100 360 630 800 1280 1280 1600
current (r.m.s)
10s A 60 200 300 400 700 700 1000
30s A 32 120 200 250 400 400 600
60s A 30 80 100 150 280 280 400
Rated operational current I
e
AC1 400V A 10 25 45 63 80 150 170 250
AC21 400V A 10 25 45 63 80 150 170 250
AC11 220-240V A 2.5 5.5 14 15 20 45 45 80
380-440V A - 3.5 6.0 10 15 45 45 80
500V A - 4.5 7.0 12 18 40 40 70
AC22 220-500V A 10 20 40 63 80 150 170 250
660-690V A - 20 40 63 80 100 100 125
Rated operational current Time constant 0...1ms
1-contact in series DC21 24V A 10 20 40 63 80 130 150 250
1-contact in series 48V A 10 20 40 63 80 130 150 250
2-contact in series 60V A 10 20 40 63 80 130 150 250
3-contact in series 110V A 10 20 40 63 80 130 150 250
5-contact in series 220V A 10 20 40 63 80 130 150 250
9-contact in series 440V A 10 20 40 130 150 250
10-contact in series 600V A 16 25
Rated operational current Time constant 1...50 ms
1-contact in series DC22 24V A 6 10 32 32 40 115 130 200
1-contact in series 30V A 3 4.5 11 32 40 36 40 50
1-contact in series 40V A 3 4.5 11 32 40 36 40 50
2-contact in series 60V A 3 4.5 11 32 40 36 40 50
3-contact in series 110V A 3 4.5 11 32 40 36 40 50
5-contact in series 220V A 3 4.5 11 32 40 36 40 50
Rated operational power
AC23 3 ph. 220-240V kW 1.8 2.6 7.5 12 14.5 37 37 56
380-440V kW 3 7.5 15 18 22.5 75 75 75
500V kW - 4.8 15 22 25 75 90 85
660-690V kW - 4.8 15 17 23 50 55 90
AC23 1 ph. 110V kW 0.37 0.5 2.5 3 3.6 9 11 14
220-240V kW 0.75 0.9
400V kW 1.1 1.5 7.5 9 12.5 35 37 45
Rated operational power
AC2 3 ph. 220-240V kW 2.5 3.5 11 16 18 35 37 70
380-440V kW - 6 18.5 24 30 50 55 95
500V kW - 6 18.5 24 33 65 75 103
660-690V kW - 6 18.5 26 35 65 55 110
AC3 3 ph. 220-240V kW 1.8 2.2 7.5 10 12 20 22 47
380-440V kW 2.2 5.5 11 15 19 35 37 64
500V kW - 4 11 15 22 35 37 82
660-690V kW - 4 11 17 23 30 30 88
1)
400 V
kV 2.5 4 6 6 6 6 6 6
V 250 400 690 690 690 690 690 690
A 10 25 45 63 80 150 175 315
1)
1)
7
10 10 10 10 10 10
A 10 25 45 63 80 150 160 250
4 6 7.2 20 22 30
16
1SCC302003C0201
Rotary cam switches Technical data
Ratings according to IEC60947-3
Size OM ON OL40 OL63 OL80N OL125 OL160 OL200
AC3 1 ph. 110V kW 0.3 0.4 2.5 2.5 3 6 6 12
220-240V kW 0.55 0.75 4.0 5 6 11 11 24
400V kW 0.75 1.3 5.5 7.5 9 19 19 40
Terminals
Size OM ON OL40 OL63 OL80N OL125 OL160 OL200
Connecting screws M 2.5 3.5 5 5 5 5 5 10
Max cable cross section, solid/stranded mm
Contacts
Minimum voltage AC/DC V 5 5 5 5 5 5 5 5
Minimum current AC/DC mA 5 5 5 5 5 5 5 5
Standard butt contact with plain contact tip
Butt contact with peak type contact tip
Gold contacts (special) x x x x
Storing temperature
Operational temperature
1)
At 40°C, derating 0% At 70°C, derating 30% Current peaks up to 60°C, derating 0%
1)
2
1.5 4 6 16 16 70 70 150
AWG 14 14-12 14-8 10-6 10-6 12-2/0 12-2/0 kcmil 300
Size OM ON OL40 OL63 OL80N OL125 OL160 OL200
x x x x x x x
x
°C -40...+80 -40...+80 -40...+80 -40...+80 -40...+80 -40...+80 -40...+80 -40...+80
°C -30...+70 -30...+70 -30...+70 -30...+70 -30...+70 -30...+70 -30...+70 -30...+70
Ratings according to UL and CSA
Size OM ON OL40 OL63 OL80* OL125 OL160 OL200
Maximum operating voltage V 300 600 600 600 600 600 600
Pilot duty category CSA/UL VAC A300 A600 A600 A600 A600 A600 A600
Ampere rating
Rated power 3-phase 120V HP 1 1 5 8 15 15 32
Short cicuit ratings
Maximum prospective fault current kA 1 10 10 10 10 10 10
Maximum fuse size A 16 35(RK5) 50(RK3) 80(RK5) 150(RK5) 200(RK5) 250(RK5)
Switching frequency cycles/hour 150 150 150 150 150 150 150
*)
The ratings for the older type OL80, see ON1GB 07_03 catalogue
General use
at 600VAC UL A 10 25 40 80 125 170 200
1-phase 120V HP 0.33 1 2 4 10 10 -
UL 480V, CSA 600V UL 600V
240V HP 1 2 10 16 40 40 64
480V HP - 5 20 28 40 50 120
600V HP - 5 20 31 40 50 120
240V HP 1 1 3 8 20 20 -
480V HP - 2 10 - - - -
600V HP - 3 10 - - - 10
A A
10
-
25 16
40
­80
-
-
125
-
170
200
-
17
1SCC302003C0201
Rotary cam switches Ordering details
ON - OFF switches
Black handle and front plate with position indication are included. The type and the ordering number are for one piece.
Function Number Rated Type Order number Delivery Weight/ of thermal batch unit poles current [pcs] [kg] I
O-position: 9 o´clock, step angle 90°
Door mounted, snap-on mounted handle
0 - 1 1 10 OMA1PB 1SCA022531R3950 10 0.04 2 10 OMA2PB 1SCA022531R4090 10 0.04 3 10 OMA3PB 1SCA022531R4170 10 0.05 4 10 OMA4PB 1SCA022531R4330 10 0.05 5 10 OMA5PB 1SCA022531R4410 10 0.06 6 10 OMA6PB 1SCA022531R4500 10 0.06
0 - 1 1 25 ONA1PB 1SCA022531R4920 10 0.08 2 25 ONA2PB 1SCA022531R5060 10 0.09 3 25 ONA3PB 1SCA022531R5140 10 0.10 4 25 ONA4PB 1SCA022531R5220 10 0.11 5 25 ONA5PB 1SCA022531R5310 10 0.12 6 25 ONA6PB 1SCA022531R5490 10 0.12 8 25 ONA8PB 1SCA022684R5230 10
0 - 1 1 45 OL40A1PB 1SCA022755R7140 10 0.13 2 45 OL40A2PB 1SCA022755R7220 10 0.17 3 45 OL40A3PB 1SCA022755R7310 10 0.21 4 6 45 OL40A6PB 1SCA022755R7650 10 0.33 8
Door mounted, screw mounted handle
0 - 1 1 25 ONA1RB 1SCA100196R1001 10 0.08 2 25 ONA2RB 1SCA100206R1001 10 0.09 3 25 ONA3RB 1SCA100209R1001 10 0.10 4 25 ONA4RB 1SCA100214R1001 10 0.11
0 - 1 1 40 OL40A1RB 1SCA100297R1001 10 0.13 2 40 OL40A2RB 1SCA100298R1001 10 0.17 3 40 OL40A3RB 1SCA100305R1001 10 0.21 4 40 OL40A4RB 1SCA100306R1001 10 0.25
0 - 1 1 63 OL63A1RB 1SCA111537R1001 1 0.30 2 63 OL63A2RB 1SCA111538R1001 1 0.34 3 63 OL63A3RB 1SCA111539R1001 1 0.41 4 63 OL63A4RB 1SCA111540R1001 1 0.45 6 63 OL63A6RB 1SCA111541R1001 1 0.56 8 63 OL63A8RB 1SCA111542R1001 1 0.67
0 - 1 1 80 OL80NA1RB 1SCA111624R1001 1 0.30 2 80 OL80NA2RB 1SCA111625R1001 1 0.34 3 80 OL80NA3RB 1SCA111626R1001 1 0.41 4 80 OL80NA4RB 1SCA111627R1001 1 0.45 6 80 OL80NA6RB 1SCA111628R1001 1 0.56 8 80 OL80NA8RB 1SCA111629R1001 1 0.67
0 - 1 1 150 OL125A1RB 1SCA022790R1370 1 0.30 2 150 OL125A2RB 1SCA022790R1450 1 0.34 3 150 OL125A3RB 1SCA022790R1530 1 0.41 4 150 OL125A4RB 1SCA022790R1610 1 0.45 6 150 OL125A6RB 1SCA022790R1700 1 0.56 8 150 OL125A8RB 1SCA022790R1880 1 0.67
0 - 1 1 175 OL160A1RB 1SCA022790R5010 1 0.13 2 175 OL160A2RB 1SCA022790R5100 1 0.17 3 175 OL160A3RB 1SCA022790R5280 1 0.21 4 175 OL160A4RB 1SCA022790R5360 1 0.25 6 175 OL160A6RB 1SCA022790R5440 1 0.33 8 175 OL160A8RB 1SCA022790R5520 1 0.41
0 - 1 1 315 OL200A1RB 1SCA022790R5610 1 1.60 2 315 OL200A2RB 1SCA022790R5790 1 2.00 3 315 OL200A3RB 1SCA022790R5870 1 2.40 4 315 OL200A4RB 1SCA022790R5950 1 3.10 6 315 OL200A6RB 1SCA022790R6090 1 4.20 8 315 OL200A8RB 1SCA022790R6170 1 5.30
1)
45 OL40A4PB 1SCA022755R7490 10 0.25
2)
45 OL40A8PB 1SCA022755R7810 10 0.41
[A]
th
18
1SCC302003C0201
1)
4th pole early make, late break in A4_ and A8_ types
2)
7th and 8th pole early make, late break
Packing sizes for 10 pcs: OM 130 x 100 x 120 [mm] ON, OL40 250 x 100 x 110 [mm]
Rotary cam switches Ordering details
ON - OFF switches
Black handle and front plate with position indication are included. The type and the ordering number are for one piece.
Function Number Rated Type Order number Delivery Weight/ of thermal batch unit poles current [pcs] [kg] I
O-position: 9 o´clock, step angle 90°
See the O_A1_ - A6_ function charts on the previous page
Door mounted, round front ring
0 - 1 1 25 ONA1XB 1SCA022708R3920 10 0.08 2 25 ONA2XB 1SCA022708R5540 10 0.09 3 25 ONA3XB 1SCA022708R5620 10 0.10 4 25 ONA4XB 1SCA022708R5710 10 0.11
Door mounted, key operated, withdrawable in both positions
0 - 1 1 10 OMA1KB 1SCA022531R4760 10 0.06 3 10 OMA3KB 1SCA022531R4840 10 0.07
0 - 1 1 25 ONA1KB 1SCA022531R5570 10 0.11 3 25 ONA3KB 1SCA022531R5650 10 0.13
Door mounted, key operated, round front ring
0 - 1 1 25 ONA1KXB 1SCA022708R7830 10 0.11 2 25 ONA2KXB 1SCA100325R1001 10 0.12 3 25 ONA3KXB 1SCA022708R7910 10 0.13
DIN-rail mounted
0 - 1 1 25 ONA1M 1SCA022531R6030 10 0.09 2 25 ONA2M 1SCA022531R6110 10 0.10 3 25 ONA3M 1SCA022531R6200 10 0.11 6 25 ONA6M 1SCA022545R3020 10 0.12
[A]
th
O-position: 12 o´clock, step angle 90°
Door mounted, snap-on mounted handle
0 - 1 1 10 OMA01PB 1SCA022570R6680 10 0.04 2 10 OMA02PB 1SCA022570R6760 10 0.04 3 10 OMA03PB 1SCA022570R6840 10 0.05 4 10 OMA04PB 1SCA022570R6920 10 0.05 5 10 OMA05PB 1SCA022570R7060 10 0.06 6 10 OMA06PB 1SCA022570R7140 10 0.06
0 - 1 1 25 ONA01PB 1SCA022570R7220 10 0.08 2 25 ONA02PB 1SCA022570R7310 10 0.09 3 25 ONA03PB 1SCA022570R7490 10 4 5 25 ONA05PB 1SCA022570R7650 10 0.12 6 25 ONA06PB 1SCA022570R7730 10 0.12
Door mounted, key operated, withdrawable in both positions
0 - 1 1 10 OMA01KB 1SCA022570R7810 10 0.06 3 10 OMA03KB 1SCA022570R7900 10 0.07
0 - 1 1 25 ONA01KB 1SCA022570R8030 10 0.11 3 25 ONA03KB 1SCA022570R8110 10 0.13
DIN-rail mounted
0 - 1 1 25 ONA01M 1SCA022572R5630 10 0.09 2 25 ONA02M 1SCA022572R5710 10 0.10 3 25 ONA03M 1SCA022572R5800 10 0.11 6 25 ONA06M 1SCA022572R5980 10 0.12
1)
25 ONA04PB 1SCA022570R7570 10 0.11
Packing sizes for 10 pcs: OM 130 x 100 x 120 [mm] ON, OL40 250 x 100 x 110 [mm]
1)
4th pole with early make, late break
AO_types with simultaneous contacts
19
1SCC302003C0201
Rotary cam switches Ordering details
Change-over switches
Black handle and front plate with position indication are included. The type and the ordering number are for one piece.
Function Number Rated Type Order number Delivery Weight/ of thermal batch unit poles current [pcs] [kg] I
With 0-position, step angle 60°
Door mounted, snap-on mounted handle
1 - 0 - 2 1 10 OMU1PB 1SCA022532R5960 10 0.09 2 10 OMU2PB 1SCA022532R6000 10 0.11 3 10 OMU3PB 1SCA022532R6180 10 0.13 4 10 OMU4PB 1SCA022532R6260 10 0.14
1 - 0 - 2 1 25 ONU1PB 1SCA022532R7310 10 0.09 2 25 ONU2PB 1SCA022532R7400 10 0.11 3 25 ONU3PB 1SCA022532R7580 10 0.13 4 25 ONU4PB 1SCA022532R7660 10 0.14
1 - 0 - 2 1 45 OL40U1PB 1SCA022761R0990 10 0.17 2 45 OL40U2PB 1SCA022761R1020 10 0.25 3 45 OL40U3PB 1SCA022761R1110 10 0.33 4 45 OL40U4PB 1SCA022761R1290 10 0.41
Door mounted, screw mounted handle
1 - 0 - 2 1 25 ONU1RB 1SCA100216R1001 10 0.09 2 25 ONU2RB 1SCA100219R1001 10 0.11 3 25 ONU3RB 1SCA100220R1001 10 0.13 4 25 ONU4RB 1SCA100222R1001 10 0.14
1 - 0 - 2 1 40 OL40U1RB 1SCA100307R1001 10 0.17 2 40 OL40U2RB 1SCA100308R1001 10 0.25 3 40 OL40U3RB 1SCA100309R1001 10 0.33 4 40 OL40U4RB 1SCA100311R1001 10 0.41
1 - 0 - 2 1 63 OL63U1RB 1SCA110936R1001 1 0.34 2 63 OL63U2RB 1SCA110937R1001 1 0.45 3 63 OL63U3RB 1SCA111543R1001 1 0.56 4 63 OL63U4RB 1SCA111544R1001 1 0.67
1 - 0 - 2 1 80 OL80NU1RB 1SCA111643R1001 1 0.34 2 80 OL80NU2RB 1SCA111630R1001 1 0.45 3 80 OL80NU3RB 1SCA111631R1001 1 0.56 4 80 OL80NU4RB 1SCA111632R1001 1 0.67
1 - 0 - 2 1 150 OL125U1RB 1SCA022790R1960 1 0.34 2 150 OL125U2RB 1SCA022790R2000 1 0.45 3 150 OL125U3RB 1SCA022790R2180 1 0.56 4 150 OL125U4RB 1SCA022790R2260 1 0.67
1 - 0 - 2 1 175 OL160U1RB 1SCA022790R6840 1 0.34 2 175 OL160U2RB 1SCA022790R6920 1 0.45 3 175 OL160U3RB 1SCA022790R7060 1 0.56 4 175 OL160U4RB 1SCA022790R7140 1 0.67
1 - 0 - 2 1 315 OL200U1RB 1SCA022790R7220 1 2.00 2 315 OL200U2RB 1SCA022790R7310 1 3.10 3 315 OL200U3RB 1SCA022790R7490 1 4.20 4 315 OL200U4RB 1SCA022790R7570 1 5.30
Door mounted, round front ring
1 - 0 - 2 1 25 ONU1XB 1SCA022708R9370 10 0.09 2 25 ONU2XB 1SCA022708R9450 10 0.11 3 25 ONU3XB 1SCA022708R9530 10 0.13 4 25 ONU4XB 1SCA022708R9610 10 0.14
Door mounted, key operated, withdrawable in all positions
1 - 0 - 2 1 10 OMU1KB 1SCA022532R6340 10 0.07 3 10 OMU3KB 1SCA022532R6420 10 0.08
1 - 0 - 2 1 25 ONU1KB 1SCA022532R7740 10 0.12 3 25 ONU3KB 1SCA022532R7820 10 0.13
DIN-rail mounted
1 - 0 - 2 1 25 ONU1M 1SCA022532R8210 10 0.09 2 25 ONU2M 1SCA022532R8390 10 0.11 3 25 ONU3M 1SCA022532R8470 10 0.13 4 25 ONU4M 1SCA022534R2710 10 0.14
[A]
th
20
1SCC302003C0201
Packing sizes for 10 pcs: OM 130 x 100 x 120 [mm] ON, OL40 250 x 100 x 110 [mm]
Rotary cam switches Ordering details
Change-over switches
Black handle and front plate with position indication are included. The type and the ordering number are for one piece.
Function Number Rated Type Order number Delivery Weight/
With 0-position, with two sided spring return, step angle 60°
Door mounted, snap-on mounted handle
1
- 0 - 2
R
1
- 0 - 2R 1 25 ONURR1PB 1SCA022532R7910 10 0.09
R
1
- 0 - 2R 1 45 OL40URR1PB 1SCA022761R1370 10 0.17
R
Door mounted, screw mounted handle
- 0 - 2R 2 25 ONURR2RB 1SCA100223R1001 10 0.11
1
R
Door mounted, round front ring
1R- 0 - 2R 2 25 ONURR2XB 1SCA022709R0620 10 0.11
DIN-rail mounted
- 0 - 2R 1 25 ONURR1M 1SCA022568R3530 10 0.09
1
R
Without 0-position, step angle 60°
Door mounted, snap-on mounted handle
1 - 2 1 10 OMWS1PB 1SCA022532R6770 10 0.09
1 - 2 1 25 ONWS1PB 1SCA022532R8120 10 0.09
1 - 2 1 45 OL40WS1PB 1SCA022761R1610 10 0.17
Door mounted, screw mounted handle
1 - 2 1 25 ONWS1RB 1SCA100236R1001 10 0.09
1 - 2 1 40 OL40WS1RB 1SCA100316R1001 10 0.17
1 - 2 1 63 1 0.34
1 - 2 1 80 OL80NWS1RB 1SCA111647R1001 1 0.34
1 - 2 1 150 OL125WS1RB 1SCA022790R2340 1 0.34
1 - 2 1 175 OL160WS1RB 1SCA022790R8030 1 0.34
1 - 2 1 315 OL200WS1RB 1SCA022790R8460 1 2.00
of thermal batch unit poles current [pcs] [kg]
1 10 OMURR1PB 1SCA022532R6510 10 0.05
R
3 10 OMURR3PB 1SCA022532R6690 10 0.06
Ith [A]
2 25 ONURR2PB 1SCA022558R4040 10 0.11 3 25 ONURR3PB 1SCA022532R8040 10 0.12
2 45 OL40URR2PB 1SCA022761R1450 10 0.25 3 45 OL40URR3PB 1SCA022761R1530 10 0.33
2 10 OMWS2PB 1SCA022532R6850 10 0.11 3 10 OMWS3PB 1SCA022533R0610 10 0.13 4 10 OMWS4PB 1SCA022533R0700 10 0.14
2 25 ONWS2PB 1SCA022532R9360 10 0.11 3 25 ONWS3PB 1SCA022532R9440 10 0.13 4 25 ONWS4PB 1SCA022532R9520 10 0.14 5 25 ONWS5PB 1SCA022624R6440 10
2 45 OL40WS2PB 1SCA022761R1700 10 0.25 3 45 OL40WS3PB 1SCA022761R1880 10 0.33 4 45 OL40WS4PB 1SCA022761R1960 10 0.41
2 25 ONWS2RB 1SCA100240R1001 10 0.11 3 25 ONWS3RB 1SCA022874R9180 10 0.13 4 25 ONWS4RB 1SCA100254R1001 10 0.14
2 40 OL40WS2RB 1SCA100319R1001 10 0.25 3 40 OL40WS3RB 1SCA100320R1001 10 0.33 4 40 OL40WS4RB 1SCA100321R1001 10 0.41
OL63WS1RB 1SCA111595R1001 2 63 1 0.45 3 63 1 0.56 4 63
OL63WS2RB 1SCA111545R1001
OL63WS3RB 1SCA111546R1001
OL63WS4RB 1SCA111547R1001
1 0.67
2 80 OL80NWS2RB 1SCA111633R1001 1 0.45 3 80 OL80NWS3RB 1SCA111634R1001 1 0.56 4 80 OL80NWS4RB 1SCA111635R1001 1 0.67
2 150 OL125WS2RB 1SCA022790R2420 1 0.45 3 150 OL125WS3RB 1SCA022790R2510 1 0.56 4 150 OL125WS4RB 1SCA022790R2690 1 0.67
2 175 OL160WS2RB 1SCA022790R8110 1 0.45 3 175 OL160WS3RB 1SCA022790R8200 1 0.56 4 175 OL160WS4RB 1SCA022790R8380 1 0.67
2 315 OL200WS2RB 1SCA022790R8540 1 3.10 3 315 OL200WS3RB 1SCA022790R8620 1 4.20 4 315 OL200WS4RB 1SCA022790R8710 1 5.30
Packing sizes for 10 pcs: OM 130 x 100 x 120 [mm]
ON, OL40 250 x 100 x 110 [mm]
21
1SCC302003C0201
Loading...
+ 49 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use