ABB DRAF enclosed direct-on-line starters Catalog Page

9/6 ABB MOTOR PROTECTION AND CONTROL
DRAF enclosed direct-on-line starters
Experience reliable and easy to install motor starting
Improve installation efficiency
• Easy to connect and to operate
• Pre-wired control circuit and easy to follow wiring instructions
• Coil energy consumption down by 80%.
Reliable in harsh condition
High number of electrical and mechanical operations
• Robust IP66 and type 4X enclosure
• Double electrical insulation.
09
Continuous operation
• AF contactors manage voltage fluctuation, chattering free
• Protected motor with thermal overload relay
• Safety through coordinated product.
For machine or wall mounting
Main applications
Control of stand alone motors like for heat pumps, air conditioning units, small machine tools, compressors, pumping, irrigation...
1SBC133007S0201
ABB MOTOR PROTECTION AND CONTROL 9/7
Motor starting solutions up to 7.5 kW and 10 hp
AF 3-pole contactor with
4 cable entries
holding contact
Start contact block
1 PE and 1 neutral terminal
TF42 thermal overload relay
"I" ON button
"0" OFF/RESET button
09
1SBC133008S0201
Loading...
+ 3 hidden pages