Abb DHH805 User Manual

Instruction IN/DHH805/Conn-EN

DHH805

Quick Instruction Guide to DHH805 Connection and
Activation

DHH805 Configuration Device with
HART® Communications

Quick Instruction Guide to DHH805 Connection and Activation

DHH805 is delivered in an antistatic, polyester case along with
a rechargeable NiMH battery, a battery pack suited for 4 AA
alkaline cells (supplied inside the black cardboard box), a
universal power supply unit, a leadset to the transmitter, a USB
cable for PC connection, DHH805 with its protective rubber
shell, an antistatic carrying and a DVD-Rom containing the
most updated DD Library, PC-Tool software installer and
documentation.

To connect your DHH805 HART® Hand Held Terminal to the
DHH805 PC-Tool please follow the following instructions:

1. Install the DHH805 PC-Tool from the DVD-Rom you
have inside the device packaging: a driven installation
procedure starts and all the needed actions are explained
step by step.

Note. Minimum system requirements for DHH805 PC-Tool software are:
Hardware:
— Intel Pentium® D 2,8 GHz or AMD Athlon™ 64 X2 4400+ processor

— Screen resolution of 1024x768 or greater
— Broadband Internet connection
— DVD-ROM reader

Software:
— Latest Windows XP, Windows 7 or Windows Vista Service Packs

— 1 gigabyte (GB) RAM (32-bit) for XP version or 1.5 gigabyte (GB) RAM
(32-bit) for Windows 7 and Windows Vista.

— 200 megabytes (MB) to 2 gigabytes (GB) available hard disk space (32-bit)
— Microsoft NET Framework 3.5 or later

2. Unhook the elastic handle strap.

3. Remove the protective rubber shell

4. Release the battery pack fixing screws from the holes
located at the bottom of the battery pack seat.

5. Install the rechargeable battery pack and tighten the fixing
screws.

Note. Operation of the DHH805 is only allowed in safe areas.

6. In the black cardboard box inside the DHH805 suitcase,
you will find the battery charger and 4 power plug
adapters. Select the adapter that is compatible with your
AC power plug and snap it into place on the AC power
connection.

7. Open the plastic cover found on the top side of the
DHH805 and plug in the power cord of the battery
charger and connect the hand terminal to the PC via the
USB cable (see figure here below). After few seconds the
backlight will come on and DHH805 automatically turns
on.

8. A short message will be displayed on DHH805. Depress

the bottom right-hand corner navigation key (On) and
access the activation menu.

9. To activate the DHH805 select “Via PC-Tool” or
“Manually” in the activation menu on the display.

If you choose “Via PC-Tool” click on File > Home on the PC-Tool
top bar to refresh the software homepage and enable the
“Activate” button.

If you choose “Manually” you need to insert the activation code
(hyphens included) after selecting “Edit” under “Activation
Code”.

To proceed with activation ABB needs the DHH805 serial number
(printed on the white cardboard packing box or visible on the
DHH805 under Activation > Manually > Serial Number) as well
as user’s contact details.

Note. To perform the activation “Via PC-Tool” an internet connection may be
required. To activate DHH805 “Manually” obtain an activation code by contacting
ABB using the contact information below. You will require the device serial
number (printed on the white cardboard packing box or visible on the DHH805
under Activation > Manually > Serial Number):

— Europe: Luca Braga, phone [phone], fax [phone],
email [e-mail]

— America: Allen W. Hood, phone [phone], fax [phone],
email [e-mail]

— India: Sandeep Nagpal, phone [phone], fax [phone],
email [e-mail].

— China: FuJiang Duan, phone [phone], fax [phone],
email [e-mail]

10. After activation, the DHH805 is ready to communicate
with your HART® devices.

In order to connect the Hand-Held Terminal to the PC to
manage DD files or configuration, it is necessary to synchronize
them. To do this operation, select “Settings” on DHH805 main
menu and confirm with the right navigation key “Select”.

Scroll down to “Listening”, confirm with the right navigation
key “Select” and refresh PC-Tool homepage clicking
File > Home.

2 IN/DHH805/Conn-EN | Handheld communicator Model DHH805-A

Needing support? [e-mail]

Contact us

ABB Ltd.
Process Automation

Howard Road, St. Neots
Cambridgeshire, PE19 8EU
UK
Tel: [phone]
Fax: [phone]

ABB Inc.
Process Automation

125 E. County Line Road
Warminster, PA 18974
USA
Tel: [phone]
Fax: [phone]

ABB Automation Product GmbH

Schillerstrasse 72
D-32425 Minden
Germany
Tel: [phone]
Fax: [phone]

ABB S.p.A.
Process Automation

Via Statale 113
22016 Lenno (CO),
Italy
Tel: [phone]
Fax: [phone]

Note
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any
responsibility whatsoever for potential errors or
possible lack of information in this document.

We reserve all rights in this document and in the
subject matter and illustrations contained therein.
Any reproduction, disclosure to third parties or
utilization of its contents - in whole or in parts – is
forbidden without prior written consent of ABB.

3KXD311000R2001

Copyright© 2012 ABB
All rights reserved

InstructionI N/DHH805/Conn-X8

www.abb.com