ABB CP range Brochure
Primary switch mode power supplies
CP range
2 2CDC114038B0205
CP-D
The CP-D range of power supply units in MDRC design
(modular DIN rail components) fits into all domestic installation
and distribution panels.
CP-E
The CP-E range offers enhanced functionality while the number
of different types has been considerably reduced. Now all
power supply units can be operated at an ambient temperature
of up to +70 °C.
CP-T
The CP-T range of three-phase power supply units is ABB’s
youngest member of the power supply family.
CP-S
The CP-S range is ABB’s standard range, a high-end power
supply unit optimised for serial applications.
CP-C
The CP-C range’s pluggable function modules adapt these
power supply units exactly to your application’s needs. Of
course, all ABB power supply units feature primary switch
mode technology – environmentally sound and cost-efficiency.
This represents the highest level of innovative industrial
electronics.
ABB power supply units: CP range
Modern power supply units are a vital component in most areas of energy management and automation technology. ABB as your global partner in these areas pays
the utmost attention to the resulting requirements. Innovation is the key to a
substantial enlargement of our power supply product program:
2CDC 1140 38B0205 3
Application manual
For today’s applications, e.g. in control engineering, it is
essential to make the right decision regarding the selection
and planning of the power supply unit. Incorrect dimensioning
or incorrect connection of a power supply unit can seriously
affect the safety and/or availability of the entire installation.
ABB’s “Power Supply Units” application manual provides a
general overview of switch mode power supply units, thus
helping you to choose the ideal power supply unit and avoid
problems during engineering and commissioning. The manual
generally shows and explains the fundamental characteristics
of and the differences between power supply units, and provides a detailed introduction to the ABB product range on the
basis of the selection criteria. Finally, it describes and explains
application examples for engineering.
The manual is available in English and German.
English Version: 2CDC 114 048 M0202
German Version: 2CDC 114 048 M0102
Safety
Closed construction. Touch-proof connecting terminals.
Electrical isolation. Approval by independent testing institutes
with regard to all relevant international standards guarantees
maximum safety in operation.
Fast mounting
Fast, easy and fail-safe mounting on a DIN rail using sturdy
metal snap sliders.
Clear labelling
High ease of use thanks to clearly labelled terminals, thus
further facilitating wiring campaigns.
LED
OUTPUT OK LED for status indication of output.
Primary switch mode technology for maximum
efficiency
All CP range devices are power supply units with primary
switch mode technology. This technology reduces heat loss
and ensures maximum efficiency.
Wide range of AC or DC supply voltages
Due to the primary switch mode technology the CP range
power supply units can be operated with both AC or DC
supply voltages. Therefore they are often used in highly
fluctuating networks and battery-powered plants.
Ambient temperature range of up to +70°C
The lifetime of any electronic device depends on the weakest
electronic component. Due to the fact that heat stresses the
components, practically all components used in the CP
range power supply unit are rated for 105°C. This guarantees
a “long” lifetime.
4 2CDC114038B0205
The CP-D range power supply units
The CP-D range of modular power supply units in MDRC
design (modular DIN rail components) is ideally suited for
installation in distribution panels. This range offers
devices with output voltages of 12 V DC and 24 V DC at
output currents of 0.42 A to 4.2 A. Thanks to a high thermal
efficiency corresponding to low power and heat dissipation,
the devices can be operated without forced cooling. They
feature the U/I output characteristic (fold forward behaviour), which makes it possible to start up loads with high
inrush currents. All power supply units in the CP-D range
are approved according to all relevant international
standards.
Characteristics
- Output voltages 12 V, 24 V
- Adjustable output voltages (devices > 10 W)
-
Output currents 0.42 A / 0.83 A / 1.3 A / 2.1 A / 2.5 A / 4.2 A
- Power range 10 W, 30 W, 60 W, 100 W
-
Wide range input 100-240 V AC (90-264 V AC, 120-370 V DC)
- High efficiency of up to 89 %
- Low power dissipation and low heating
- Free convection cooling (no forced cooling with ventilators)
- Ambient temperature range during operation - 25...+70 °C
- Open-circuit, overload and short-circuit stable
- Integrated input fuse
- U/I characteristic (fold-forward behaviour at - overload – no
switch-off)
- LEDs for status indication
- Light-grey enclosure in RAL 7035
2CDC 1140 38B0205 5
Width and structural form
With a width of just 18 to 90 mm, the CP-D range switch
mode power supply units are ideally suited for installation in
distribution panels.
The light-grey enclosure (RAL7035) perfectly fits in with ABB’s
MDRC products such as RCBs and MCBs.
Approvals/marks
A UL 508, CAN/CSA C22.2 No.14
1)
H UL 1310, CAN/CSA C22.2 No.223
1) 3)
(Class 2 Power Supply),
H UL 60950, CAN/CSA C22.2 No.60950
1)
D GOST
E CCC
1)
a
b C-Tick
2)
1)
Approvals refer to rated input voltage U
IN
2)
Pending
3)
Except CP-D 24/4.2
Adjustable output voltage
The CP-D range types > 10 W feature a continuously
adjustable output voltage. Thus, they can be optimally
adapted to the application, e.g. compensating the voltage
drop caused by a long cable length.
LEDs for status indication
All actual operational states are displayed by front-face
LEDs, thus simplifying commissioning and troubleshooting.
Wide input range
Optimised for worldwide applications: The CP-D power
supply units can be supplied with 90-264 V AC or
120-370 V DC.
Loading...