Aaxa technologies P300 NEO User Manual

aaxa

TECHNOLOGIES

User Guide

Caution!

WARNING: Please use this product as instructed. Misuse may cause
injury or death.

DO NOT use while driving

DO NOT expose to water or wet
surfaces. Electric shock may occur

DO NOT expose the projected LED
image to your eyes or the eyes of
others

DO NOT block or restrict airow

from ventilation holes as this may
cause the projector to overheat

Keep the projector, battery, or
charger away from any heat sources

Caution for Battery Use

• Do not pierce or puncture the battery

with sharp objects

• Do not heat the product or expose it to

high temperature.

• Do not wet it or place it in any liquid

Caution for Headphone Use

• Prolonged use at high volume may impair your

hearing.

• High volume during walking or driving may

cause distractions and result in injury or death

Table of Contents

Chapter 1: P300 Neo at a Glance

P300 Neo Introduction
Remote & Touchpad
Accessories

Chapter 2: Getting Started

Powering On / Off
Focus Adjustment / Throw
Distance
External Inputs/Outputs
Connecting to a Computer VGA
Connecting to a Digital Input
Connecting to Composite Video
Connecting to Digital Input Video
Connecting to Speakers or
Headphones

Connecting a TF Card
Connecting a USB Stick

1

Chapter 3: Menu Screens

2

Main Menu

3

Video Player Menu
Photo Viewer Menu

4

Music Player Menu
Text Viewer Menu

5

Chapter 4: Setup Menu

6

Settings

7

Keystone Feature

9

Chapter 5: Technical Details

11

Troubleshooting

13

Specications

Notes

15

16
18

21
22
26
30
33

34
39

41
43
44

P300 Neo at a Glance

Main Unit Front/Back

Focus Adjustment

DC Port

Headphone Out

AV Port

Digital Input Port

Chapter 1

Touchpad

Power Switch

Mini-VGA Port

TF Card Slot

USB Port

Note: Boost Mode can only be used for 1 hour.

1

Remote & Touchpad

Power On/Off

Home

Main Menu Navigation

Volume Down

Both the touchpad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P300 Neo
unit.

NOTE: Pressing power on the remote will only put the projector in STANDBY mode.
Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector off.

Remote

Source Menu

Volume Up

Media Player

Menu Navigation
Back

>

>

OK

>

|||||

>

Menu Exit/Back

2

Accessories

Remote

A/V Cable

VGA Cable

(sold separately)

Power Adapter

Note: VGA Adapter Cable sold separately
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Additional accessories are available for purchase at www.aaxatech.com

Tripod

3

Getting Started

Powering ON the projector

1. Connect the power cord to the P300 Neo.

2. Connect the other end of the power cord into the wall power source.

3. Toggle the On / Off switch on the side of the projector to the “ON” position -- the
projector should automatically turn on.

Powering OFF the projector

1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will
fully turn off the projector.

Chapter 2

4

Focus Adjusment / Throw Distance

Focus Adjustment

• Spin the focus wheel up or down until the image becomes
clear.

Throw Distance Chart

Throw Distance

Units: Inches

19
29
38
48
57
67
76
86

Throw Ratio 1.2
Projection Angle: 100% Offset

*minimum throw distance: 10 inches

Diagonal Size

Units: Inches

20
30
40
50
60
70
80
90

DIAGONAL SCREEN SIZE

16:9 Aspect Ratio

5

External Inputs and Outputs

Headphones/speakers

Mini-VGA

TF Card

Composite Cable

Digital Input

USB Stick

6

Connecting to a Computer via VGA

Step 1:

Connect one end of the VGA Cable
to your computer’s VGA Adapter.

Step 2:

Connect the other end of the VGA
Cable to your P300 Neo’s VGA port.

Step 3:

In the Main Menu, select the “Inputs” icon and then the “VGA” Icon.

Select “VGA” icon Select “INPUT” icon

Note: VGA Adapter Cable sold separately

7

Connecting to a Computer Cont.

Step 4:

Enabling VGA on your Computer – To enable VGA output on your computer, most computers

require “turning on” the video output feature. Each computer is different. Please consult your

owner’s manual for instructions to enable VGA output. Below are standard instructions for a Win­dows 10 computer – not all systems are the same.

Step 5:

Press Windows+P to toggle
through display settings. Select
either “Duplicate” or “Extend” de­pending on your viewing option

*NOTE: different operating sys­tems may differ

Step 6:

1. Right click on computer
desktop and select “Screen
Resolution”

2. Display Properties window
will pop up

3. If a secondary monitor is
grayed out, click on it and se­lect “Extend these displays”
in the “Multiple Displays” drop
down

4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x720

8

Connecting to a Computer via Digital Input

Step 1:

Connect one end of the Digital Input Cable
to your computer’s Digital Input Adapter.

Step 2:

Connect the other end of the Digital Input
Cable to your P300 Neo’s Digital Input port.

Step 3:

In the Main Menu, select the “Inputs” icon and then the “Digital Input” Icon.

Select “INPUT” icon Select “DIGITAL INPUT” icon

9

Connecting to a Computer Cont.

Step 4:

Enabling Digital Video output on your Computer – To enable Digital Video output on your computer

most computers require “turning on” the video output feature. Each computer is different. Please

consult your owner’s manual for instructions to enable Digital Video output. Below are standard
instructions for a Windows 10 computer – not all systems are the same.

Step 5:

Press Windows+P to toggle
through display settings. Select
either “Duplicate” or “Extend” de­pending on your viewing option

*NOTE: different operating sys­tems may differ

Step 6:

1. Right click on computer
desktop and select “Screen
Resolution”

2. Display Properties window
will pop up

3. If a secondary monitor is
grayed out, click on it and se­lect “Extend these displays”
in the “Multiple Displays” drop
down

4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x720

10

Connecting to Composite Video

Step 1:

Connect the 3.5mm Composite AV
Cable to the back of the P300 Neo.

Step 2:

Connect the composite end of
the AV Cable (Red, White,Yellow)
to your device.

11

Connecting to Composite Video Cont.

Step 3:

In the Main Menu

Select “INPUT” icon Select “RCA”

Step 4:

Turn on your multimedia device.

Connectivity with multimedia devices

The P300 Neo can connect to many media devices including: iPod, iPhone, iPad,
VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game
consoles and other peripherals with ease.

*Some smartphones require video out capabilities to be displayed with the P300 Neo. Check
with your phone manufacturer.

12

Connecting to Digital Video Input

Step 1:

Connect one end of the Digital
Input cable to your P300 Neo’s
Digital Video Input Adapter.

Step 2:

Connect the opposite
end of the Digital Video
Input cable to your device.

Note: Apple devices require a specialized
Digital Input adapter (Sold separately
by Apple)

13

Connecting to Digital Video Input Cont.

Step 3:

In the Main Menu

Select “INPUT” icon

Select “DIGITAL INPUT” Icon

Step 4:

Turn on your multimedia device. If available, select 1280x720.

Connectivity with multimedia devices

The P300 Neo can connect to many media devices including: iPod, iPhone, iPad,
VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game
consoles and other peripherals with ease.

*Some smartphones require video out capabilities to be displayed with the P300 Neo. Check
with your phone manufacturer.

14

Connecting Speakers / Headphones

Step 1:

Step 2:

Step 3:

Connect your speakers/headphones
to the projector’s audio port.

Ensure that the projector and/or
the headphones are powered on.

Place the headphones on and enjoy!

*CAUTION: Prolonged use of headphones at a high

volume may impair hearing.

15

TF Card

How to insert your TF Card

• Slide in your TF card into the TF card
slot on the side of the P300 Neo (facing
down as shown in picture).

• Gently slide the TF card until it clicks
into place.

How to access your TF Card

• Once your TF Card has been inserted,
you can navigate to any media content
category in the main menu.

• After selecting the media content cat­egory, choose the TF card selection.

• You can now access the data on your
TF card through the onboard media
player

*Review the “Specications”

section of this manual to read

about the supported le

formats.

(up to 32 GB)

Microsoft Ofce and PDF le formats are not supported.

Note:

To view a slideshow convert your slideshow into JPEG

pictures rst.

16

TF Card Cont.

Media Player menu

• In the main menu select the type of le

you wish to play.

• Select the TF Card icon to acess your

les.

File Menu System

• The P300 Neo will show all folders and

les you have on your TF Card in the

C: drive.

• Use the touchpad to navigate to differ-

ent folders or les.

Return: Brings you
back to the main
menu

17

USB Drive

How to insert your USB Drive

• Slide your USB Drive into the USB
port (as shown in picture).

• Gently slide the drive until it cannot
go in any further.

How to access your USB Drive

• Insert your USB Drive into the
projector.

• Use the navigation pad to choose the
USB Drive icon from the main menu to

access your les.

• Choose your desired le.

*Review the “Specications”

section of this manual to read

about the supported le

formats.

(up to 32 GB)

Microsoft Ofce and PDF le formats are not supported.

Note:

To view a slideshow convert your slideshow into JPEG

pictures rst.

18

USB Drive Cont.

Media Player menu

• In the main menu select the type of le

you wish to play.

• Select the USB Drive icon to access

your les.

File Menu System

• The P300 Neo will show all folders and

les you have on your USB Drive

C: drive

• Use the touchpad to navigate to differ-

ent folders or les.

Return: Brings you
back to the main
menu

in the

19

TF Card and USB Drive

• If both TF Card and USB Drive are inserted,

depending on which one inserted rst, the
rst one will show in the C: drive and the

second one will show in the D: drive.

20

Menu Screens

Chapter 3

Main Menu

The P300 Neo features a built in PMP (Portable Media Player) function.

This function allows the projector to play videos, pictures, music les, and text directly

from your connected devices.

>

>

OK

>

|||||

>

Menu Exit/Back

• Press the left and right directional buttons to choose an icon from the main menu.

• To select a menu option, press the “OK” button in the middle of the navigation pad.

• To go back to the previous screen, press the “Back” button.

• To Jump back to the submenu, press the “Menu” button once.

• To return to the main menu, press and hold the “Return” button.

21

Video Player Menu

Opening a le:

• Select the “Video” icon (Fig. 3.1).

• From the submenu (Fig. 3.2), select the storage media with the stored les.

• Choose which le you wish to play.

Fig. 3.1

The P300 Neo will show all folders and les you have on your USB and/or TF

Card drive. (Fig. 3.2 assumes both USB and TF Card are inserted).

Previewing Files:

• Press the directional keys to highlight the item of interest.

• Wait 2-3 seconds and a preview of the video will show on the screen.

Fig. 3.2

22

Video Player Menu

While Playing Videos

While playing videos, the volume is adjustable. Further controls are available in
the video player submenu - which is accessed through the “OK” button.

>

>

OK

>

Volume Down

Volume Up

Positive Keystone Adjustment

Negative Keystone Adjustment

>

OK

Enter Video Player Submenu

• To open/hide the video playback menu, use the
“OK” and “Back” Buttons on the projector.

23

Video Player Submenu

Playing Videos

The Video Player Submenu can be accessed by pressing “OK” during video
playback. To exit the Video Player Submenu, press the “Back” button or wait
5 seconds. To navigate the Playback Menu, use the directional buttons on the
navigation pad or remote to highlight the option you wish to choose (Fig. 3.3).

>

>

OK

>

Volume Down

Volume Up

Positive Keystone Adjustment

Negative Keystone Adjustment

>

OK

Conrm selection

Fig. 3.3

00:00:59 / 00:04:20

Pause

FB

Prev. Next Stop Aspect

FF

24

Video Playback FAQ

How do I loop a video?

1. Choose either USB or TF Card
for playback

2. Navigate the folders until you

reach the le you wish to play.

3. Highlight the le you want to
play, then conrm the selection.

4. Move selection on video player
menu to “Repeat 1,” and con-

rm the selection.

5. The video will now loop after

playback is nished.

How do I preview a video?

1. Choose the “Videos” icon from the
main menu.

2. Navigate using either remote or

onboard buttons to the le you

wish to preview.

3. Highlight the le. *Do not select

the le, just highlight it.

4. Wait 3-4 seconds.

5. A preview screen will pop up on
the lower right for the video.

25

Photo Menu

Opening a File:

• Select the “Photos” icon from the main menu (Fig. 3.4).

• From the submenu (Fig. 3.5), select the storage media with the stored les.

• Choose which le you wish to play.

Fig. 3.4

The P300 Neo will show all folders and les you have on your USB and/or TF

Card drive. (Fig. 3.5 assumes both USB and TF Card are inserted).

Previewing Files:

• Press the directional keys to highlight the desired le.

• Wait 2-3 seconds and a preview of the picture will show on the screen.

Fig. 3.5

26

Photo Menu

While Viewing Pictures

While viewing pictures, further controls are available in the Photo Submenu ­which is accessed through the “OK” button.

>

>

OK

>

>

OK

Enter Photo Player Submenu

• To open/hide the Photo Playback menu, use

Previous Picture

Next Picture

the “OK” and “Back” Buttons on the projector.

Positive Keystone Adjustment

Negative Keystone Adjustment

27

Photo Submenu

Viewing Pictures:

The Photo Submenu can be accessed by pressing “OK” during picture slide-show
playback. To exit the Photo Submenu, press the “Back” button or wait 5 seconds.
To navigate the playback menu, use the directional buttons on the navigation pad
or remote to highlight the option you wish to choose (Fig 3.6).

>

>

OK

>

>

Fig 3.6

Pause Prev. Next Stop Repeat N

Previous Picture

Next Picture

OK

Conrm selection

Positive Keystone Adjustment

Negative Keystone Adjustment

00:00:59 / 00:04:20

Playlist

Msc Off

28

Photo Slideshow FAQ

How do I play a slideshow?

1. Choose either USB or TF Card
for playback

2. Navigate to the folder that
contains the pictures you wish
to view in the slideshow.

3. Conrm selection of the rst
picture.

4. Press “Play” in the photo menu

5. Slideshow will now play.

6. NOTE: Selecting “Repeat A”
will loop slideshow.

How do I manually control the
slideshow?

1. After selecting the photo you wish
to be displayed, you can press
“Play” to start the slideshow (as
outlined in the previous FAQ).

2. To manually control the slideshow,
you must stop the slideshow with
the “Stop” button.

3. You may use either the controls
on your remote or on top of the

projector itself to ip through the

pictures in the current playlist.

29

Music Player Menu

Opening a File:

• Select the “Music” icon (Fig. 3.7).

• From the Submenu (Fig. 3.8), select the storage media with the stored les.

• Choose which le you wish to play.

Fig. 3.7

The P300 Neo will show all folders and les you have on your USB and/or TF

Card drive. (Fig. 3.5 assumes both USB and TF Card are inserted).

Previewing Files:

• Press the directional keys to highlight the desired le.

• Wait 2-3 seconds and a preview of the audio will show on the screen.

Fig. 3.8

30

Music Player Menu

Listening to Audio:

To adjust the volume, use the left and right button on the projector or the volume
keys on the remote. To navigate the playback menu, push the “OK” button to
open the menu and use the directional buttons on the navigation pad or remote to
highlight the option you wish to choose (Fig 3.9).

• To open/hide the music playerback menu, use the “OK” and “Back” button on the
projector.

Fig. 3.9

>

>

OK

>

>

Volume Down

Volume Up

OK

Positive Keystone Adjustment

Negative keystone Adjustment

Conrm selection

00:00:59 / 00:04:20

Pause

FB

Mute

Prev. Next Stop R_ALL

FF

31

Music Playback FAQ

How do I loop a song?

1. Choose either USB or TF Card
for playback

2. Navigate the folders until you

reach the le you wish to play.

3. Highlight the le you want to
play, then conrm the selection.

4. Move selection on music player
menu to “Repeat 1,” and con-

rm the selection.

5. The song will now loop after

playback is nished.

How do I create a song playlist?

1. Insert your media device (either TF
card or USB) into computer.

2. Make a new folder on media device
(folder name will be the name of the
playlist).

3. Transfer songs from computer to the
new folder, name accordingly.

4. Remove media device from computer
and insert into projector.

5. Navigate to Audio section, then
choose appropriate media device.

6. Navigate to your playlist folder.

7. Start at rst song.

8. Playback will follow each successive
song on the list.

*To create a special order for the list, add nu-

merical numbering to the beginning of each le.

32

E-Book Viewer Menu

Opening a File:

• Select where the les are located from

the main menu.

• Select the “Text” icon (Fig. 3.10)

• Choose the le you wish to play.

Fig. 3.10

The P300 Neo will show all folders and les you have on your USB or TF Card

Drives.

Viewing Text Files:

The P300 Neo Micro Projector allows you to view text les. Select the le you want to

view in the le menu for the particular storage device on which the le is stored. You

can press the up and down arrow buttons on the remote to ip through the pages you

have in the present folder.

Note:

Microsoft Ofce and PDF le formats are not supported. To view a slideshow convert your slideshow

into JPEG pictures rst.

33

Setup Menu

The Settings Menu can be accessed by selecting “Setting” on the Main Menu

Within the settings menu, there are
four more submenus that allow you
to customize your P300 Neo to the
settings you want.

Chapter 4

Picture

• Picture Mode

• Color Mode

• Aspect Ratio

• Brightness Mode

• Projection

Sound

• Sound Mode

• Balance

• Auto Volume

Time

• Sleep Timer

• Auto Sleep

Option

• OSD Language

• Restore Factory Default

34

Picture Settings

Picture Mode

• Changes the picture mode to
different settings depending on

your usage

Color Mode

• Adjusts the color temperature
from warm to cool (red to blue)

Aspect Ratio

• Changes the aspect ratio of the
picture - Auto, 4:3, 16:9*, etc.

Brightness Mode

• Choose between Eco, Standard,
and Boost**

Projection

• Flips the projected image

*Caution: Some pictures may be cut off
when aspect ratio is set incorrectly

**Boost mode should only be used in low

temperature environments with adequate

clearance of exhaust / intake vents. A tripod
is highly recommended. DO NOT block

vents while operating in Boost mode.

Note: Boost Mode can only be used for 1 hour.

35

Sound Settings

Sound Mode

• Changes the sound mode depend­ing on what is currently playing

Balance

• Adjusts the sound balance manu­ally

Auto Volume

• With the Auto Volume On, the
video can be opened with volume
automatically

36

Time Settings

Sleep Timer

• Sets when projector goes to
sleep

Auto Sleep

• Sets auto sleep function where
projector will turn off when not in
use or if there is no signal.

37

Option Settings

OSD Language

• Changes the language of the device. Options include English, Spanish,
Chinese, German, French, Korean, Japanese

Restore Factory Default

• Restores the projector to factory settings

38

Keystone Adjustments

What is Keystoning?

“Keystoning” occurs when a projector is aligned non-perpendicularly to a screen,
or when the projection screen has an angled surface. The image that results

from one of these misalignments will look trapezoidal rather than square.

Digital Keystone Adjustments

By adding a special, selectable algorithm to the scaling, some new projectors
are able to alter the image before it reaches the projection lens. The result is a

squared image, even at an angle.

39

Keystone Adjustments FAQ

How to Correct Keystone

• If the image looks trapezoidal with
the base larger (as pictured right),
press the bottom button on the
directional pad on the top of the
P300 Neo until the keystone effect
corrects and the picture turns into

a square projection.

• If the image looks trapezoidal

with the top larger (as pictured
right), press the top button on the
directional pad on the top of the
P300 Neo until the keystone effect
corrects and the picture turns into

a square projection.

40

Technical Details

Chapter 5

Troubleshooting

IMAGE IS BLURRED

Possible Causes Solution

The Projector is not in focus Adjust the focus with the focus adjustment dial

until the image comes into focus

The Projector is offset from plane / angle of
operation

NO SYNC, NO SIGNAL

1. Be sure to setup the computer to enable a video signal output. On some lap­tops this is done by pressing and holding Function F5 key. If using the P300
Neo as an external monitor on Windows based systems, this can be done by se-

lecting “extend my desktop to this monitor”. The native resolution of the P300

Neo projector is 1280x720. Depending on the video driver different resolutions
may need to be selected for proper output.

Move the projector so that it is both 180 degrees
and on an evern plane with the screen. Or it can be
adjusted by keystone settings

41

Technical Details

Troubleshooting

THE PROJECTOR DOES NOT TURN ON

Possible Causes Solution

There is no power Check to ensure the power outlet source is good.

Projector is under STNADBY mode To power on the projector, press the power button

NO PICTURE / FILE NOT SUPPORTED

Possible Causes Solution

The video source is not properly connected or
selected

Check the power adapter to ensure a proper con­nection with the wall outlet as well as the projector.

Conrm that the unit is charged and has enough

power

on the remote

Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu

Incorrect le extension / Video is encoded with

incorrect codec

Please refer to “Specications” page to see which
le types and codex are supported. Verify that the
le was encoded properly.

42

Specications

Brightness:
Native Resolution:
Max Resolution:
Battery Runtime:
Contrast Ratio:
Aspect Ratio:
Projection Lens:
Image Size:
Lamp:

Video in:

Audio Output:
TF Card:

USB:

Dimensions:
Weight:
Supported File Formats:

*HDMI™ is a registered trademark of HDMI Licensing LLC. AAXA Technologies is not afliated with HDMI Licensing LLC.

420 Lumens
1280x720 (720p)
1920x1080 (1080P)
150 Minutes (Eco Mode)
1000:1
16:9
Manual Focus
10~120 inches
Triple RGB LEDs with Vibrant Color
Technology Life 30,000hrs
Composite A/V
Mini-VGA
Digital Input (Compatible with Full Size
HDMI™)

3.5 mm audio jack
TF Card Slot
(32GB maximum)
5 Pin USB 2.0 (Full Size)
(32GB maximum)

5.9” x 3.5” x 1.2”

0.84 lbs
MP3, WMA, OGG, WAV, JPG
AVI, BMP, GIF

43

Notes

44

Please direct all customer service inquiries to:

AAXA Technologies, Inc.

17691 Mitchell N., Unit #B

Irvine, CA 92614

[phone]

[e-mail]