AAXA P300 Neo User Manual

aaxa

TECHNOLOGIES

User Guide

Caution!

WARNING: Please use this product as instructed. Misuse may cause
injury or death.

DO NOT use while driving

DO NOT expose to water or wet
surfaces. Electric shock may occur

DO NOT expose the projected LED
image to your eyes or the eyes of
others

DO NOT block or restrict airow

from ventilation holes as this may
cause the projector to overheat

Keep the projector, battery, or
charger away from any heat sources

Caution for Battery Use

• Do not pierce or puncture the battery

with sharp objects

• Do not heat the product or expose it to

high temperature.

• Do not wet it or place it in any liquid

Caution for Headphone Use

• Prolonged use at high volume may impair your

hearing.

• High volume during walking or driving may

cause distractions and result in injury or death

Table of Contents

Chapter 1: P300 Neo at a Glance

P300 Neo Introduction
Remote & Touchpad
Accessories

Chapter 2: Getting Started

Powering On / Off
Focus Adjustment / Throw
Distance
External Inputs/Outputs
Connecting to a Computer VGA
Connecting to a Digital Input
Connecting to Composite Video
Connecting to Digital Input Video
Connecting to Speakers or
Headphones

Connecting a TF Card
Connecting a USB Stick

1

Chapter 3: Menu Screens

2

Main Menu

3

Video Player Menu
Photo Viewer Menu

4

Music Player Menu
Text Viewer Menu

5

Chapter 4: Setup Menu

6

Settings

7

Keystone Feature

9

Chapter 5: Technical Details

11

Troubleshooting

13

Specications

Notes

15

16
18

21
22
26
30
33

34
39

41
43
44

P300 Neo at a Glance

Main Unit Front/Back

Focus Adjustment

DC Port

Headphone Out

AV Port

Digital Input Port

Chapter 1

Touchpad

Power Switch

Mini-VGA Port

TF Card Slot

USB Port

Note: Boost Mode can only be used for 1 hour.

1

Remote & Touchpad

Power On/Off

Home

Main Menu Navigation

Volume Down

Both the touchpad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P300 Neo
unit.

NOTE: Pressing power on the remote will only put the projector in STANDBY mode.
Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector off.

Remote

Source Menu

Volume Up

Media Player

Menu Navigation
Back

>

>

OK

>

|||||

>

Menu Exit/Back

2

Accessories

Remote

A/V Cable

VGA Cable

(sold separately)

Power Adapter

Note: VGA Adapter Cable sold separately
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Additional accessories are available for purchase at www.aaxatech.com

Tripod

3

Getting Started

Powering ON the projector

1. Connect the power cord to the P300 Neo.

2. Connect the other end of the power cord into the wall power source.

3. Toggle the On / Off switch on the side of the projector to the “ON” position -- the
projector should automatically turn on.

Powering OFF the projector

1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will
fully turn off the projector.

Chapter 2

4

Focus Adjusment / Throw Distance

Focus Adjustment

• Spin the focus wheel up or down until the image becomes
clear.

Throw Distance Chart

Throw Distance

Units: Inches

19
29
38
48
57
67
76
86

Throw Ratio 1.2
Projection Angle: 100% Offset

*minimum throw distance: 10 inches

Diagonal Size

Units: Inches

20
30
40
50
60
70
80
90

DIAGONAL SCREEN SIZE

16:9 Aspect Ratio

5

External Inputs and Outputs

Headphones/speakers

Mini-VGA

TF Card

Composite Cable

Digital Input

USB Stick

6

Connecting to a Computer via VGA

Step 1:

Connect one end of the VGA Cable
to your computer’s VGA Adapter.

Step 2:

Connect the other end of the VGA
Cable to your P300 Neo’s VGA port.

Step 3:

In the Main Menu, select the “Inputs” icon and then the “VGA” Icon.

Select “VGA” icon Select “INPUT” icon

Note: VGA Adapter Cable sold separately

7

Connecting to a Computer Cont.

Step 4:

Enabling VGA on your Computer – To enable VGA output on your computer, most computers

require “turning on” the video output feature. Each computer is different. Please consult your

owner’s manual for instructions to enable VGA output. Below are standard instructions for a Win­dows 10 computer – not all systems are the same.

Step 5:

Press Windows+P to toggle
through display settings. Select
either “Duplicate” or “Extend” de­pending on your viewing option

*NOTE: different operating sys­tems may differ

Step 6:

1. Right click on computer
desktop and select “Screen
Resolution”

2. Display Properties window
will pop up

3. If a secondary monitor is
grayed out, click on it and se­lect “Extend these displays”
in the “Multiple Displays” drop
down

4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x720

8

Connecting to a Computer via Digital Input

Step 1:

Connect one end of the Digital Input Cable
to your computer’s Digital Input Adapter.

Step 2:

Connect the other end of the Digital Input
Cable to your P300 Neo’s Digital Input port.

Step 3:

In the Main Menu, select the “Inputs” icon and then the “Digital Input” Icon.

Select “INPUT” icon Select “DIGITAL INPUT” icon

9

Connecting to a Computer Cont.

Step 4:

Enabling Digital Video output on your Computer – To enable Digital Video output on your computer

most computers require “turning on” the video output feature. Each computer is different. Please

consult your owner’s manual for instructions to enable Digital Video output. Below are standard
instructions for a Windows 10 computer – not all systems are the same.

Step 5:

Press Windows+P to toggle
through display settings. Select
either “Duplicate” or “Extend” de­pending on your viewing option

*NOTE: different operating sys­tems may differ

Step 6:

1. Right click on computer
desktop and select “Screen
Resolution”

2. Display Properties window
will pop up

3. If a secondary monitor is
grayed out, click on it and se­lect “Extend these displays”
in the “Multiple Displays” drop
down

4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x720

10

Connecting to Composite Video

Step 1:

Connect the 3.5mm Composite AV
Cable to the back of the P300 Neo.

Step 2:

Connect the composite end of
the AV Cable (Red, White,Yellow)
to your device.

11

Connecting to Composite Video Cont.

Step 3:

In the Main Menu

Select “INPUT” icon Select “RCA”

Step 4:

Turn on your multimedia device.

Connectivity with multimedia devices

The P300 Neo can connect to many media devices including: iPod, iPhone, iPad,
VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game
consoles and other peripherals with ease.

*Some smartphones require video out capabilities to be displayed with the P300 Neo. Check
with your phone manufacturer.

12