Aanalog and digital systems L310b, L310w, L210b, L210w User Manual

analog and digital systems
L210b L210w L310b L310w
owner's manual
table of contents
introduction 1
introduction
Thank you for purchasing an a/d/s/ L series mini-speaker system. The L210 and L310 are the latest descendants of the original ADS mini-speaker which first introduced the concept of big sound from a small box. The L210 and L310 produce superior sound with classic a/d/s/ drivers and advanced crossover technology. The sonic realism, bass response, and output capabilities are remarkable for such compact loudspeakers. The L210 and L310 are magnetically shielded and are supplied with mounting brackets.
This edition of a/d/s/ mini-speakers features new cast aluminum housings that are weather resistant, allowing the L210 and the L310 to be permanently mounted outdoors. In addition, the L210 and L310 drivers are magnetically shielded so that they may be used indoors near television screens or computer monitors. The L series mini-speaker systems will not only provide excellent performance when used alone, but may also be combined with an a/d/s/ powered subwoofer to provide stunning full range high output Audio/Video system performance. Clearly the L210 and L310 are two of the most versatile speakers available. Any type of system, ranging from outdoor applications, to home theater systems, to multimedia computers can take advantage of their exceptional performance.
Installing the L210 or L310 is not difficult. However, correct wiring and proper placement play a vital role in optimizing sound quality. This manual provides information on the placement, connection and operation of your loudspeakers. Please read it thoroughly and save it for future reference.
speaker placement
Where speakers are placed significantly affects their sound. Some general placement guidelines are given below. However, since all situations are different you should experiment with various locations to determine where they sound best.
Outdoor use
Although the L210 and L310 are “all weather” loudspeakers, when using them outdoors you will extend their life and improve reliability if you avoid mounting them where they will be exposed to direct sunlight for extended periods of time. The L210 and L310 will stand up to moderate amounts of moisture. However, they should not be mounted will be directly exposed to heavy rain. In colder climates, bringing your loudspeakers inside for the winter when they are not being used is advised.
Boundaries
In general, the L210 and L310 will produce the smoothest response and best stereo image when located at least two feet from the room boundaries - that is, the floor, ceiling and walls. Moving the speaker closer to one or more boundaries will increase the bass output. In some rooms, the extra bass will enhance the sound. In others the extra bass will be too much, making the sound “boomy” or “tubby”. Experimenting with speaker placement is the most important thing you can do to achieve the best possible sound. “Hard” surfaces near a speaker can affect the distribution of high frequency sound in the room. As a result, the accuracy of the stereo image. If the speakers are near the corners, point the speakers towards the center of the room. If the floor in front of the speakers is not carpeted, place a small area rug in front of the speaker to reduce high frequency reflections and improve the stereo image. When a speaker is on a shelf or tabletop, keep the front of the speaker flush with the edge of the supporting surface if possible.
1
Height
Try to place the speakers so they are close to the same height as your ears when you are seated in the preferred listening area. Also be sure the speakers are high enough that the sound they produce will not be constrained by
Separation
Start at your preferred listening position with the speakers at the points of an equilateral triangle, aimed toward the listening position. (See diagram.) Experiment with moving the speakers closer together and varying the aiming angle until you get the stereo image you prefer.
Speaker orientation
Stereo imaging is generally best when a speaker’s long axis is vertical, but horizontal placement is by no means ruled out. Try the speakers both ways to determine if the difference in sound is important to you.
Any of the a/d/s/ mini-speakers can be placed on a shelf or other solid surface. If the speakers are placed on a shelf, put the supplied adhesive-backed felt pads on the bottom of the cabinets. The pads protect the surface under the speakers and reduce the possibility of rattles or buzzes. The L210 and L310 may also be used freestanding.
mounting the speakers
Before mounting the speakers in brackets, plan the mounting location and method very carefully. Follow the speaker placement guidelines described in the instruction manual and decide on the mounting locations. If you plan to hide the speaker wires behind the mounting surface, route the wires before you mount the brackets. See the following section for information on wiring.
2
At
least
2
feet
Approximate
height of
seated
listener's ear
Loading...
+ 5 hidden pages