AAEON Technology UPS Edge User Manual
UPS Edge
UPS Edge Gateway System Series
User’s Manual ed 1
UPS-NANO
Copyright Notice
This document is copyrighted, 2019. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However,
the original manufacturer assumes no responsibility for its use, or for any infringements
upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.
Preface II
UPS-NANO
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
®
Microsoft Windows
®
Intel
, Pentium®, Celeron®, and Xeon® are registered trademarks of Intel
Corporation
Atom™ is a trademark of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.
is a registered trademark of Microsoft Corp.
Preface III
UPS-NANO
Item
Quantity
Packing List
Before setting up your product, please make sure the following items have been
shipped:
xUPS-EDxx-xxxxx-xx01 (X=0~9, A~Z, General P/N) 1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
Preface IV
UPS-NANO
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.
Preface V
UPS-NANO
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any power supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls.
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure
to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and contain all electronic components
in any static-shielded containers.
Preface VI
UPS-NANO
17. If any of the following situations arises, please the contact our service
personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.
Preface VII
UPS-NANO
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received including interference that
may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions and your local government’s
recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et
les directives gouvernementales de recyclage.
AAEON FCC ID: OHBUWSKIT1
Preface VIII
UPS-NANO
部件名称
有毒有害物质或元素
铅
(Pb) 汞 (Hg) 镉 (Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○ ○ ○ ○ ○ ○
外部信号
连接器及线材
○ ○ ○ ○ ○ ○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
Preface IX
UPS-NANO
Hexavalent
(Cr(VI))
Polybrominated
(PBB)
Polybrominated
(PBDE)
Wires &
Connections
O：The quantity of poisonous or hazardous substances or elements found in each of the
normal usage only
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Poisonous or Hazardous Substances or Elements
Component
PCB & Other
Components
Connectors
for External
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under
Lead
Mercury
(Pb)
O O O O ○
O
O O O O O O
(Hg)
Cadmium
(Cd)
Chromium
Biphenyls
Diphenyl Ethers
Preface X
UPS-NANO
Table of Content
Chapter 1 - Product Specifications .............................................................................................. 1
1.1 Product Features ............................................................................................................... 2
1.3 Specifications ............................................................................................................... 2
Chapter 2 – Hardware Information .............................................................................................6
2.1 System Dimensions ................................................................................................... 7
2.2 I/O Location................................................................................................................. 8
2.3 List of Systems Connectors ..................................................................................... 8
2.4 Motherboard Information ...................................................................................... 10
2.5 List of Jumpers and Connectors........................................................................... 12
Chapter 3 - Drivers Installation ................................................................................................. 26
3.1 Driver Download and Installation ....................................................................... 27
3.2 LoRa® stack setup and test (only for LoRa version running Linux) .......... 28
Preface XI
UPS-NANO
Chapter 1
Chapter 1 - Product Specifications
Chapter 1 – Product Specifications
UPS-NANO
System
Form Factor
CPU
CPU Frequency
I/O Chipset
1.1 Product Features
Intel® Apollo Lake SoC N33350, N4200 and E3900 Series (E3930, E3940, E3950)
Onboard LPDDR4 Memory up to 8GB, eMMC Storage up to 64GB
Gigabyte LAN x 2, HDMI x 1, DP x 1
USB 2.0 x 1, USB 3.0 x 3, USB 3.0 OTG x 1
WiFi 802.11ac, 1x1, Bluetooth 4.2® (via M.2 2230) [Intel AC9260] (optional)
4G LTE cat. 4 (via MiniPCIe) Global [Quectel EG25-Gl] (optional)
AI Core Movidius Myriad X mPCIe card x 1 (optional)
1.2 Product Applications
UPS IoT Edge is an Industrial IoT Gateway able to cover several applications within
different markets. Its ability to offer multiple radio interfaces makes possible the
communication with industrial wireless sensors, such as Bluetooth, WiFi and AI devices.
The gateway can host classic Operating systems and 3rd party application software
aimed to complete the coverage of end user application.
1.3 Specifications
Chapter 1 – Product Specifications 2
105 x 100 x 69,4mm (L x W x H)
Intel® Apollo Lake SoC up to ATOM x7-
E3950
up to 2.0GHz (x7-E3950)
Processor integrated
UPS-NANO
Memory Type
BIOS
SPI BIOS － 128Mb Flash
Power Requirement
Power Supply Type
Power Consumption
(Typical)
Dimensions (L x W)
Operating Temperature
Operation Humidity
Certification
Others
Display
VGA/LCD Controller
Output and resolution
Onboard Single/Dual Channel LPDDR4
memory, up to 8GB
5V DC Only @6A
DC-In
MAX 25W
105 x 100 x 69,4mm (L x W x H)
Without power adaptor 0°C ~ 45°C (32°F ~
113°F)
With power adaptor 0°C ~ 40°C (32°F ~
104°F)
10 ~ 80% relative humidity, non-condensing
CE/FCC Class A, RoHS complaint Microsoft
Chapter 1 – Product Specifications 3
Azure certified
Movidius Myriad X VPU integrated
Intel® HD Graphics 50x up to 605MHz
HDMI 1.4b x1 4K @ 30 hz
DP 1.2 4K @ 60 hz
UPS-NANO
I/O
Ethernet
Audio
USB
Antenna
Power input
Onboard eMMC
Expansion Slot
Connectivity
4G LTE cat. 4 (via Quectel EG-25G)
802.11 ac, 2.4/5GHz
Realtek RTL8111G-CG x 2
HDMI I2S x 1
DP x 1
USB 3.0 OTG x 1
USB 3.0 x 3
USB 2.0 x 1
Antenna x 4
Power button x 1
DC Power x 1
up to 64 GB
Mini Card (Full-size) (auto switch with mSATA)
M.2 2230
4G
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/
B19/B20/B25/B26/B28; LTE TDD: B38/B39/B40/B41
UMTS: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8
WiFi
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE
802.11n, IEEE 802.11acSupport of WPA/WPA2
Supports 20/40MHz at 2.4GHz and 20/40/80MHz
at 5GHz
Chapter 1 – Product Specifications 4
Loading...