AAEON Technology RTC-1010AL User Manual

Last Updated: May 16, 2018
Rugged Tablet Computer

User ’s Manual 1stEd

Copyright Notice

No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.
Preface II

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.
Cortex is the registered trademark of ARM Holdings
Android is the trademark of Google Inc.
All other product names or trademarks are properties of their respective owners.
Preface III

Packing List

Before setting up your product, please make sure the following items have been shipped:
Item Quantity
RTC-1010AL with Windows 10 1
AC/DC power adapter 1
Product DVD with drivers 1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
Preface IV

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.
Preface V

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure
to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and contain all electronic components
in any static-shielded containers.
Preface VI
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.
Preface VII

FCC Statement

This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received including interference that may
cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte. Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et les directives gouvernementales de recyclage.
Preface VIII

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量
AAEON Panel PC/ Workstation
有毒有害物质或元素
部件名称
(Pb)汞(Hg)镉(Cd)
六价铬
(Cr(VI))
多溴联苯
印刷电路板
及其电子组件
外部信号
连接器及线材
外壳
中央处理器
与内存
硬盘
液晶模块
光驱
触控模块
电源
O:表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
(PBB)
多溴二苯醚
(PBDE)
X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注: 一、此产品所标示之环保使用期限,系指在一般正常使用状况下。 二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。
Preface IX

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products
AAEON Panel PC/ Workstation
Poisonous or Hazardous Substances or Elements
Component
PCB & Other Components
Wires & Connectors for External Connections
Chassis
Lead
Mercury
(Pb)
O O O O O
O O O O O O
O O O O O O
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated Diphenyl Ethers
(PBDE)
CPU & RAM
Hard Disk
LCD O O O O O O
Optical Drive O O O O O O
Touchscreen
PSU
OThe quantity of poisonous or hazardous substances or elements found in each of the component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal usage only
O O O O O O
O O O O O O
O O O O O O
O O O O O O
Preface X

Table of Contents

Chapter 1 - Product Specifications.............................................................................................. 1
1.1 Specifications............................................................................................................ 2
Chapter 2 – Getting Started ........................................................................................................ 6
2.1 Product Overview.....................................................................................................7
2.2 Notes before use.................................................................................................... 12
2.3 Turning On the Device...........................................................................................13
2.4 Touch Controls ........................................................................................................14
Chapter 3 – Setting Up................................................................................................................ 15
3.1 Settings Screen ....................................................................................................... 16
3.1.1 System.......................................................................................................... 19
3.1.2 Device......................................................................................................... 22
3.1.3 Network & Internet.................................................................................. 23
3.1.4 Personalization Settings.......................................................................... 25
3.1.5 Accounts Settings ..................................................................................... 26
3.1.6 Time & Language Settings ..................................................................... 27
3.1.7 Ease of Access Settings ........................................................................... 28
3.1.8 Privacy Settings ......................................................................................... 29
3.1.9 Update & Security.................................................................................... 30
Chapter 4 – Optional Accessories............................................................................................. 31
4.1 Barcode Scanner ................................................................................................... 32
4.2 Install Camera Metro UI....................................................................................... 33
Appendix A - Statements........................................................................................................... 37
Preface XI
Product Specifications

1.1 Specifications

System
Processor
System Memory
LCD Display
Communication
I/O Port
Intel® Celeron®N3350 Dual Core 1.1 GHz
Processor
(2M Cache, up to 2.4GHz)
(opt.)Intel® Pentium® N4200 Quad core
1.1GHz Processor
(2M Cache up to 2.5GHz)
(opt.) Intel® Corei7-6600U Processor
(4M Cache, up to 3.40 GHz)
On Board DDR3L 4GB
HD (800x 1280) 800nits LCD with 5-point P-cap
Anti-Scratch Screen
Wi-Fi 802.11b/g/n
Bluetooth 4.1 (EDR)
Two USB 2.0 x 2 (Type-A)
One USB 3.0 x 1(Type-A)
and BLE Support
One 3.5mm 4 pole Audio jack for MIC and
Line-out
One DC-In Jack (DC 19V)
One RJ-45 jack for 10/100/1000 LAN
One DB-9 (RS-232/RS-422/RS-485)
(RS-422/RS-485 max. baud rate: 9600 bps for
long distance)
One Micro HDMI port
Chapter 1 – Product Specifications 2
One docking connector
Storage 64 GB eMMC
(opt) 64GB~256GB mSATA
Navigation GPS/ Glonass/ AGPS (when 3G is enabled)
E-Compass
Camera 2MP Front Camera, 8MP Rear Camera with
Flash
Sensor Built-in Light Sensor
Built-in G-Sensor
Built-in 3-axis Digital Gyroscope
OS Window 10 IoT
Mechanical
Color
Dimension (W x H x D)
Gross Weight
Carton Dimension
Chapter 1 – Product Specifications 3
Black & Dark Grey
282.6 x 190 x 29.9mm(11.12 x 7.48 x 1.17”)
1.25Kg (2.75lb)
46 x 44 x 29cm (18.11 x 17.32 x 11.41”)
5pcs about 10 kg
Air Transport: 1 layer – 4 boxes, 4 layers – 16
boxes about 160kg
Ocean Shipment: 1 layer – 4 boxes, 5 layers – 20
boxes about 200kg
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Water/ Dust Protection
Rating
Vibration
Drop
ESD
EMI/ Safety
-20°C ~ 50°C (-4 ~ 122°F)
-55°C ~ 70°C (-67 ~ 158°F)
10 ~ 95%
IP65
Met MIL-STD-810G-514.6 Procedure I Cat.24, Fig
514.6E-1 & 514.6E-2 (Unit is non-operating)
ASTM 4169-99 Truck Assurance Level II,
Schedule E (Unit is non-operating)
26 drops from 122 cm height to 2“ plywood over
concrete with bumpers & unit off
2 units to pass
MIL-STD-810G-516.6, Procedure IV
Air +/- 8KV, Contact +/- 4KV
CE/ FCC Class B/ UL
Power Supply
AC/DC Adapter
Battery
Chapter 1 – Product Specifications 4
AC Power Input: 100 ~ 240 V, 50 ~ 60 Hz, 36W
Output : 12V
1 Lithium-Polymer High Capacity Battery
swappable; 14.8V 2200mAh 33Wh
LCD
Display Type
Max. Resolution
Luminance (cd/m2)
Viewing Angle
TFT LCD Module with LED Backlight
800 x 1280
300 nit
1000 nit (opt.)
Horizontal: 178°
Vertical: 178°
Chapter 1 – Product Specifications 5

Getting Started

2.1

Product Overview

Front View
Chapter 2 – Getting Started 7
Loading...
+ 40 hidden pages