AAEON ACP-5212 User Manual
Multi-Touch Panel PC ACP-5212
ACP-5212
21.5” Fanless Multi-Touch Panel PC
®
Intel
AtomTM D510 Processor
Anti-Scratch Surface
ACP-5212 Manual 1
March 2011
st
Ed
Multi-Touch Panel PC ACP-5212
Copyright Notice
This document is copyrighted, 2011. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON, assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i
Multi-Touch Panel PC ACP-5212
Acknowledgments
z Intel
z Microsoft
®
, AtomTM are registered trademarks of Intel® Corporation.
®
Windows is a registered trademark of Microsoft®
Corporation.
z RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
z C&T is a trademark of Chips and Technologies, Inc.
z UMC is a trademark of United Microelectronics Corporation.
z ITE is a trademark of Integrated Technology Express, Inc.
All other product names or trademarks are properties of their
respective owners.
ii
Multi-Touch Panel PC ACP-5212
Packing List
Before you begin installing your Medical Station, please make
sure that the following items have been shipped:
1 ACP-5212 Infotainment Multi-Touch Panel PC
4 HDD screws
4 VESA screws
5 Anti-drop kits
1 Product DVD
Contains User’s Manual (in PDF format), Drivers and
Utilities
If any of these items are missing or damaged, you should cont act y our
distributor or sales representative immediately.
iii
Multi-Touch Panel PC ACP-5212
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later ref erence.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cl oth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
iv
Multi-Touch Panel PC ACP-5212
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMENT
16. External equipment intended for connection to signal
input/output or other connectors, shall comply with relevant
UL / IEC standard (e.g. UL 1950 for IT equipment and
UL 60601-1 / IEC 60601 series for systems – shall comply with
the standard IEC 60601-1-1, Safety requirements for medical
electrical systems. Equipment not complying with
UL 60601-1 shall be kept outside the patient environment, as
defined in the standard.
.
Caution:
It may cause the danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type
recommended by the manufacturer.
v
Multi-Touch Panel PC ACP-5212
Classification
1. Degree of production against electric shock: not classified
2. Degree of protection against the ingress of water: IPX0
3. Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
4. Mode of operation: Continuous
5. Type of protection against electric shock: Class I equipment
vi
Multi-Touch Panel PC ACP-5212
FCC
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received
including interference that may cause
undesired operation.
vii
Multi-Touch Panel PC ACP-5212
UL Module Description
ACP-5212 AC modules are developed to
suitable for the Classification Mark
requirement
viii
Multi-Touch Panel PC ACP-5212
Safety Symbol Description
The following safety symbols are the further explanations for your
reference.
Medical equipment with respect to electric
shock, fire and mechanical hazards only in
accordance with UL 60601-1, and
CAN/CSA C22.2 NO. 601.1
Attention, consult ACCOMPANYING
DOCUMENTS.
Ground wire
ound wire. Protective Gr
Medical equipment with respect to electric
shock, fire and mechanical hazards only in
accordance with UL 60601-1, and
CAN/CSA C22.2 NO. 601.1
ix
Multi-Touch Panel PC ACP-5212
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Panel PC/ Workstation
有毒有害物质或元素
部件名称
印刷电路板
及其电子组件
外部信号
连接器及线材
外壳 × ○ ○ ○ ○ ○
中央处理器
与内存
硬盘 × ○ ○ ○ ○ ○
液晶模块 × ○ ○ ○ ○ ○
光驱 × ○ ○ ○ ○ ○
触控模块 × ○ ○ ○ ○ ○
电源 × ○ ○ ○ ○ ○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。
铅
(Pb)汞 (Hg)镉 (Cd)
× ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
x
Multi-Touch Panel PC ACP-5212
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Features.................................................................... 1-3
1.3 Specification.............................................................. 1-4
1.4 Dimension .................................................................1-7
Chapter 2 Hardware Installation
2.1 Safety Precautions.................................................... 2-2
2.2 A Quick Tour of the ACP-5212.................................. 2-3
2.3 2.5” Hard Disk Drive (HDD) Installation ....................2-5
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization . .................................3-2
3.2 AMI BIOS Setup........................................................ 3-3
Chapter 4 Driver Installation
4.1 Installation................................................................. 4-3
Appendix A Programming the Watchdog Timer
A.1 Programming .........................................................A-2
A.2 W83627DHG Watchdog Timer Initial Program......A-7
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
st
B.2 1
Memory Address Map.......................................B-4
xi
Multi-Touch Panel PC ACP-5212
B.3 IRQ Mapping Chart ..............................................B-5
B.4 DMA Channel Assignments...................................B-5
Appendix C Miscellanea
C.1 General Cleaning Tips.......................................... C-2
C.2 Cleaning Tools...................................................... C-3
C.3 Scrap Computer Recycling ................................. C-5
C.4 Installing Accessories........................................... C-6
xii
Multi-Touch Panel PC ACP-5212
Information
Chapter
1
General
Chapter 1 General Information 1-1
Multi-Touch Panel PC ACP-5212
1.1 Introduction
The ACP-5212 is a Multi-Touch Infotainment Panel PC with
superior onboard Intel
®
AtomTM D510 processor-based computer. It
is a PC-based system with 21.5” true color TFT LCD display,
integrated multimedia functions make them the perfect platforms to
build comprehensive lifestyle computing applications.
The ACP-5212 includes all the features of a powerful computer into
a slim and attractive chassis. The ACP-5212 has 250 nits TFT
display with 1366 x 768 resolution. This model equips two-point
Multi-Touch Window design and is easy to clean. Moreover, it is
IP-65 front bezel and IPx1 back chassis that can be installed in
harsh environments. In addition, the ACP-5212 deploys 7H
hardness Anti-Scratch Surface to avoid accidentally damage.
The ACP-5212 supports one 2.5” Hard Disk Drive and one internal
Compactflash™ slot for the storage functions, and two Mini-Card
expansions. Moreover, it supports smart card reader, RFID, MSR,
Skype phone, and camera for fulfilling the demands of versatile
applications.
Chapter 1 General Information 1-2
Multi-Touch Panel PC ACP-5212
1.2 Features
z 21.5” WXGA (1366 x 768) Fanless TFT LCD Display
z Superior Onboard Intel
z Easy-To-Clean: Multi-Touch Window Design (Two-Point)
z IP-65 Front Bezel And IPx1 Back Chassis
z Anti-Scratch Surface (7H Hardness)
z Smart Card Reader/ RFID/ MSR/ Skype Phone/ Camera
®
Dual Core Atom D510 Processor
Support (Optional)
Chapter 1 General Information 1-3
Multi-Touch Panel PC ACP-5212
1.3 Specification
System
z Processor Onboard Intel
®
Atom™ D510 1.66 GHz
Processor
z System Memory DDR2 SODIMM x 1, Max. 2 GB
z LCD / CRT Controller Integrated in Processor
z Ethernet 10/100/1000Base-TX, RJ-45 x 2
z I/O Port USB2.0 x 6 (2 on side; 4 on bottom)
RS-232 x 1
RS-232/422/485 x 1
Line-out x 1
VGA x 1
z Storage Disk Drive CompactFlash™ slot x 1 (Internal)
2.5” SATA Hard Disk Drive x 1
z Expansion Mini Card x 2
z OS Support Windows® XP (T/S: Single point), Linux
Fedora (T/S: Single point) Windows®7
(T/S: Multi-point)
Mechanical
z Construction IP-65/ NEMA4 for plastic front bezel,
IPX1 for plastic chassis
z Mounting VESA 75/100
z Dimension 21.5”(W) x 13.7”(H) x 2.34”(D) (546mm x
Chapter 1 General Information 1-4
Multi-Touch Panel PC ACP-5212
348mm x 59.4mm)
z Carton Dimension 26” x 19.52” x 7.87 (661mm x 496mm x
200mm)
z Net Weight 18.3 lb (8.3 kg)
z Gross Weight 14.57 lb (6.61 kg)
Environmental
z Operating Temperature 32
z Storage Temperature -4
z Operating Humidity 10%~95%@ 40
z Vibration 1 g rms/ 5-500Hz/ Random Operation
z Shock 15 G peak acceleration (11 msec.
z EMC CE/FCC Class A
o
F~104oF (0oC~40oC) (No Airflow)
o
F~140oF (-20oC~60oC)
o
C, non-condensing
(HDD)
duration)
Power Supply
z DC Input 70W DC 12V, w/AC power adapter w/lock
LCD
z Display Type 21.5” TFT-LCD, CCFL
z Max. Resolution 1366 x 768
z Max. Colors 16.7 M colors (6/8-bit for R, G, B)
z Luminance (cd/m
z Viewing Angle 170º (H), 160º (V)
Chapter 1 General Information 1-5
2
) 250 cd/m2
Multi-Touch Panel PC ACP-5212
z Backlight CCFL
z Backlight MTBF (Hours) 50,000
Touchscreen
z Type Projected Capacitive Multi-Touch
(Windows® 7)
z Light Transmission 90%
Chapter 1 General Information 1-6
Loading...