Assembly Instructions
Step 1
1
2
3
4
3
5
6
7
8
9
10
11
Parts List for each stand
1. M6 16 Flat head screws 4 (1 for spare)
2. Top plate 1
3. Insulating pads 2
4. Column 1
5. Base 1
6. Matching spring washers 7 (1 for spare)
7. M6 16 socket cap screws 7 (1 for spare)
8. Metal feet with washers 4
9. Protective discs 4
10. 5mm Allen key 1(for socket cap screws)
11. 4mm Allen key 1 (for flat head screws)
Lay column and base on floor.
Align bottom section of column, Insulating pad and base, and secure the three
parts together with 3 socket cap screws
and washers(Use Allen key provided).
Caution: base is heavy.
Step 2
Feed wire through column.
For optimum sonic performance, you may
now fill the column with play sand
(optional).
Step 3
Step 5
Attatch insulating pad and top plate on to
column by aligning screw holes on each
part,secured by three flat head screws.
Step4
Place speaker on stand .
Align the 3 outside inserts on bottom of
speaker with the 3 holes on top plate,
secure with 3 socket cap screws/washers.
Step 6
Install the 4 metal threaded feet with
washers into threaded holes on inside
of base.
If you have hard wood floor and do not want
any damage from metal feet ,use the protective discs underneath each metal foot.
S-3 ,S-3C speaker can also be mounted
on stand by using the same method.
Loading...