A4Tech G9-730FX User Manual

2.4G RF MOUSE

User Guide

MODEL: G9-730FX

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Federal Communications Commission Requirements

The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

●Reorient of relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help.

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).

- 2 -

About “Screen Capture Tool”

Bundles with value-added functions, such as Screen capture, TutorPen, Keyboard/Mouse Simulation,

16-in-One, 4-way Wheel, etc. Best software for your every needs.

Define the Mouse Buttons

1.Click the icon at the system tray to open the “Main Menu”.

2.Select the function you preferred for each button from the pull-down function list.

3.Store and apply the setting by clicking "Apply".

4.Click “Exit”.

5.Set “Function/Key Reminder” by clicking at the system tray.

- 3 -

Set 5 functions in ONE button

You can define 5 functions in mouse button, such as Screen capture, TutorPen, Keyboard/Mouse Simulation, 16-in-One, 4-way Wheel, etc.

How to shift / apply 5 functions

1)Press/hold the left button and click the right button to shift 5 chosen functions. and the function info will pop up (as below figure)

2)Press mouse button to perform the chosen functions.

-4 -

Capture Screen

How to set:

Select "Screen Capture" from the function list of the button.

Usage:

1)Press/hold the mouse button and drag the mouse cursor to the opposite corner and form a box around your object.

Edit Tool

2)Click on “Edit Tool” and paste (Ctrl+V) it to any document or during online chatting. after editing your screenshot (Video capture is only supported on Vista or above)

-5 -

Use the Wireless Mouse for your Presentation

1.TutorPen

Press/hold the defined button to draw a line to remark the objects on your screen. You can eliminate the lines by double or triple click on the defined button.

You may set the line width in the "TutorPen Setting".

- 6 -