A4Tech G7630D User Manual

2.4G RF MOUSE
User Guide

MODEL: G7-630D

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.

Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment of f and on, the u ser is encouraged to try to correct
the interference by one or more of the following measures:

●Reorient of relocate the receiving antenna.

●Increase the separation between the equipment and receiv er.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits se t forth for un controlled equipment and meet s the F CC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65. The equipment has very low levels of RF energy that it
is deemed to comply without testing of specific absorption ratio (SAR).

- 2 -

About “Screen Capture Tool”

Bundles with value-added functions, such as Screen capture, TutorPen, Keyboard/Mouse Simulation,
16-in-One, 4-way Wheel, etc. Best software for your every needs.

Define the Mouse Buttons

1. Click the icon at the system
tray to open the “Main Menu”.

2. Select the function you preferred
for each button from the pull-down
function list.

3. Store and apply the setting by
clicking "Apply".

4. Click “Exit”.

5. Set “Function/Key Reminder” by
clicking

at the system tray.

- 3 -

Set 5 functions in ONE button

You can define 5 functions in mouse button
Simulation, 16-in-One, 4-way Wheel, etc.

How to shift / apply 5 functions

1) Press/hold the left button and click the right button to shift 5 chosen functions. and the function info
will pop up (as below figure)

2) Press mouse button

to perform the chosen functions.

, such as Screen capture, TutorPen, Keyboard/Mouse

- 4 -

Capture Screen

How to set

Select "Screen Capture" from the function list of the button .

Usage

1) Press/hold the mouse button

2) Click

:

:

and drag the mouse cursor to the opposite corner and form a box

around your object.

Edit Tool

on “Edit Tool” and paste (Ctrl+V) it to any document or during online chatting. after editing

your screenshot (Video capture is only supported on Vista or above)

- 5 -

Use the Wireless Mouse for your Presentation

1. TutorPen

Press/hold the defined button to draw a line to remark the objects on your screen. You can eliminate
the lines by double or triple click on the defined button.
You may set the line width in the "TutorPen Setting".

- 6 -