A4Tech G671MD24G User Manual

G6 Saver

Notebook Wireless Optical Mouse

User’s Guide

Model: G6-71MD

www.a4tech.com

Knowing the mouse

2.4GHz wireless technology with 16 channels and 1,048,576 ID codes

The 2.4GHz RF wireless technology is fine-tuned with 16 selected channels

and exclusive 1,048,576 ID codes; it offers precise and reliable wireless

operation in the busy wireless environments. It allows many wireless

devices to operate simultaneously in one area without interfering in the

wireless working range up to 8-10 meters.

Anti-interference with auto channel hopping technology

"Auto Channel Hopping" technology automatically detects and secures

available channels in the busy public 2.4GHz universal band. It ensures

better quality of wireless communication.

Specifications

RF Data Transmit Rate

ID Codes

2Mbps

1,048,576 sets

Frequency

Channels

Errorless 2-way communication technology

Errorless 2-way communication technology features error

correction capability that speeds up data transmission and

increases wireless precision. It saves valuable battery power

and cost.

Ultra low battery power consumption - only 8mA!

2.4G6 is designed with “4 Level Auto Power Saving” modes

with ultra low battery power consumption; it only requires 8mA

of electric current to operate.

2.402GHz～2.480GHz

16 channels

- 1 -

Hardware Installation

Step 1: Inserting the Batteries

A. Press the tab on the battery cover

locates on the mouse as shown here

and removes the cover.

B. Insert the supplied batteries, making sure that the

positive (+) and negative (-) ends of the battery match

the polarity indicators inside the battery housing.

Step 2: Connect the Receiver

For notebook computer:

A. Insert the USB receiver into the USB port of your notebook computer.

For PC computer:

A. Insert the USB receiver into the USB port on desktop computer or via USB HUB.

B. Your computer will automatically recognizes your USB receiver.

C. Slide the batter cover back into its

position until it “clicks” firmly into place.

C. Press the “connect” button on the USB receiver as shown, the

Green Power LED will light up, and starts “Blinking”.

D. Press the connect button on the bottom of the mouse. >> Now,

you should be able to use the mouse.

- 2 -