Page 1
Thanks for purchasing a 9.Solutions product. With great passion, we
design our products to be as versatile as possible. We hope that our
products contribute to your creative vision.
Sincerely,
The 9.Solutions Team
SPECIFICATIONS:
Weight: 480g
Color: Grey
Connection Possibilities:
Top plate
(1x) 10x36mm elongated slot
(12x) 3/8” (10mm) through holes (each 10mm top plate
hole is spaced with 1 inch centers)
(10x) 1/4”-20 tapped holes
Each corner block
Three side 3/8”-16 tapped holes and
(1x) underside 3/8”-16 tapped hole
Included: (3x) 3/8”-16 multi-placement rod clamps
CHEESE PLATE
To insure best stability of the plate,
always try to spread the mounting points
(e.g. suction cups) at a good distance
from the center of the plate.
Depending of the weight that has to be mounted on the plate,
use 3/8” or 5/8” standard rods, at a minimum, on all three
sides of the plate for best stability.
The rod clamp finger screws
can be used for mounting
3/8”-16 tapped ball heads.
Visit www.9.solutions for more info.Always follow the safety standards and regulations of the given country where the product is being used.
Loading...