BLUE bean
Data sheet
BLUE bean is a high performance and ultra low power
surface mount USB radio combining single-stream
11ac Wave2 Wi-Fi and Bluetooth® 5.0 in a very small form factor
BLUE bean is IEEE 802.11b/g/n/a/ac Wave2
dual-band wireless LAN and Bluetooth 5.0 USB
module optimised for small size and low power
consumption.
It is based on Qualcomm QCA9377-7 chipset. Has an
integrated dual-band (2.4 and 5 GHz) 1x1 802.11ac
Wave2 WiFi (supporting MU-MIMO) and Bluetooth®
5.0 transceivers and combined in to very small form
factor (17 x 12 mm with RF connector and 24 x
12mm with integrated antenna).
The radio module supports advanced power saving
techniques. Bluetooth supports both Class1 and
Class2 transmissions and advanced coexistence
mechanisms allow it to work seamlessly with Wi-Fi
ensuring good quality and high performance.
BLUE bean software drivers are available for Linux,
Windows 10 and Android operating systems.
Quick specs
• 802.11a/b/g/n/ac, 2.4 and 5 GHz, 1x1 SISO,
433 Mbps data rate, up to 20 dBm output power
• 20/40/80 MHz channel size support
• STBC, MU-MIMO, transmit beam-forming
• Bluetooth v5.0, BLE, ANT+ and backwards compatibility
with BT v1.x and BT v2.x + enhanced data rate
• Connectorized (Murata HSC type connector: MM4829-
2702RB0) or an integrated dual-band antenna version
• Linux, Windows and Android drivers available
• Based on QCA9377-7 chipset
• Industrial temperature range -40 to +85 C°
• Very small form factor (17 by 12 mm without antenna
or 24 by 12 mm with antenna)
• Surface mount, dual-side design
• Available interfaces - Bluetooth USB 1.1,
WLAN USB 2.0
BLUE bean Data sheet v1.4-18-10-15
Block diagram
+3.3V
WLAN USB 2.0
BLUETOOTH USB 1.1
QCA9377-7
CHIPSET
BLUE bean
MODULE
Module dimensions (with antenna/ without antenna)
DIPLEXER
WLAN & BT ANT
ANTENNA
2
BLUE bean Data sheet v1.4-18-10-15
Radio characteristics
2.4 GHz
802.11AC
(20 MHz)
2.4 GHz
802.11AC
(40 MHz)
5 GHz
802.11AC
(20 MHz)
5 GHz
802.11AC
(40 MHz)
5 GHz
802.11AC
(80 MHz)
Data rate (Mbps) 7.2 14.4 21.7 28.9 43.3 57.8 65 72.2 86.7
Sensitivity (dBm) -92 -89 -87 -83 -80 -76 -75 -73 -69
Output power (dBm) 18 18 18 18 18 16 16 16 15
Data rate (Mbps) 15 30 45 60 90 120 135 150 180 200
Sensitivity (dBm) -88 -86 -84 -81 -77 -73 -72 -70 -66 -64
Output power (dBm) 17 17 17 17 17 15 15 15 13 13
Data rate (Mbps) 7.2 14.4 21.7 28.9 43.3 57.8 65 72.2 86.7
Sensitivity (dBm) -91 -87 -85 -82 -78 -74 -73 -71 -67
Output power (dBm) 15 15 15 14 14 12 11 10 10
Data rate (Mbps) 15 30 45 60 90 120 135 150 180 200
Sensitivity (dBm) -87 -85 -82 -79 -76 -72 -70 -68 -65 -63
Output power (dBm) 14 14 14 13 13 12 11 9 9 8
Data rate (Mbps) 32.5 65 97.5 130 195 260 292.5 325 390 433.3
Sensitivity (dBm) -84 -81 -78 -76 -72 -68 -67 -65 -61 -59
Output power (dBm) 13 13 13 12 12 11 11 9 9 8
Frequency range 2.402 - 2.480 GHz
Bluetooth
Supported modes BT and BLE
Max TX power 14 dBm (4 dBm BLE)
RX sensitivity (BER >= 0.1%) -95 dBm (-99 dBm BLE)
Power consumption
Wi-Fi mode USB 2.0 mA
Standby (deep sleep)
2G tx99 11b 1Mbps
2G tx99 11n HT20 MCS7
5G tx99 11n HT20 MCS0
5G tx99 11n HT20 MCS7
5G tx99 11ac VHT80 MCS9
0.24
356
326
487
423
421
Bluetooth mode USB 1.1 mA
Continuous Rx burst
Continuous Tx Class 2 (+4 dBm)
Continuous Tx Class 2 (+12.5 dBm)
1.28 sec page scan (non-interlaced)
1.28 sec LE ADV
1.28 sec sni as master
1.28 sec sni as slave
Operating conditions
The module can operate in a wide temperature range and dierent conditions depending on the enclosure. The following
guidelines guarantee that it will work correctly.
22.5
38.5
64.5
0.36
0.23
0.22
0.27
Parameter Units Min Max
Working temperature
Storage temperature
Humidity
Storage humidity
°C -40 85
°C -40 90
%RH 10 90
%RH 5 90
3
BLUE bean Data sheet v1.4-18-10-15
Pinout Information
4