7E Wellness MYOLIFT MINI User guide

TM

MYOLIFT MINI

MYOLIFT TRAINING MANUAL

TM

MINI

tm

©2020 7E Wellness Corporation l All Rights Reserved MyoLift Mini Training

Manual is for Educational and Training purpose only

No portion of this manual may be reproduced or transmitted in any form or by

any means, electronic or mechanical, including photocopying and recording,

without the written permission by an authorized 7E corporate ofcer.

tm

MyoLift Mini Medical Disclaimer:

tm

7E Wellness and the MyoLift Mini microcurrent device are categorized as health

and beauty devices for the enhancement of the overall appearance of the skin.

tm

The MyoLift Mini is NOT a medical device and are not to be represented as such,

in any manner, that may be misconstrued by the public. 7E Wellness does not

tm

endorse the use of the MyoLift Mini for conditions outside the professionals scope

of practice. The information and training provided in this training manual, and any

tm

training classes provided by 7E Wellness and MyoLift Mini are not meant to be

used to diagnose or treat any medical condition and are not liable for any

reactions. For diagnosis or treatment of any medical conditions, clients are

tm

advised to consult a physician. 7E Wellness and MyoLift Mini, its trainers,

employees or any representative of the corporation are not responsible or liable

for any health needs that may require medical supervision and are not liable for

any damage, negative consequences from any treatment, action, application or

tm

preparation, to any person in possession of any of the 7E Wellness and MyoLift

Mini microcurrent device.

tm

Important Information for the User of MyoLift Mini Device:

Contraindication:

tm

The MyoLift Mini microcurrent devices are contraindicated for the following

health conditions:

Electrical implanted devices, such as a pacemaker

Epilepsy; History of Seizures

Active Cancer

Pregnancy

Heart Conditions: Consult with physician

Diabetes: Consult with physician

Recent Facial Surgery

Cochlear (ear) Implants

Always seek the advice of your physician or other qualified health provider

with any questions you may have regarding a medical condition.

Precautions:

tm

The MyoLift Mini should only be used on normal intact skin and stimulation

should not be applied over open wounds, over swollen, infected or inflamed

areas or skin eruptions, or over areas of skin that lack normal sensation.

Potential adverse reactions may include electrode burns, skin irritation/or

redness.

For adult use only. Keep out of reach of children.

Headache and other painful sensations have been reported during or

following electrical stimulation to the head and face. Lowering the intensity

may reduce or eliminate these sensations.

There also may be a perception of flashing lights during the use of your

tm

MyoLift Mini resulting from the stimulation of optic nerve. If you notice this

tm

condition in your client constantly without the use of MyoLift Mini, please ask

them to consult a doctor.

This device is designed to tone facial and neck muscles only. Do not use the

device on any other body parts.

Do not use over the thyroid (front center of the neck area).

TABLE OF CONTENTS

Overview

Introduction to Microcurrent

How does it work?

Indications for use and intended use

Indicators and Controls

tm

Charging MyoLift Mini Device

Applicator Overview

tm

MyoLift Mini Operations

tm

MyoLift Mini Treatment

7e Signature Movements

tm

MyoLift Mini Device Maintenance

Troubleshooting

Standard Instructions

Professional Series

Treatment Steps

7E Conductive Skin Care Products

Erase Mode

Educate Mode

Warranty

01

02

03

04

05

06

07

08

16

17

18

19

20

21

22

23

25

33

48

Overview:

tm

The MyoLift Mini is a FDA cleared, non-invasive, portable facial toning device

intended for professional use. This battery-operated device delivers low-level,

electrical microcurrent impulses to strategic locations on the face to improve

the facial tone for a more youthful appearance. The unique double-tipped

probe applicators, designed for optimal contact with faces of all shapes and

sizes, emits a gentle electrical current which continually alternate between the

tm

positive and negative spheres. The MyoLift Mini device allows you to adjust the

current output from 0 to 400 microamps, as per the client comfort level.

tm

For your MyoLift Mini device to operate properly, the skin needs optimum

moisture content. Therefore, it is important to first spray the RePlenish Conductive

Spritzer onto the skin followed by the 7E Conductive Tx Gel to the areas to be

treated. Following the natural contours of the face, simply maneuver the probes

across the skin prior to beginning the treatment to spread the gel.

tm

Regular use of the MyoLift Mini device will provide your client with increased

facial strength and tone, while maintaining a more vibrant appearance.

1

Introduction to Microcurrent:

Non-invasive facial treatments have grown in popularity over the last 20 years

because of their results and ease-of-use in the day & medical spas. Microcurrent,

for the face, is another example of a procedure which began as a medical

treatment but, has now been adapted for use in the cosmetic marketplace. It is

the only effective aesthetic treatment available for facial toning and long-lasting

results without the aid of a medical device.

tm

The MyoLift Mini skin treatment uses microcurrent technology. The use of

microcurrent treatments, in your skin therapy regimen, will establish visible results.

This gentle, non-aggressive, non-invasive and progressive treatment results in skin

tightening, toning and firming. In fact, the results from microcurrent facial toning

are so dramatic that they are often referred to as “non-surgical face lifts."

With age, the muscles loose ATP (Adenosine Triphosphate) which is the energy of

the skin cells and muscle tissue. The skin starts to fall and expression lines begin to

develop, like the furrow between the eyebrows. On the other hand, the muscles

on our face that are not used often begin to atrophy, which leads to sagging.

Sagging around the jaw lines, chins and neck are some of the examples where

muscle definition is lost as we age. Microcurrent is considered to be an all natural

solution to anti-aging.

2

How Does It Work?

tm

The MyoLift Mini devices uses low-levels of safe, painless electrical impulses

to the muscles in the face and neck. The overly-tightened muscles relax and

under-worked muscles regain their strength. In essence, microcurrent facial

toning re-educates the facial muscles and restores them back almost to their

original shape. When this happens the visible results are quite dramatic and the

face is lifted, firmed and toned back to a much more youthful appearance. At

the same time, the microcurrent improves circulation that stimulates production

of collagen, improves tone and texture, and improves or eliminates fine lines.

tm

MyoLift Mini facial toning is cumulative, which means that the more treatments

the client has, the more improvement they will see in their face and for longer

period of time.

tm

MyoLift Mini for facial lifting, tightening and toning is a great alternative to a

facelift since it is non-invasive, does not require any recovery time, gives instant

results and does not have the same potential for harmful complications as

surgery does.

3

Indications for use and intended use:

tm

The MyoLift Mini device is intended for facial stimulation and is indicated for

over- the-counter cosmetic use.

tm

The MyoLift Mini Device Includes The Following:

MyoLift Mini Device

tm

Lead Wire

Probe Applicators

4oz. Conductive Gel

Battery Charger

User Manual

Quick Start Guide

1-Year Warranty

4

Intensity

Increase/

Decrease

Key

Level 1 Educate Key

Level 2 Educate Key

Level 2 Erase Key

Time Increase/Decrease Key

Run/Pause

Key

Level 1 Erase Key

Turn it On/Off

Status Indicator

Battery Icon

Level 2

Mode

Intensity

Treatment Time Value

Conductivity

Indicator

Level 1

Mode

Indicators and Controls:

5

tm

Charging MyoLift Mini Device:

To charge the device, insert the charger connector pin into the charger socket

on the top of the device.

Note:

Charging is indicated by the battery indicator on the top right corner of

the device.

The battery icon becomes steady when the battery is fully charged.

A fully charged battery will last approximately 30-40 treatments.

If the device does not turn on, plug your device into a wall socket, leaving

it plugged in overnight for a full charge.

Important:

The unit is in-operable during the charging process for safety reasons.

6

Applicator Overview:

The device comes with a set of applicators often referred to as probes. The

double-tipped probes must make direct and constant contact with the skin, as

both the probes together complete the circuit required for the treatment. The

two specially designed probes are manipulated over the surface of the skin in a

precise way to stimulate the different muscles requiring treatment. To enhance

ease of use, each probe has a separate cable, which will be connected to the

output socket.

The conductivity bar on the device's LCD screen will become solid black

confirming that the microcurrent is conducting evenly through the skin.

7

Status Indicator

Battery Icon

Level 2

Mode

Intensity

Treatment Time Value

Conductivity Bar Indicator

Level 1

Mode

Press to start

Insert probes or lead wire

Charging socket

tm

MyoLift Mini Operations:

8

Run Button: Indicates the device is on and ready for use.

Pause Button: Indicates the device is on and may be paused at any time. The

timing will also pause and resume when “Run” is pressed once again.

tm

MyoLift Mini Operation: Run-Pause

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/Decrease

Run/ Pause

Erase Level 1

9

tm

MyoLift Mini Operation: Intensity Button

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/Decrease

Run/ Pause

Erase Level 1

tm

MyoLift Mini Intensity Range is 0 - 400uA.

Level 1 Intensity Range is 0 - 175uA.

Level 2 Intensity Range is 350 - 400uA.

Upward Arrow: Increases the INTENSITY.

Downward Arrow: Decreases the INTENSITY.

10

tm

MyoLift Mini Operation: Time Button

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/Decrease

Run/ Pause

Erase Level 1

Pre-Caliberated Timing 10 - 20 minutes.

Upward Arrow: Increases the TIME.

Downward Arrow: Decreases the TIME.

11

tm

MyoLift Mini Operation: Erase Level 1 Setting

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/DecreaseRun/ Pause

Erase Level 1

Pre-Calibrated to 175 * uA.

For treating: Eye area, Forehead, Lips and Thin Skin.

Preset waveform to help lengthen the muscles.

Erase Level 1 focuses on skin texture and supercial lines.

It relaxes the muscles and helps to work on fascia release for minimizing

tension in the muscles.

Reduces ne lines and wrinkles.

Soften scar tissue and redenes skin texture.

For Treating: Horizontal Lines/Forehead, 11 Lines, Crow’s Feet, Upper Lip,

Lower Lip, Chin, and Fine Lines.

12

tm

MyoLift Mini Operation: Educate Level 1 Setting

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/Decrease

Run/ Pause

Erase Level 1

Pre-Calibrated to *175 uA.

This program shortens the muscles.

Educate Level 1 focuses on toning muscles that are supercial.

Lifts, tightens, and tones the skin and muscles.

For Treating: Neck, Nasolabial Folds, Jowls, Cheeks, Eyebrows.

13

tm

MyoLift Mini Operation: Erase Level 2 Setting

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/Decrease

Run/ Pause

Erase Level 1

Pre-Calibrated to *350 uA. Decrease the intensity if it feels stinging, too

strong or brings visible twitching of the muscles.

This program lengthens the muscles.

Erase Level 2 focuses on skin texture and reduction in the appearance of

wrinkles at various depths.

It relaxes the muscles and works on fascia release for minimizing tension in

the muscles.

For Treating: Horizontal Lines/Forehead, 11 Lines, Crow’s Feet, Upper Lip,

Lower Lip, Chin, and Fine Lines.

14

tm

MyoLift Mini Operation: Educate Level 2 Setting

Intensity Increase/Decrease

Educate Level 1

Educate Level 2

Erase Level 2

Time Increase/Decrease

Run/ Pause

Erase Level 1

Pre-Calibrated to *350 uA. Decrease the intensity if it feels stinging, too

strong or brings visible twitching of the muscles.

This program shortens the muscles.

Educate Level 2 focuses on toning muscles at various depths.

For Treating: Nasolabial Folds, Jowls, Cheeks, Eyebrows and thicker skin.

15

tm

MyoLift Mini Treatment:

Facial muscles create chronic movement in the face and are used minute by

minute. Facial muscles begin losing elasticity due to the overuse of movement

in one direction. Facial muscles need exercise to keep healthy and lifted as much

as the muscles of the body.

tm

Note: MyoLift Mini utilizes double-tipped probe applicators with a flexible handle

designed. True microcurrent is delivered with the pinch-and-hold technique

on the different size muscles by grasping the muscle in-between the probe

applicators.

There is no pain associated with this type of treatment. A slight tingling sensation

may be felt with the initial treatment. Most people report a feeling of relaxation

and an increase in energy following the treatment.

16

7E Signature Movements

During the aging process (35 years and up) the muscles go through

noticeable changes.

Re-educating the muscle to its original location is achieved by understanding

tm

the origin and insertion of the muscles and applying the MyoLift Mini

signature movement techniques.

Visible muscle changes with aging includes: loose, droopy, soft muscles and

loss of rmness.

The muscle and fascia may become tight and create the formation of ne

lines that will eventually turn into wrinkles.

Therefore, it is understood that in-order to re-establish the muscles integrity,

shape and lifted appearance, one must understand if the muscles need to be

lengthened or shortened and the direction of the movement.

LENGTHENING (Erase Setting) - Muscles that need to be relaxed need to be

lengthened. This is generally applied for the thinner skin tissue such as around

the eyes, lips and forehead areas. The movement is executed by starting on

the forehead area, with the probes together and pull apart in the MyoLift

tm

Mini signature Pinch and Hold.

SHORTENING (Educate Setting) - The shortening of the muscle tightens the

Golgi Tendon and allows for a tightening effect to the loose skin or facial

muscles that have become elongated. The movement is executed by

nd

placing one probe stationary and the 2 probe moving towards the

stationary probe

17

tm

MyoLift Mini Device Maintenance:

Make sure the device is disconnected from the wall socket and the probe

applicators are disconnected from the device

Remove all foreign matter from device and probes with wet paper towel.

With gloves on, spray state approved disinfectant onto wet paper towel and

wipe down the device and probes thoroughly.

With a second paper towel, wet with water only, wipe down the device and

probes thoroughly.

Allow a few minutes to air dry.

Disinfecting Protocol:

Storing the Device and Probes

Store the probes in a closed container or bag.

Warning

Keep wires loosely wound, as to not cause breakage.

DO NOT IMMERSE probes into disinfectant solution.

18

Troubleshooting:

Observation

Device not turning on

The probe applicator

wire is short

Conductivity bar is

flashing

Remedy

Apply more gel

Possible Causes

The wires are not

separated

Poor contact with skin

or insufficient gel

application

Device is plugged into

a power socket

Battery is not charged

Probe applicators are

not inserted into the

output socket

Unplug the device

from the power socket

and then turn it on

Charge the battery for

4-5 hours

Make sure that the

handheld probe

applicators are

completely inserted

into the output socket

Separate the wire by

gently pulling the two

wires apart to work

freely on the face

Start the device by

pressing the Run/Start

button

Press Run/Pause button

The Round start button

is not pressed

Start the device using

the push down round

button

19

Standard Instructions:

Follow these treatment steps for the best results:

Get acquainted with microcurrent and its effects.

Review the contraindications and precautions listed in this manual.

A longer hold of the probe applicators is needed around challenging areas.

Repeat multiple passings to deliver more microcurrent energy around

challenging areas for better results.

Rule of thumb: To deliver the maximum true microcurrent to the area, the

pinch and hold movement is used with the skin in-between the two double-

tipped probe applicators. Hold for three to five seconds to get the best

results.

tm

Prepare the skin prior to MyoLift Mini treatment with the 7E RePlenish

Spritzer and the 7E Conductive Tx Gel.

tm

Use all cleansing and exfoliation techniques prior to using MyoLift Mini.

20

Professional Series:

tm

7E MyoLift treatment may be repeated weekly until the desired results

are achieved. Maintenance 1x every 6-8 weeks is suggested, if 3 months

have passed since last treatment, series will need to be restarted.

The following are general and approximate guidelines for frequency of

treatment

20-35 years old: Preventative, can be done once every month

35-40 years old: Initial series of 3-6, once per week, Maintenance

every 6-8 weeks

45-50 years old: Initial series of 6-8, once per week, Maintenance

every 6-8 weeks

50-60 years old: Initial series of 10-12, once to twice per week,

Maintenance every 4-6 weeks

60 plus years old: Initial series of 15-18, ideally twice per week,

Maintenance every 4 weeks

21

Treatment Steps:

Cleanse the face and pat dry.

Before beginning the treatment, spray the skin with 7E RePlenish Conductive

Spritzer. Apply a water-based serum on cleansed face.

Apply 7E Conductive Tx Gel on the skin of the face and neck. Reapply to the

selected facial area(s)being treated.

tm

Turn the 7E MyoLift Mini device ON and press Run/Pause button. The

conductivity bar will start flashing.

Start with the Erase program based on the area of treatment. Increase/

decrease the intensity accordingly.

Move probe applicators over the area with gel.

Repeat each step for a total of three times.

Once done, wipe any excess product from the skin with a warm towel.

Apply 7E RePlenish Spritzer to rehydrate the skin before applying the

appropriate moisturizer.

Preparation of Skin

22

7E Conductive Skin Care Products:

A collection of 7E Conductive Tx Gels and 7E RePlenish Spritzer are treatment

products with multiple purposes:

delivers microcurrent energy into the skin by providing optimum conductivity

and ample slippage for movements,

serves as a treatment for the skin, as it improves the skin's overall internal

health, by boosting the skin's ATP and muscles tightening.

The 7E Wellness Conductive Tx Gels and 7E RePlenish Spritzer are a water-based

formula formulated as an active mineral-based to maintain a wide-range of

conductivity. The treatment products are infused with essential additives such as

minerals, vitamins, peptide proteins, sea kelp and natural ingredients to deliver the

current and to target the health and nourishment of the skin.

ReNu Conductive Tx Gel

For symptoms associated with stressed and

irritation of the skin. This gel is infused with natural

soothing ingredients designed to calm and

destress skin conditions, due to intrinsic health

issues and extrinsic environmental conditions such

as sensitive, reactive, rosacea & eczema/psoriasis.

Symptoms such as irritation, redness, acne

breakout, excessive dryness, chapped and flaky

skin or any combination are relieved.

23

ReStore Conductive Tx Gel

For symptoms associated with sun-damaged and

anti-aging and the onset of the chronological aging

process. The skin is nourished, hydrated, muscles are

tightened, and self-healing of the skin's tissue takes

place for a healthy glow.

ReSolve Conductive Tx Gel

For oily/acneic skin conditions and focuses on

eliminating the impurities of the skin. This gel will drive

microcurrent energy into the skin for clarification and

self-healing of antibacterial properties, de-congesting

& decreasing pore size. The infused essential properties

of the following essential ingredients will leave the skin

detoxified, purified and feeling clean.

RePlenish Humectant Spritzer

A hyaluronic acid-based spritzer used prior to any

electrical current treatment to ensure high levels of

moisture content.

24

The frontalis works with assistance from the occipitalis to raise the eyebrows or

draw scalp forward. Better known as expression lines, the movement leading to

an expression stimulates the forehead muscles but results increase that hampers

the smooth blood vessels flow. Microcurrent exercises these muscles leading to

smoothing out the expression lines and to relax the muscle of the forehead.

Forehead:

Place the stationary probe applicator just outside the hairline at the top of

the forehead.

Place the moving probe applicator just over the eyebrow and pull the probe

up towards the stationary probe at the top of the forehead.

Stop when the two probe applicators are close together but not touching.

Hold for 3–5 seconds and repeat.

Move across the forehead performing this move until the entire forehead

has been treated and repeat.

Note: At times, one probe will be stationary and the second probe will make the

movement. The stationary probe does not move and is noted by a red dot of the

Reference Guide Chart.

Erase Mode:

Top of the Face

25

1

175 microamps

Program

Level

IntensityRepetition

Erase

3x

Note: Dots = Stationary Probe

26

Glabella Area (11 Lines):

Place the two probe applicators together between the eyebrows (do not

touch probe applicators together).

Draw the two probe applicators up and out towards each eyebrow using

light pressure and stretching apart any lines.

Hold for 3–5 seconds and repeat.

1

175 microamps

(adjust as needed)

Program

Level

IntensityRepetition

3x

Erase

27

Place the two probe applicators together on the outside of the eye.

Draw the top probe applicator up towards the eyebrow (leaving the bottom

probe applicator stationary) using light pressure and stretch apart any lines.

Hold for 3–5 seconds, and repeat.

Perform the move on the other side of the face and repeat so each side is

treated twice 3x.

Crow's Feet Eraser:

1

Program

Level

IntensityRepetition

3x

Note: Dots = Stationary Probe

Erase

175 microamps

(adjust as needed)

28

Upper Lip:

Place the two probe applicators together on the center of the upper lip.

Simultaneously, slide the probe applicators outward toward the corners

of the mouth using light pressure and stretch probes apart.

Hold for 3–5 seconds.

1

Program

Level

IntensityRepetition

3x

Erase

175 microamps

(adjust as needed)

29

Place the stationary probe applicator in the middle of the chin, place the

moving probe applicator next to the stationary and drawing it away moving

to the edge of the mouth.

When you reach the edge of the mouth, hold movement for 3–5 seconds.

Move to a lower position on the chin and repeat the move.

Repeat movement at least 3x over the entire depressor.

Depressor (Chin):

Program

Level

IntensityRepetition

Note: Dots = Stationary Probe

13x

Erase

175 microamps

(adjust as needed)

30

Mentalis:

Place both probe applicators in the middle of the chin and pull the probes

away from each other – one towards the lip and the other towards the

jawline. Hold movement for 3–5 seconds.

Move the probe applicators to a position closer to the end of the mouth and

repeat the move.

Repeat movement at least 3x over the entire mentalis.

Program

Level

IntensityRepetition

Erase

2

350-400 microamps

3x

Note: Dots = Stationary Probe

31

Stretch:

Place both probe applicators together on the jaw line just at the edge of

the mouth.

Hold the lower probe applicator stationary while pulling the top probe

applicator up firmly to where it is level with the middle of the mouth.

Hold for 3–5 seconds and repeat.

Continue this move on the other side of the chin and repeat so each side is

treated 3x.

Program

Level

IntensityRepetition

2

350-400 microamps

3x

Erase

Note: Dots = Stationary Probe

32

Educate Mode:

Muscles of the Lower Face

The Muscles such as the orbicularis oris, depressor anguli oris, depressor labi

inferiois and mentalis will be addressed in the lower areas of the face.

Neck:

Cleanse the face and pat dry.

Before beginning the treatment, spray the skin with 7E RePlenish Conductive

Spritzer. Apply a water-based serum on cleansed face.

Apply the 7E Conductive Tx Gel on the selected facial area(s) being

treated.

tm

Turn the 7E MyoLift Mini device ON and press Run/Pause button. The

conductivity bar will start flashing.

Place the stationary probe just under the ear lobe where the jaw line and

ear meet (one end of the sternocleidomastoid muscle).

Place the moving probe at the clavicle and slide it slowly towards the jaw

line. Work up the neck until you get to the center of neck making sure to

avoid working over the trachea area.

When you reach the jawline hold the movement for 3–5 seconds. Program

Level Intensity to Educate 175 microamps 3x.

33

1

175 microamps

Program

Level

IntensityRepetition

Educate

3x

Note: Dots = Stationary Probe

Jawline:

Apply the 7e Conductive Tx Gel on the area being treated before using the

tm

7E MyoLift Mini device.

Place the stationary probe just under the ear lobe where the jawline and

ear meet (one end of the Sternocleidomastoid muscle)

Place the moving probe at the clavicle and slide it slowly towards the jawline.

34

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Work up the neck until you get to the center of neck making sure to avoid

working over the trachea area.

When you reach the jawline hold the movement for 3–5 seconds. Program

Level Intensity should be Educate1 at 175 microamps 3x.

Repeat each movement at least 3x on each side of the face.

Note: Dots = Stationary Probe

35

Middle of the face:

The muscles in the middle portion of the face lead to expressions more voluntary

than the upper portion. When it comes to middle of the face, muscles like the

masseter, buccinator, temporalis are at work, including the zygomatic major and

minor. These muscles assist the face in chewing food, smile and whistle as well

as retraction and elevation of the mandible or jawbone. The zygomatic major is

the facial muscle for expressions and elevating the mouth when a person smiles,

while the zygomatic minor is for healthy appearance of the face. To remove the

sagging in the middle of the face, Microcurrent treatment is needed to contract,

tightening up any slackness in the cheek area.

Place the stationary probe applicator on the back of the cheek muscle and

place the moving probe applicator at an angle inside of the nasolabial fold

using firm pressure sliding towards the stationary probe applicator.

When you reach the stationary probe applicator, hold movement for 3–5

seconds (do not let probe applicators touch).

Continue at an angle up towards nose following the nasolabial fold.

Repeat movement at least 3x on each side of the face.

Nasolabial Folds (Marionette Lines):

36

2

350-400 microamps

Program

Level

IntensityRepetition

Educate

3x

Note: Dots = Stationary Probe

37

Snarl 1:

Place the first probe applicator on the center portion of the top lip (using no

pressure). Place the second probe applicator just off the corner of the mouth.

Push the second probe applicator up towards the first, getting under

the muscle at the corner of the mouth and lifting to produce a “snarl.” Hold

for 3–5 seconds and repeat.

Continue this move on the other side of the mouth and repeat so each side

is treated twice.

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

38

Snarl 2:

Place the first probe applicator next to the nostril (using no pressure).

Place the second probe applicator just off the corner of the mouth.

Push the second probe applicator up towards the first getting under the

muscle at the corner of the mouth and lifting to produce a “snarl.” Hold for 3–5

seconds and repeat.

Continue this move on the other side of the mouth and repeat so each side

is treated twice.

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

39

Masseter Area (Hollow of Cheeks):

Place the stationary probe applicator just below the cheek bone and place

the moving probe applicator at the jawline sliding it towards the stationary

probe applicators.

When the moving probe applicator reaches the stationary probe applicator,

hold movement for 3–5 seconds (do not let probe applicators touch).

Work vertically from side of mouth to ear area.

Repeat movement at least 3x on each side of the face.

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

40

Place the stationary probe applicator next to the nostrils (using no pressure).

Push the moving probe applicator up from the jawline with firm pressure.

Stop when you have the cheek muscle “pinched” between the two probe

applicators and hold for 3–5 seconds. Repeat.

Continue out towards the ear performing each move twice.

Perform this move on the other side of the face and repeat so each side is

treated twice.

Cheek Sculptor:

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

41

Apple of Cheeks:

Place the stationary probe applicator under the eye making sure you are

on the bone and not in the eye socket.

Push the moving probe applicator up from the middle of the cheek with

firm pressure.

Stop when you have the cheek “pinched” between the two probe

applicator and hold for 3–5 seconds then repeat.

Continue out towards the edge of the eye performing each move twice.

Continue this move on the other side of the face and repeat so each side

is treated twice.

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

42

Hairline:

Place the stationary probe applicator just inside the hairline above the ear.

Place the moving probe just outside the hairline above the ear.

Gently pinch the two probe applicator together, hold for 3–5 seconds, and

repeat.

Continue up towards the arch of the eyebrow performing each move twice.

Perform the move on the other side of the face and repeat so each side

is treated twice.

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

43

Eyebrow Lift:

Place the stationary probe applicator on the forehead above the eyebrow.

Place the second probe applicator under the eyebrow and lift up firmly so the

brow is arched.

Continue the move down the eyebrow, holding for 3–5 seconds & repeating.

Perform the move on the other side of the face and repeat so each side is

treated thrice.

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

44

Place the stationary probe applicator at the end of the eyebrow closest to

the nose.

Start the moving probe applicator at the outside of the eye and gently sweep

over the eyebrow (straddling the eyebrow) towards the first probe. Stop when

the probe applicators are close, but not touching.

Hold for 3–5 seconds, and repeat.

Perform the move on the other side of the face and repeat so each side is

treated twice.

Eyes Upper:

Program

Level

IntensityRepetition

Educate

2

350-400 microamps

3x

Note: Dots = Stationary Probe

45

Eyes:

The area around the eyes is surrounded by numerous fine, narrow muscles that

support the skin which is particularly fragile. The lines can be caused by sunglasses,

tm

eyeglasses, migraines and sleeping on stomach. The MyoLift Mini Microcurrent

device stimulates the muscles around the eye to improve the circulation in the

peripheral blood vessels. The enhanced blood circulation leads to decrease in

sagging skin and rejuvenation of the skin.

46

1

0-175 microamps

Program

Level

IntensityRepetition

Educate

3x

Note: Dots = Stationary Probe

47

Place the stationary probe applicator under the eye and next to the nose.

Start the moving probe applicator at the outside of the eye and gently sweep

the probe applicator in towards the first probe applicator. Stop when the

probe applicators are close but not touching.

Hold for 3–5 seconds, and repeat.

Perform the move on the other side of the face and repeat so each side

is treated twice.

Under Eye:

Warranty:

Warranty Coverage

Warranty Disclaimers

tm

Each new MyoLift Mini device (exclusive of batteries) is warranted to be free

from defects in materials and workmanship for a period of one year. Note: When

you register your device online, you will get an additional one year free warranty.

This warranty ceases if the product has been damaged accidentally, in shipment,

unreasonable use, misuse, neglect, improper service, commercial use, repair by

unauthorized personnel or reasons beyond defect in materials or workmanship.

This warranty does not extend to any units which are used in violation furnished by

manufacturer, or to units which have been altered or modified, and to damage to

products or parts which have the serial number removed, altered or defaced or

rendered illegible.

During the above one (or two) year warranty period, a product with a defect will

be repaired or replaced with a reconditioned comparable unit at distributor's

option when the product is returned to the distributor. The repaired or replace-

ment product will be in warranty for the balance of the one (or two) year warranty

period and an additional one-month period. No charge will be made for such

repair or replacement.

This warranty is in lieu of all warranties expressed or implied and no representative

or person is authorized to assume for manufacturer or anyone liable in connection

with the sale of our products. There shall be no claims for defects or failure of

performance or product failure/any theory of tort, contract or commercial law

This product warranty extends to the original consumer/purchaser of the product.

48

including, but not limited in negligence, gross negligence, and strict liability,

breach of warranty and breach of contract. Some states do not allow the

exclusion or limitation of implied warranties or consequential damages, so the

above limitations may not be applicable to certain demographics. Manufacturer

is not responsible or liable for indirect special or consequential damages arising out

of or in connection with the use/performance of the product or other damage

with respect to loss of property or loss revenues or profit.

Customer Service

For in-warranty service for a product covered under the warranty period, no

charge is made for service. Please contact 7E Wellness customer service to

request an RMA return form. No returns will be accepted without an RMA. Have

the product insured, packed with sufficient protection, postage and prepaid to

the address provided on the RMA. Customer's duty/brokerage fee, if any, must be

paid by the consumer.

Out Of Warranty Service

There will be charges rendered for repairs made to the product after the expiration

of the two year warranty period., after purchaser is advised appropriately. The

distributor cannot assume responsibility for loss or damage during shipment. It is

recommended to carefully pack the defected product before shipment and

insure it with the carrier. Ensure that you return the unit and/or accessories and also

indicate complete address. C.O.D. shipments cannot be accepted.

49

Version 01.20