70mai MIDRIVED02 User Manual

70Mai Smart Dash Cam Pro

Product overview

Indicator light

Function
button

Speakers

USB interface

Memory card slot

use of non-standard car chargers and USB cables.

The default file format of the memory card may not
be compatible with the format supported by this
product. When inserting a memory card for the first
time, format it in the dash cam before use.

Please use a good quality memory card purchased
through official channels. Poor quality memory cards
may have problems such as the nominal read/write
speed does not match the actual read/write speed,
and the nominal capacity does not match the actual
capacity. 70mai is not responsible for lost or
damaged video footage caused by the use of a poor
quality memory card.

If the battery is deformed, swelling, or leaking, stop
using the product immediately and contact customer
service.

Keep this product away from strong magnetic fields,
which may cause damage to the product.

Do not use this product at temperatures above 60℃
or below -10℃.

Please use this product to the extent permitted by law.

Keep the product at least 20cm away from the driver
and passengers.

Power
button

Camera

Thank you for choosing the 70mai
Smart Dash Cam Pro

The 70mai Smart Dash Cam Pro is equipped with
professional video recording chip and image
sensor for capturing high-quality videos.

How to use

Scan the QR code below for instructions. Before
using this product, please read the instructions
carefully to avoid loss due to improper usage.

The specific functions and contents of this
product may be adjusted due to various business
reasons. We cannot guarantee the timely update
of related packaging and instructions. Please
refer to the functions and contents of the product
during actual use.

FCC

Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20cm between the radiator & your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.

Activating 70mai Smart Dash Cam Pro

The 70mai Smart Dash Cam Pro must be
activated using the 70mai app. Please search
"70mai" in the app store or scan the QR code
below to download and install the 70mai app.

Please select "Add Device" in the 70mai app and
complete the activation according to the prompts.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.

Important notices

Please read all precautions and instructions carefully
before using this product to ensure proper and safe
usage.

This product is a vehicle accessory that records
external video footage. The usage of this product
does not guarantee the safe driving of users. We are
not responsible for driving accidents and other
losses that result from product failure, loss of data,
or the operation of this product.

Certain functions of this product may not work
properly due to differences in vehicle conditions,
driving style, and driving environment. Power
disconnection, usage outside of normal temperature
and humidity, impact, and memory card damage
may cause this product to malfunction. We do not
guarantee normal operation under all circumstanc­es.
Please install this product properly and do not block
the driver's line of sight or the vehicle airbag to
avoid product failure and personal injury.
Please use the car charger and USB cable that
comes with this device to avoid compatibility issues.
70mai is not responsible for any loss caused by the

Specifications

Image sensor: SONY IMX335
Resolution: 2592×1944
Camera: FOV 140°, F1.8, 6 glass
Wireless connection: Wi-Fi IEEE

802.11 b/g/n/ 2.4GHz
G-sensor: Acceleration sensor
Expandable memory: MicroSD card with
capacity of 16-64GB and read/write speed of
Class10 and above
Supported OS: Android4.4/iOS8.0 and above
Power supply: car cigarette lighter
Battery type: li-polymer battery
Battery capacity: 500mAh
Input: 5V 2A

Operating temperature: -10℃ ~ 60℃

Dimensions: 87.5 × 53 × 18mm

Box contents

1. 70mai Smart Dash Cam Pro × 1

2. Car charger × 1

3. USB cable × 1

4. Electrostatic sticker × 2

5. Wiring tool × 1

6. Heat resistant adhesive × 1

7. Mounting bracket × 1

8. Manual × 1

Service: [e-mail]
For further information, please go to
www.70mai.com

70mai Smart Dash Cam Pro

Please read this manual carefully before
using the product and keep it in a safe place.