3sixt 3S-0332, 3S-0331, 3S-0330, 3S-0333 User Manual

0 (0)
3sixt 3S-0332, 3S-0331, 3S-0330, 3S-0333 User Manual

QUICK START GUIDE

TREK Personal Bluetooth Speaker

1

Fully charge TREK for at least 2 hours through a

 

wall outlet before first use (see step ).

 

2

To recharge TREK

 

d

 

Insert the supplied USB 2.0 cable (micro USB

 

 

end a ) into TREK’s 5V input port b . Insert USB

 

 

end of cable c

into the USB 2.0 port of your

 

 

wall adaptor, laptop or PC

d .

 

 

 

 

 

d

 

 

 

c

 

 

 

f

 

 

 

 

 

a

 

 

 

 

 

e

3

 

 

 

h

Pairing TREK for the first time with your device

g

 

Enable your device’s (eg. smartphone or tablet) Bluetooth.

 

Hold down the Power Button f for 4 seconds to turn

 

 

TREK on. TREK will automatically try to find your device.

 

 

The LED e will flash blue and TREK should then appear

 

 

in your device’s paired devices list. ‘Pair’ your device with

 

 

TREK. TREK will then make another tone to confirm the

 

 

pairing and the LED will stay blue to denote a connection.

 

 

You are now free to play music & audio through TREK.

 

 

Adjust the volume of TREK through your device’s volume

 

 

settings or the

or buttons g on TREK (long press).

 

 

For every pairing after your first, you only need to turn

 

 

on your device’s Bluetooth, turn on TREK by holding

 

 

down the Power Button e

for 4 seconds and wait for

 

 

the ‘pairing successful’ tone. To operate speakerphone

b

 

function, press

h to pick up or hang up an incoming call.

 

Important Safety Information

PLEASE READ BEFORE OPERATION

1.Before recharging TREK through a wall outlet make sure wall outlet voltage is 5V.

2.Make sure to use a standard USB 2.0 Charge & Sync Cable with the appropriate specifications - other

cables may damage your smartphone, tablet or TREK.

3.Do not drop, knock, dissasemble or attempt to repair TREK.

4.Do not immerse or put TREK in water and keep TREK in a dry place.

5.Do not expose TREK to excessive heat including sunlight and fire.

6.Do not use TREK near explosive gases or flammable materials.

7.Do not burn or incinerate TREK.

8.Do not expose TREK to harsh chemicals.

9.Turning TREK’s volume up to the max shortens the life of TREK. It also may damage your hearing.

10.Putting anything in TREK’s input or output ports, other than a standard USB 2.0 charge & sync cable will cause damage or short out TREK.

11.When encountering any fault during operation, please cut off the power supply and disconnect the USB cable to prevent further damage to the speaker or other components.

12.The Bluetooth transmission range or connectivity could be affected by low battery power. In that case, recharge immediately.

For more information visit www.3sixtgear.com/support

3S-0330/0331/0332/0333

Loading...