![](/html/68/68f3/68f3c6f74fdc7b3ce19ef18273363c75c1eabc673cbedeb758ef52df325f0670/bg1.png)
Product Na me : Wire less blue tooth headphone
FCC ID: 2ASKA- LM3081900
IC: 247 81-L M3081900
Model: 26-308190 0
Brand: Elecpioneer
Specification :
solution :JL
transmission distance :10 m
playing time:4h
stand-by time:300 h
battery: 80mAh
charging time;2h
trumpet: Ø14mm
sensitivity :110± 3dB S.P. L at 1 KHZ
impedance :32 Ω
frequency range :2402 MH~2480 MHz
Output Power: 0 .5943mW
Charging a.
Before the first use of the battery must be full of to u se again
1-The charger wire connected to the hea dphone jack.
2. The charging indicator shows a red light , when fully cha rged
the red light, blue light to show is full cha rge state .
Tur n ON/OF F
1 .Boot : press a nd hold multifunction button f or about 6
seconds , the blue light brig ht 1 bluetooth headset Ib op en at tills
time. 2. Turn off : press and hold multifunction button for about 5
seconds , the red light of light 1 second , and a voice prompt
"shutdown ", the bluetooth headset that enter the shutdown
state.
Paired with mobile phones , connection
1 .Open the bluetooth h sad set in red and blue lights flashing,
bluetooth headset has entered the matching state at this time. 2.0pen
the mobile phone bluetooth and search for bluetooth devices. 3. Found
In mobile search list has to search the bluetooth headset, click on the
matching, and a voice prompt "connected '. 4. If you don't successful
pairing, repeated operation matching a can.
Answer , hang up and reject four. And redial
1. Incoming calls : telephone, short press the multifunction button one
time. 2. Hang up: dial the phone or on the phone, the short press the
multifunction button onetime. 3. Hie decline a call: when call, long
press the multifunction button for2 seconds to loosen, 4. Redial :
according to the multifunction button twice quickly, redial finally set
aside a cellphone
Number five . To the tel egraph
1. Call, bluetooth «ar opportunity for mobile phono number , sucti as
13800000000.
Volume,Next /Pre track ,Play music
1.Volume:Press volume up/down key on your phone to
increase/decrease volume
2.Next track,prese and hold the volume + or 2s,Pre track ,prese and hold
the volume- or 2s
3.Play music:short press the multifunction button,can activate the
phone music player, short press the multifuntion button to play/pause.
Industry Canada statement:
This device complies with ISED’s licence -exempt RSSs . Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference , and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux
appareils radio exempts de licence. L’ exploitation est autorisée aux
deux conditions suivantes : (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage
reçu, y compris un brouillage susceptible de provoquer un
fonctionnement ind ésirable.
Radiation Exposure Statement :
The product comply with the Canada portable RF exposure limi t set
forth for an uncontrolled environment and are safe for intended
operation as described in this manual.
The further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to lower
output power if such function is available .
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils
portables RF pour les Etats-Unis et le Canada établies pour un
environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce
manuel. La réduction aux expositions RF peut être augment ée si
l'appareil peut être conserv é aussi loin que possible du corps de
l'utilisateur ou que le dispositif est ré glé sur la puissance de sortie la
plus faible si une telle fonction est disponible .
Federal Communication Commission Interference
Statement
This device complies with Part 15 of the FCC Rules . Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference , and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device , pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not . installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diff erent from that
to which the receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.
FCC Caution : Any changes or modifications not expressly approved
by the party responsible for compliance could void the user' s authority
to operate this equipment .
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure l imit set forth
for an uncontrolled environment and are safe for intended operation as
described in this manual . The further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is
available.