3onedata IES618-2F-4D(RS-232)-P, IES618-4DI(RS-485)-P, IES618-2F-4DI(RS-485)-P, IES618-4F-4DI(RS-485)-P, IES618-4F-4D(RS-232)-P User Manual

IES618-4D series

Industrial Ethernet switch

User manual

Shenzhen 3onedata Technology Co., Ltd.

Tel: [phone] Fax: [phone]

www.3onedata.com

【

Summarize】

IES618-4D series is a industrial, management, redundant
industrial Ethernet switch and integrate 4 po rt serial devi ce server.
It included

1. IES618-4D(RS-232)-P(12/48VDC),
Support 8 port 10/100Base T(X) and 4 port RS-232,

2. IES618-4DI(RS-485)-P(12/48VDC),
Support 8 port 10/100BaseT(X) and 4 port RS-485/422,

3. IES618-4F-4DI(RS-485)-P(12/48VDC),
Support1-4 port is 10/100BaseT(X) Ethernet, 5-8 port is
100BaseFX fiber port and 4 port RS-485/RS-422,

4. IES618-2F-4D(RS-232)-P(12/48VDC),
Support1-6 port is 10/100BaseT(X) Ethernet, 7-8 port is
100BaseFX fiber port and 4 port RS-232,

5. IES618-4F-4D(RS-232)-P(12/48VDC),
Support1-4 port is 10/100BaseT(X) Ethernet, 5-8 port is
100BaseFX fiber port and 4 port RS-232,

6. IES618-2F-4DI(RS-485)-P(12/48VDC).
Support1-6 port is 10/100BaseT(X) Ethernet, 7-8 port is
100BaseFX fiber port and 4 port RS-485/422,
it adopted SW-Ring redundant technology (Recovery time<20ms),
users can set the redundant easily to increase network reliabili ty,
furthermore. It adopted no fan, low power consumption design,
IP40, corrugate high strength iron shell, the performance is more
steadily. It accorded with CE, FCC standard and Industrial 4 class,
DIN rail installation and wide operating temperature (-40~75℃),
it can satisfied some kinds of industrial environment, it can
provide reliable and quickly solution for your Ethernet device

【

Packing list】

Please check the packaging and accessories by your first using.

Industrial Ethernet switch(IES618-4D series)ⅹ 1
User manual ⅹ 1
CD ⅹ 1
Certificate of quality ⅹ 1

Warranty card ⅹ 1

Please inform us or our distributor if your equipment’s have
been damaged or lost any accessories, we will try our best to
satisfy you.

【

Features】

IEEE802.3, IEEE802.3u, IEEE 802.3x, IEEE802.1Q,

IEEE802.1p, IEEE802.1D, IEEE802.1W

Support SW-RingTM redundant network patent technology

(Faulty recovery time<20ms)

Support IEEE802.1Q VLAN configuration,

Control broadcast storm effectively

Support 802.1p _QOS
Support RSTP
Support SNMP
Support IGMP snooping, static multicast filter, port trunking

and port mirroring

Support port bandwidth limited function, optimize

bandwidth utilize

Support 4 port RS-232/ RS-485/ RS-422 serial device server
Support based on socket application access
Support Sever, Client, UDP based mode and Sever, UDP

advanced mode

Support Windows serial driver procedure mode
Support TCP, UDP, ARP, ICMP and DHCP protocol
Support cross-gateway and cross-router communication
Specific serial self-adapt function (Realcom)
Support Web, CLI, Telnet management
Support 2K MAC address table
Support 2 power supply input and 1 relay alarm output
Support port line and redundant network faulty/unusual,

local and remote alarm

High strength iron shell, IP40 protection
Industrial 4 class design
Redundant 24VDC power supply input(12～48VDC)

-40~75℃ working temperature
DIN-rail, wall mounting installation

【

Panel Layout】

IES618-4D series

Back view Top and below view

IES618-4D（RS-232）-P(12/48VDC)

1. PWR1/PWR2 power supply

2. Ground screw

3. Relay output terminal block
4 Console port

5. DIP switch (4 bits)

6. DIN-Rail

7. RS-232 port

8. 10/100Base-TX RJ45 port

9. LED indicator
Front view

IES618-4DI

（

RS-485）-P(12/48VDC)

1. PWR1/PWR2 power supply

2. Ground screw

3. Relay output terminal block
4 Console port

5. DIP switch (4 bits)

6. DIN-Rail

7. RS-485.422 port

8. 10/100Base-TX RJ45 port

9. LED indicator

Front view

IES618-2F-4D

（

RS-232）-P(12/48VDC)

1. PWR1/PWR2 power supply

2. Ground screw

3. Relay output terminal block
4 Console port

5. DIP switch (4 bits)

6. DIN-Rail

7. RS-232 port

8. 10/100Base-TX RJ45 port

9. 100Base-FX fiber port

10. LED indicator

Front view

IES618-4F-4DI（RS-485）-P(12/48VDC)

1. PWR1/PWR2 power supply

2. Ground screw

3. Relay output terminal block
4 Console port

5. DIP switch (4 bits)

6. DIN-Rail

7. RS-485/422 port

8. 10/100Base-TX RJ45 port

9. 100Base-FX fiber port

10. LED indicator Front view

IES618-2F-4DI

（

RS-485）-P(12/48VDC)

1. PWR1/PWR2 power supply

2. Ground screw

3. Relay output terminal block
4 Console port

5. DIP switch (4 bits)

6. DIN-Rail

7. RS-232 port

8. 10/100Base-TX RJ45 port

9. 100Base-FX fiber port

10.

LED indicator Front view

IES618-4F-4D(RS-232)-P(12/48VDC)

1. PWR1/PWR2 power supply

2. Ground screw

3. Relay output terminal block
4 Console port

5. DIP switch (4 bits)

6. DIN-Rail

7. RS-485/422 port

8. 10/100Base-TX RJ45 port

9. 100Base-FX fiber port

10. LED indicator
Front view

【

Appearance and dimension】

Unit(mm)

Front view Back view

【

Power supply input】

Vertical view Top view

IES618-4D series provide 4 bits industry terminal block (V1-,
V1+, V2-, V2+）), V-, V+ is 12～48VDC power supply input.

IES618-4D series DC power supply input supported
redundancy function, provided PWR1 and PWR2 power input,
can use for single, and can connect 2 separately power sup ply
system, use 1 pair terminal block connect the devi ce at the same
time. If one of the power system broke, the device can work
un-interruptible. built-in over current protection, Reverse
connection protection

【

Console port】

IES618-4D series provided 1pcs procedure test port based in
serial port. It adopts RJ45 interface, located in top panel, can
configure the CLI command through R J45 to DB9 female cable.

【

Relay connection

】

Vertical view Top view

The relay owns two contacts of the terminal block on the top
panel of IES618-4D series. It is used to detect both power failure
and port failure. The two wires attached to contacts form an open
circuit when:

(1) IES618-4D series has lost power supply from one of the

DC power inputs.

(2) One of the ports is failure.

【

DIP switch】

Top panel provided 4 bits DIP switch to do function
configure（OFF is default factory）,1 and 4 keep for future
function. 3 is recovery default facto ry. 2 is for upgrade. P lease
power off and power on when you change the status of DIP
switch.

【

Communication connector】

10/100BaseT(X) Ethernet port

The pinout of RJ45 port display as below, connect by UTP or STP.
The connect distance is no more than 100m. 100Mbps is used 120
Ωof UTP 5 , 10Mbps is used 120Ωof UTP 3,4,5.

RJ 45 port support automatic MDI/MDI-X operation. can

connect the PC, Server, Converter and HUB .Pin 1,2,3,6

Corresponding connection in MDI. 1→3,2→6,3→1,6→2 are used

as cross wiring in the MDI-X port of Converter and HUB.
10Base-T/100Base-TX are u sed i n M DI/M DI-X, the define of Pin
in the table as below.

NO. MDI signal MDI-X signal
1 TX+ RX+
2 TX- RX­3 RX+ TX+
6 RX- TX­4, 5, 7, 8 — —

Note：“ TX±”Transmit Data± ，“ RX±”Receive Data± ，“ —”Not Use。

MDI (straight-through cable)

1 8

MDI-X (Cross over cable)

MDI/MDI-X auto connection makes IES5028-4GS-2F easy
to use for customers without considering the type of network
cable.

100Base-FX Fiber port

100Base-FX full-duplex SM or MM port, SC/ST type .The fib er
port must be used in pair, TX (transmit) port connect remote
switch’s RX(receive) port; RX(receive) port connect remote
switch’s TX(transmit) port.

The optical fiber connection supports the line to instruct enhance
the reliability of network effectively

.

Suppose: If you make your own cable, we suggest labeling the
two sides of the same line with the same letter (A-to-A and
B-to-B, shown as below, or A1-to-A2 and B1-to-B2).

RS-232 port：

PIN RS-232

1 DCD
2 RxD
3 TxD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 —

DB9 male (RS-232)

RS-485 port:

PIN RS-485

1 D+
2 D­3 /
4 /

5

/

RS-422 port:

PIN RS-422

1 T+

2

T-

3 GND
4 R+

5

R-

RS-485/422

【

LED indicator】

IES618-4D series LED indicator light on the front panel .the
function of each LED is described in the table as below:

System status LED

LED

Indicator Description

PWR1

ON P1 connection regularly
OFF P1 Power supply have no connection or

unwonted

PWR2

ON P2 connection regularly
OFF P2 Power supply have no connection or

unwonted

Alarm

ON

Power, port have alarm

OFF Power, port have no alarm

Run

ON Device unwonted
Blinking Device working steadily, Blinking per

second

Link/Act

ON Established effective

network connection
Blinking Network in activity status
OFF Did not establish effective

network connection

TX

Blinking Transmit data unwonted
OFF Transmit data wonted

RX

Blinking Receive data unwonted
OFF Receive data wonted

【

Installation】

Before installation, confirm that the work environment meet the

installation require, including the power needs and abundant
space. Whether it is close to the connection equipment and other
equipments are prepared or not.

1. Avoid in the sunshine, keep away from the heat fountainhead or
the area where in intense EMI.

2. Examine the cables and plugs that installation requirements.

3. Examine whether the cables be seemly or not (less than 100m)
according to reasonable scheme.

4. Screw, nut, tool provide by yourself.

5. Power: redundant 12-48VDC o power input

6. Environment: working temperature -40～75℃

Relative humidity 5%～95%

DIN rail installation

In order to use in industrial environments expediently, IES618-4D
series adopt 35mm DIN-Rail installation, the installation steps as
fellows:

1. Examine the DIN-Rail attachment

2. Examine DIN Rail whether be firm and the position be

suitability or not.

3. Insert the top of the DIN-Rail into the slot just below the stiff

metal spring.

4. Th e DIN-Rail attachment unit will snap into place as s hown

below.

Wiring Requirements

Cable laying need to meet the following requirements,

1. It is needed to check whether the type, quantity and
specification of cable match t he requirement before cable
laying;

2. It is needed to check the cable is damaged or not, factory
records and quality assurance booklet before cable laying;

3. The required cable specification , quantity, direction and
laying position need to match construction requirements,
and cable length depends on actual position;

4. All the cable cannot have b reak-down and terminal in the
middle;

5. Cables should be straight in the hallways and turning;

6. Cable should be straight in the groove, and cannot beyond
the groove in case of holding back the inlet and outlet holes.
Cables should be banded and fixed when they are out of the
groove;

7. User cable should be separated from the power lines.
Cables, power lines and grounding lines cannot be
overlapped and mixed when they are in the same groove
road. When cable is too long, it cannot hold down other
cable, but structure in the midd le of alignment rack;

8. Pigtail cannot be tied and swerved as less as possible.
Swerving radiu s canno t be too small (small swervi ng causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;

9. It should have corresponding simple signal at both sides
of the cable for maintaining.

【

Specification】

Technology

Standard: IEEE802.3, IEEE802.3u, IEEE 802.3x, IEEE802.1Q,
IEEE802.1p, IEEE802.1D, IEEE802.1W
Protocol: ARP, ICMP, TCP, UDP, DHCP, DNS, HTTP, Telnet,
SW-RingTM

Flow control: IEEE802.3x, back pressure control

Function

Function: SW-RingTM, QOS, 802.1Q VLAN, port-trunking,
static multicast filter, port mirroring, Broadcast storm control,
flow statistics, upgrade online, up and download configuration file,
user name access system.
SW-RingTM: Single, Couple, Chain, Dual homing ring.
Serial device server: 4 port serial device sever, each port
support 4pcs TCP or UDP session connection

Interface

100M Ethernet: 10/100Base-TX self-adapt RJ45 port.
100M fiber port: 100Base-FX (SC/ST/FC)
Console port: Procedure debug (RS-232), RJ45
Alarm port: 2 bit 7.62mm terminal block,
1 channel relay alarm output

Serial

RS-232 signal:TXD,RXD,RTS,CTS,DTR,DSR,GND
RS-422 signal: T+, T-, R+, R-, GND
RS-485 signal: D+, D-, GND
Parity: None,Even,Odd,Space,Mark
Data bit: 5bit,6bit,7bit,8bit
Band rate; 300～115200bps
Direction control: RS485 side adopt ADDC technology,
auto detect and control data transfer direction
Loading: RS-485/422 side support 32 nodes loop back
Protection: 2KV isolation, 15KV static protection.
Connector: RS232: DB9 male, RS485/4225 bit terminal block

Transfer distance

Twisted cable: 100m(CAT5/CAT5e)
Multi mode fiber: 1310nm,2Km
Single mode fiber: 1310nm, 20K, 1310nm, 40Km
1310nm, 60K, 1550nm, 80Km
RS-485/422: 1200m
RS-232: 15m

Exchange attribute:

100M transmit speed: 148810pps
Transfer: Store and forward
System exchange bandwidth: 2.0G
Buffer memory: 1MKbit
Support 2K MAC address table

LED indicator

Power supply indicator: PWR
Alarm indicator: Alarm
System indicator: Run
Ethernet port indicator: Link/Act（1-8）
Serial port indicator: TX(1-4), RX(1-4)

Power supply

Input voltage: 24 VDC(12~48VDC)
Terminal block: 4 bits 7.62mm terminal block
 IES618-4D（RS-232）-P(12/48VDC)
None load consumption: 1.5 W@24VDC
Full load consumption: 3.5 W@24VDC
 IES618-4DI（RS-485）-P(12/48VDC)
None load consumption: 1.8 W@24VDC
Full load consumption: 3.9 W@24VDC
 IES618-4F-4DI（RS-485）-P(12/48VDC)
None load consumption: 4.8W@24VDC
Full load consumption: 6.9W@24VDC
 IES618-2F-4D（RS-232）-P(12/48VDC)
None load consumption: 3.2W@24VDC
Full load consumption: 5.0W@24VDC
 IES618-2F-4DI（RS-485）-P(12/48VDC)
None load consumption: 3.58W@24VDC
Full load consumption: 5.35W@24VDC
 IES618-4F-4D（RS-232）-P(12/48VDC)

None load consumption: 4.75W@24VDC
Full load consumption: 6.14W@24VDC
Support dual redundant power supply

Support inside over-current 4.0A protection
Support opposite connection protection

Mechanical

Shell: IP40, high strength iron shell.
Installation: DIN Rail
Dimension（W×H×D: 160 mm×70mm×130mm
Weight: 1021g

Environmental

Operating Temperature: -45°C to 75°C
Storage Temperature: -45°C to 85°C
Relative Humidity: 10 to 95% (non-condensing)

Standard

EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 4
EN61000-4-3(RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
EN61000-4-6(CS), Level 3
EN61000-4-8(PFM), Level 5
Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6

Warranty

Warranty time: 5 years

Certification

CE, FCC, RoHS, UL508(Pending)