3M B2194719 User Manual

3M™ Scotch-Brite™ Products, Multi-Finishing Wheels: SFIN, SMED, SCRS 04/01/14

__________________________________________________________________________________________

Page 1 of 10

Safety Data Sheet

Copyright,2014,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group:

19-7409-6

Version Number:

3.08

Issue Date:

04/01/14

Supercedes Date:

03/18/13

SECTION 1: Identification

1.1. Product identifier

3M™ Scotch-Brite™ Products, Multi-Finishing Wheels: SFIN, SMED, SCRS

1.2. Recommended use and restrictions on use

Recommended use

Abrasive Product

1.3. Supplier’s details
MANUFACTURER:

3M

DIVISION:

Abrasive Systems Division

ADDRESS:

3M Center, St. Paul, MN 55144-1000, USA

Telephone:

1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number

1-800-364-3577 or [phone] (24 hours)

SECTION 2: Hazard identification

2.1. Hazard classification

Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.

2.2. Label elements

Signal word

Not applicable.

Symbols

Not applicable.

Pictograms

Not applicable.

2.3. Hazards not otherwise classified

None.

48% of the mixture consists of ingredients of unknown acute oral toxicity.

3M™ Scotch-Brite™ Products, Multi-Finishing Wheels: SFIN, SMED, SCRS 04/01/14

__________________________________________________________________________________________

Page 2 of 10

SECTION 3: Composition/information on ingredients

Ingredient C.A.S. No. % by Wt

Silicon Carbide Mineral 409-21-2 35 - 50
Titanium Dioxide 13463-67-7 0 - 1.5
Lubricant 4485-12-5 0.5 - 1.5
Carbon Black 1333-86-4 0 - 0.75
Lubricant 64742-52-5 0.05 - 0.5
Quartz Silica 14808-60-7 0.01 - 0.25
Cured Resin Mixture 30 - 50
Nylon Fiber Mixture 5 - 20
Fiberglass Core Mixture 1 - 5

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation:

No need for first aid is anticipated.

Skin Contact:

No need for first aid is anticipated.

Eye Contact:

No need for first aid is anticipated.

If Swallowed:

No need for first aid is anticipated.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1. Information on toxicological effects.

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Suitable extinguishing media

In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture

None inherent in this product.

Hazardous Decomposition or By-Products

Substance Condition

Carbon monoxide During Combustion
Carbon dioxide During Combustion

5.3. Special protective actions for fire-fighters

No unusual fire or explosion hazards are anticipated.

SECTION 6: Accidental release measures

3M™ Scotch-Brite™ Products, Multi-Finishing Wheels: SFIN, SMED, SCRS 04/01/14

__________________________________________________________________________________________

Page 3 of 10

6.1. Personal precautions, protective equipment and emergency procedures

Observe precautions from other sections.

6.2. Environmental precautions

Not applicable.

6.3. Methods and material for containment and cleaning up

Not applicable.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Avoid breathing of dust created by sanding, grinding or machining. Damaged product can break apart during use and cause
serious injury to face or eyes. Check product for damage such as cracks or nicks prior to use. Replace if damaged. Always
wear eye and face protection when working at sanding or grinding operations or when near such operations. Combustible
dust may form by action of this product on another material (substrate). Dust generated from the substrate during use of this
product may be explosive if in sufficient concentration with an ignition source. Dust deposits should not be allowed to
accumulate on surfaces because of the potential for secondary explosions.

7.2. Conditions for safe storage including any incompatibilities

No special storage requirements.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

Occupational exposure limits

Ingredient C.A.S. No. Agency Limit type Additional Comments

Carbon Black 1333-86-4 Amer Conf of

Gov. Indust.
Hyg.

TWA(inhalable fraction):3
mg/m3

Carbon Black 1333-86-4 Chemical

Manufacturer
Rec Guid

TWA:0.5 mg/m3

Carbon Black 1333-86-4 US Dept of

Labor - OSHA

TWA:3.5 mg/m3

Titanium Dioxide 13463-67-7 Amer Conf of

Gov. Indust.
Hyg.

TWA:10 mg/m3

Titanium Dioxide 13463-67-7 Chemical

Manufacturer
Rec Guid

TWA(as respirable dust):5
mg/m3

Titanium Dioxide 13463-67-7 US Dept of

Labor - OSHA

TWA(as total dust):15 mg/m3

Quartz Silica 14808-60-7 Amer Conf of

Gov. Indust.
Hyg.

TWA(respirable
fraction):0.025 mg/m3

Quartz Silica 14808-60-7 US Dept of

Labor - OSHA

TWA concentration(as total
dust):0.3 mg/m3;TWA
concentration(respirable):0.1
mg/m3(2.4 millions of
particles/cu. ft.)