3M AV-3000 HT Instruction Manual

3M™ Scott™

AV-3000 HT

Facepiece

AV-3000 HT Facepiece

Enhanced thermal performance

The 3M™ Scott™ AV-3000 HT facepiece meets all requirements established in the NFPA 1981, 2018 Edition standard as a component of the SCBA, with advanced material technology to provide enhanced thermal durability and voice intelligibility performance for improved user safety.

Lower Total Cost of

Ownership

All AV-series facepieces are designed for Top-Down Convertibility. This means you can use a single facepiece with a single fit test for all of your NIOSH, CBRN and NFPA–approved respirators. (Some approvals pending).

High Performance Lens

and Bezel

High performance materials in the lens and bezel meet the rigorous requirements laid out in NFPA 1981, 2018 Edition. These new materials enhance wearer safety when exposed to high heat and flame loads.

Backward Compatibility

Approved for use with the latest Air-Pak X3 Pro SCBA, the AV-3000 HT facepiece also provides backward compatibility for use with older model Air-Pak SCBA meeting the 2013 Edition, 2007 Edition, and 2002 Edition of the NFPA 1981 standard.

Improved Voice Intelligibility

Redesigned voice communication components deliver outstanding voice intelligibility, exceeding the requirements of NFPA 1981, 2018 Edition. The dual

voicemitters provide a sphere of intelligibility to those around the wearer, not just those directly in front.

Configured to meet your needs

•Available in a 4-strap or 5-strap headnet

•Compatible with full line of EPIC 3 communications devices

•Compatible with award-winning 3MTM ScottTM Sight In-Mask Thermal Imager