Models:
APUN101 / APUN201 / APUN301 /
APUN100-LM / APUN200-LM
Spec #
Quantity
Application:
• pH Adjustment of Acidic Water
Upfl ow Acid Neutralizers
At a Glance:
• Helps prevent blue/green stains on fi xtures
• Aids in protecting copper plumbing systems
Product Benefi ts:
New tank design is equipped with threaded valve to tank connections
• The translucent tank helps provide a convenient method to view the media bed level
• Fill-port included for easier media fi lls and additions
• Calcium carbonate media helps neutralize acidic water (pH levels below 6.7) by
raising the pH
- Helps inhibit corrosion of copper pipes and lead solder joints
- Helps prevent blue/green stains and pitted fi xtures caused by corrosion
• The upfl ow system design helps reduce backwashing that is required for
continuous operation
• No control valve required
• No electricity required
• No drain line required
APUN101
Product Specifi cations:
Model
APUN101
APUN201
APUN301
APUN100-LM
APUN200-LM
Inlet/Outlet”
Size (NPT)
1 in (2.54 cm) 63 in (160.0 cm) 10 in (25.4 cm) 133 lb (61.3 kg) 6 gpm (22.7 lpm) 110°F (43.3°C) 100 psi (689 kPa) 1.0 C
1 in (2.54 cm) 68 in (132.1 cm) 12 in (30.5 cm) 245 lb (111.2 kg) 7 gpm (26.5 lpm) 110°F (43.3°C) 100 psi (689 kPa) 2.0 C
1 in (2.54 cm) 76 in (193.0 cm) 14 in (35.6 cm) 398 lb (180.5 kg) 12 gpm (45.4 lpm) 110°F (43.3°C) 100 psi (689 kPa) 3.0 C
1 in (2.54 cm) 63 in (160.0 cm) 10 in (25.4 cm) 84 lb (38.1 kg) 6 gpm (22.7 lpm) 110°F (43.3°C) 100 psi (689 kPa) N/A N/A
1 in (2.54 cm) 68 in (132.1 cm) 12 in (30.5 cm) 92 lb (41.7 kg) 7 gpm (26.5 lpm) 110°F (43.3°C) 100 psi (689 kPa) N/A N/A
Height
Dimensions
Diameter
Max.
Approximate
Weight
Maximum
Flow Rate
Maximum
Water
Temperature
Max. Water
Pressure
Media
Cu. Ft.
Standard
Media
Spec #
Quantity
Model Number
Part Number
Product Overview: Media Options:
The APUN Series Upfl ow Acid Neutralizer helps prevent corrosion of
copper pipes and plumbing fi xtures by effectively raising low pH (acidic)
water. The APUN Series Upfl ow Acid Neutralizer directs the acidic water
through a special limestone and limestone blended media bed. The acidic
water is neutralized as it slowly dissolves the media, thus automatically
raising the pH level.
The design of the APUN Series Upfl ow Acid Neutralizer, which draws
water upward through the media bed, greatly reduces the potential caking
of the media. The simplicity of the upfl ow design requires no electricity,
backwashing or a drain, making the APUN Series Upfl ow Acid Neutralizer
a simple, effective and economical solution for acidic water.
Easy Installation:
The APUN Series Upfl ow Acid Neutralizer is easily installed on cold water
lines only. It should be installed after
the pressure tank and prior to any water
treatment device.
Bathroom Kitchen
A boiler drain is provided for fl ushing the
neutralizer after installation and media
replenishment.
Pump
WaterMeter
PressureTank
Well
Supply
Only
Public
Water
Supply
Well
Water
Supply
Kitch
Utility Room
Diagram is for quick
reference only.
Installation must
be performed in
accordance with the
Installation and Use
Manual accompanying
the product.
Media Material Application
C Calcium Carbonate Neutralization of acidic water as low as 6.0 units
N Special Blend Media Neutralization of acidic water below 6.0 units
Maintenance*
The fi lter media requires periodic replenishment depending on the amount of water
used and the degree of acidity. The neutralizer should be checked every 3-6 months
to make sure that the media is no more than 2” below the media fi ll line. The fi llport located on the top of the tank permits simple replenishment of the “sacrifi cial”
media.
The “C” or “N” Media helps to prevent the corrosion of copper pipes and plumbing
fi xtures by raising low pH (acidic) water conditions. This process is similar to
adding lime to acidic soil or taking an antacid. “C” Media is used for moderate
pH levels (6.0-6.7 units). “N” Media, which dissolves more rapidly, is used for
more extreme conditions (pH 5.5-6.0 units and as low as 5.0 units under certain
conditions). Both types of media are consumed during neutralization and must be
replenished periodically. The “N” or “C” Media is available in 0.5 cu. ft. pails for
periodic replenishment.
The neutralizing media will help to increase the hardness level, along with the pH
level in the treated water. Under higher hardness conditions, a water softener or a
scale reduction fi lter is recommended for post-treatment to soften the water or help
protect the hot water system.
* The maintenance and installation information contained on this sheet is for informational
purposes only. Complete installation and maintenance instructions are provided in the
Installation and Operation manual included with the system.
WARNING
To reduce the risk associated with the ingestion of contaminants:
• Do not use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system.
CAUTION
To reduce the risk associated with property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
Limited Warranty:
3M Purifi cation Inc. warrants this Product to be free from defects in material and workmanship during normal use for the warranty period set forth below. The warranty period commences
from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purifi cation Inc. or failure to follow installation
and use instructions. No warranty is given as to the service life of any fi lter cartridge, membrane, or media as it will vary with local water conditions and water consumption. 3M
PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE
OF TRADE. If the Product is found defective within the warranty period, your exclusive remedy and 3M Purifi cation Inc.’s sole obligation shall be, at 3M Purifi cation Inc.’s option, to
replace or repair the Product or refund the purchase price of the Product. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M
Purifi cation Inc.’s exclusive obligation.
Warranty Period: One (1) year on the entire product unit; Five (5) years on the media tank only (does not include internal component parts); Five (5) years on the fi ll-port assembly; and
Five (5) years on salt storage container and components*
For additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction manual.
Limitation of Liability: 3M Purifi cation Inc. will not be liable for any loss or damage arising from this 3M Purifi cation Inc. product, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
*Water Softeners Only
3M Purifi cation Inc.
400 Research Parkway
Meriden, CT 06450, U.S.A.
Tel (800 ) 733-1199
(203) 237-5541
Fax (203) 238-8701
www.aquapure.com
www.3Mpurifi cation.com
Distributed by:
Please recycle. Printed in U.S.A.
Aqua-Pure is a trademark of 3M Company used under license.
3M is a trademark of 3M Company.
© 2012 3M Company. All rights reserved.
70-0202-3365-9
REV 0312