Table of Contents
Section 7 – Table of Contents
3M™ APC™ Flash-Free Adhesive Coated |
7.2 |
Appliance System....................................................... |
|
Tooth Preparation........................................................ |
7.4 |
Miscellaneous Products............................................... |
7.4 |
3M™ Transbond™ Plus Self Etching Primer.................. |
7.5 |
3M™ Transbond™ MIP Moisture Insensitive Primer.... |
7.5 |
3M™ Transbond™ XT Primer.......................................... |
7.5 |
3M™ Transbond™ XT Light Cure Adhesive.................. |
7.6 |
3M™ Transbond™ PLUS Color Change Adhesive......... |
7.7 |
3M™ Transbond™ LR Light Cure Adhesive................... |
7.7 |
3M™ Transbond™ Plus Light Cure Band Adhesive...... |
7.8 |
3M™ Unitek™ Multi-Cure Glass Ionomer |
7.8 |
Orthodontic Band Cement........................................ |
|
3M™ Ortholux™ Luminous Curing Light....................... |
7.9 |
3M™ Concise™ Orthodontic Chemical Cure |
7.10 |
Adhesive.................................................................... |
|
3M™ Unite™ Bonding Adhesive................................... |
7.10 |
3M™ Sondhi™ Rapid-Set Indirect Bonding |
7.10 |
Adhesive.................................................................... |
|
3M™ Transbond™ IDB Pre-Mix Chemical Cure |
7.11 |
Adhesive.......................................................................... |
|
3M™ RelyX™ Unicem 2 Automix Self-Adhesive |
7.11 |
Resin Cement............................................................. |
|
3M™ Transbond™ Supreme LV Light Cure |
7.11 |
Adhesive..................................................................... |
Bonding/Banding
Products and 7
Curing Light
7.2 Bonding/Banding Products and Curing Light
3M™ APC™ Flash-Free
Adhesive Coated Appliance System
Simply a better way to bond.
Bonding is undergoing a revolution. And while the current system of adding adhesive to a bracket works fine, the 3M™ APC™ Flash-Free Adhesive Coated Appliance System works even better—and faster. The system’s next generation, resin-soaked nonwoven mat adheres to enamel for a better, reliable bond that also eliminates the process of flash removal.
At 3M, we think it’s time to leave flash behind. We used proven
3M technologies to develop APC Flash-Free Adhesive—the most efficient bonding system in orthodontics. Our innovative design creates a unique adhesive bonding substrate on the base of each bracket.
APC Flash-Free adhesive coated brackets have shown an average bond failure rate of less than two percent in the first ninety days of bonding.*
APC Flash-Free Adhesive is available on five appliance choices for complete 7x7 bonding and is compatible with both metal and ceramic brackets.
Saves Time and Cost
Faster and more efficient bonding than non-precoated brackets.
Eliminates the flash removal step from bonding.
Simple, easy clean-up at debonding.
Superior Bonding Efficiency
Bond time is reduced up to 40% per bracket.
No flash removal reduces accidental bracket movement after positioning, reducing the need to reposition.
Protects tooth enamel under adhesive.
For more information, visit 3M.com/APCFF or contact your 3M Representative today.
*3M data on file.
3M Oral Care Orthodontic Product Catalog 2020 |
USA and PR: 1-800-423-4588 |
Bonding/Banding Products and Curing Light 7.3
Proven technology. Superior performance.
Powered by 3M science, APC Flash-Free Adhesive leverages several of the highly advanced 3M Technology Platforms such as nanotechnology, adhesives and nonwoven materials. The result is a revolutionary way to bond orthodontic appliances that eliminates the many challenges of bonding with flash.
Bonding reliability without flash removal. Orthodontic appliances bonded using APC Flash-Free Adhesive have reliable bond strength that’s comparable to 3M™ Transbond™ XT Adhesive and 3M™ APC™ II Adhesive while eliminating challenging and time-consuming flash removal.
The difference is the fibers. Minimal bracket drift occurs after initial placement because of the adhesive bond provided by nonwoven materials. A web of micron-sized polypropylene fibers provide the necessary thickness and loft needed for a reliable bond.
A smooth, even and hygienic seal.
The pre-coated resin forms a smooth meniscus around the bracket base. This creates an even seal and protects the enamel under the surface of the bracket from acid erosion caused by microleakage.
APC Flash-Free Adhesive is available with:
Clarity™ Ultra |
Clarity™ Advanced |
SmartClip™ SL3 |
Victory Series™ |
Victory Series™ Superior |
Self-Ligating Brackets |
Ceramic Brackets |
Self-Ligating Brackets |
Low Profile Brackets |
Fit Buccal Tubes |
APC Flash-Free Adhesive
Traditional paste adhesives require flash cleanup which can leave uneven excess adhesive or undercuts around the edges of brackets, allowing a surface area for food particles to accumulate or plaque to form. Our APC Flash-Free Adhesive forms a smooth
meniscus when the adhesive coated bracket is seated, which seals the tooth surface around the edges of the bracket.
3M.com/ortho |
3M Oral Care Orthodontic Product Catalog 2020 |
7.4 Bonding/Banding Products and Curing Light
Etching the Tooth Surface
Tooth Preparation
Brush Holder
4/pk
704-046
Unitek™ Etching Gel System |
Unitek™ Etching Gel System |
|
(Blue Tint) |
(Blue Tint) |
Unitek™ Etching Gel |
(35% Phosphoric Acid) |
(35% Phosphoric Acid) |
|
2 gel etch syringes (3.5 g each) |
2 gel etch syringes (3.5 g each) |
(Blue Tint) |
25 disposable plastic dispensing tips |
20 disposable metal dispensing tips |
35% phosphoric acid |
712-039 |
712-044 |
9 ml bottle |
|
|
704-060 |
Disposable Plastic Dispensing Tips |
Disposable Metal Dispensing Tips |
25/pk |
20/pk |
712-037 |
712-045 |
Miscellaneous Products
Bonding Prep Trays |
Dispensing Items |
25/pk tacky surface in well |
Mixing Pad 3" x 2½" |
709-029 |
5/pk |
100/pk tacky surface in well |
704-030 |
|
|
709-019 |
Disposable Spatulas |
|
100/pk |
|
704-045 |
Ortho Laboratory Adhesive for Indirect Bonding
3 syringe/pk
704-050
3M Oral Care Orthodontic Product Catalog 2020 USA and PR: 1-800-423-4588