Models:
AP430SS
Spec #
Quantity
Applications:
• Scale
Scale Inhibitition System
At a Glance:
• Unrestricted fl ow designed with 3/4” inlet/outlet connections
• Ideal for any size home and light commercial applications
• 304 Stainless Steel Head
Rated for
up to 10
GPM Flow
Rate
Product Benefi ts:
• 3/4” inlet and outlet connections for easy installation and high fl ow rates
AP430SS
Product Specifi cations:
Model No.
(Part No.)
AP430SS
(AP430-10)
Inlet/
Outlet
Size
3/4”
NPT
Dimensions
Height Diameter
10 1/4”
(26.0)
• Designed for scale and corrosion inhibition to help extend life of hot water systems,
pipes and downstream plumbing fi xtures
• Multi-application design effective on all types of hot water systems - boilers,
tankless, and tank-type (gas or electric)
• Manufactured from FDA CFR-21 compliant materials
2 3/4”
(7.0 cm)
Approx.
Weight
2.3 lbs.
(1.0 kg)
Flow Rate
10 gpm (37.9
lpm)
Max.
Water
Temp.
100 °F
(37.8 °C)
Max.
Water
Pressure
125 psi
(862 kPa)
Std.
Repl.Ctg.
No.
AP431 1
Repl. Cart.
Qty.
Spec #
Quantity
2-3/4”
(7.0 cm)
10-1/4”
(26.0 cm)
AP430SS
Easy Installation:
CAUTION: Diagram shown is for reference purposes
only. Read installation and operation manual prior to
installing the unit.
Model Number
Part Number
Specifi cations:
• 3/4” NPT inlet and outlet ports
• System is a single vessel design
• System is manufactured from FDA CFR-21 compliant materials
• System has a maximum operating pressure of 125 psi (862 kPa)
and operating temperature of 100 °F (37.8 °C)
• System to be installed on cold water line feeding the water heater
• 304 Stainless Steel Head
Replacement Cartridge Options
Rust
Application
Chlorine
Taste & Odor
Scale
•
Max. Flow Rate
10 gpm (37.9 lpm)
Sediment
Model
AP431 N/A N/A
Load
Nominal
Micron
Rating
Sediment/
WARNING:
To reduce the risk associated with the ingestion of contaminants:
• Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
nehctiKmoorhtaB
CAUTION:
To reduce the risk associated with property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• The disposable cartridge must be replaced every 6 months or sooner.
3M Purifi cation Inc. recommends regularly scheduled maintenance and
replacement of the fi lter cartridge(s) in order for the product to perform as
advertised/sold.
Pump
Water Meter
Pressure Tank
Well
Supply
Only
AP430SS
Water
Heater
Public
Water
Supply
Well
Water
Supply
Limited Warranty 3M Purification Inc. warrants the stainless steel head (excluding disposable cartridge(s)) to be free from defects in material and workmanship for twenty-fi ve (25) years from the date of purchase. The
disposable cartridge is warranted from defects in material and workmanship for a period of one (1) year from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purification Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any cartridge as it will vary with local water conditions and
water consumption. 3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product
fails to satisfy this Limited Warranty during the warranty period, 3M Purification Inc. will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in
this paragraph is Customer’s sole remedy and 3M Purification Inc.’s exclusive obligation. For additional information, see the entire Limited Warranty located in the product Installation and Operating
Instruction Manual.
Limitation of Liability. 3M Purification Inc. will not be liable for any loss or damage arising from this 3M Purification Inc. product, whether direct, indirect, special, incidental, or consequential, regardless of the
legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you.
3M Purifi cation Inc.
400 Research Parkway
Meriden, CT 06450 U.S.A.
Toll Free: 1.800.222.7880
Worldwide: 203.237.5541
Fax: 203.238.8701
www.aquapure.com • www.3Mpurifi cation
Distributed by:
Aqua-Pure is a trademark of 3M Company used under license.
3M is a trademark of 3M Company
© 2011 3M Company. All rights reserved.
70-0201-9244-2
REV 0411