3M 577F User Manual

"All statements, technical information and recommendations contained herein are based
on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed. The
results reported herein are based solely on the limited sample provided to us for testing under
laboratory conditions and are NOT intended to be representative of typical product performances.

3M shall not be liable in tort or in contract for any injury, loss or damage, direct, indirect, special
or consequential, arising out of the use of or the inability to use the product. Before using, user
shall determine the suitability of the product for user's intended use, and user assumes all risks
and liability whatsoever in connection therewith ."

3M 577F Cubicut™ Polycut™ Resin Bond Cloth

Product 577F
Construction P-graded Alumina -Zirconia mineral is coated on a

strong Y weight polyester backing. A grinding aid
supersize is also included. Available in grades P24,
P36, P40, P50, P60, P80, P100, P120, P150 and
P180.

Application Areas Moderate grinding pressures requiring backing

strength. Works very well on stainless steel and

other exotic alloys.
Features Best suited to off -hand grinding.
Max. Available Width 52 in (1320.8 mm)

Available Converted Forms (*)

Belts Discs Evenrun

* Regular * Regular Bands
Segment Roloc™ Belts
Clipped Delappe

Overlap slotted

Rolls Stikit™ Other

* Regular Disc/roll PG wheels
Scored Sheet/roll * RX segments
Serrated Refill rolls Slashed assemblies
Slit down Individual discs Sheets
* Cartridge Individual sheets Cones