3M Shielded/Jacketed, Flat Cable
.050″ 28 AWG Stranded, PVC/PVC 3517 Series
S Meets external wiring requirements of
National Electrical Code, Article 725 (CL2)
S UL listed for USA and Canadian markets
S 28 AWG stranded wire on .050 inch centers
permits mass termination to broad line of IDC
connectors
S 360 degree expanded copper shielding provides
20 db average shielding effectiveness
S Primary cable is zippable for branching or
discrete terminations
Date Modified:May 30, 2003
TS-0069-18
Sheet 1of 2
Physical
Jacket
Material: Polyvinyl Chloride (PVC)
Color: Black
Primary Material: PVC
Color: Gray
Marking
Standard:
Conductors: 28 AWG 7 × 36 [ 7× 0.127 ] Tinned Stranded Copper
Shielding Material: Expanded Copper
(UL) CL2 75C 28 AWG OR AWM 20879 3M NU
EU <50V
C
AWM IIA/B 80C 300VFT1
Electrical
Voltage Rating: USA: N.E.C. 725, CL2 or AWM 300V Canada: 300V EU: <50V
10
Insulation Resistance: (Primary Cable) >1 × 10
Unbalanced Balanced
Characteristic Impedance: 70 Ω 119 Ω
Capacitance: 21.5 pF/ft (70.5 pF/m) 12.7 pF/ft (41.7 pF/m)
Inductance: .11 µH/ft (0.36 µH/m) .19 µΗ/ft (0.62 µΗ/m)
Propagation Delay: 1.51 ns/ft (4.95 ns/m) 1.51 ns/ft (4.95 ns/m)
Velocity of Propagation: 67% 67%
Note: Unbalanced is measured between ground-signal-ground conductors,with shield grounded. Balanced is measured between signal conductors
within a pair,with theshield floating.
Ω/10 ft. [ 3m ]
Environmental
Temperature Rating: USA: CL2; 75°CorAWM: --20°Cto+80°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
UL File No.: E118773, Power Limited Circuit Cable: CL2 (orAWM Style 20879)
3
Interconnect Solutions
http://www.3M.com/interconnects/
For technical, sales or ordering information call
3M is a trademark of 3M Company.
800-225-5373
3M Shielded/Jacketed, Flat Cable
.050″ 28 AWG Stranded, PVC/PVC 3517 Series
Number of
Conductors
3M Part
Number
Dimension A ± .04 Dimension B
09 3517/09 .58[14.7] 0.400 ± .007 [ 10.16 ]
10 3517/10 .63[16.0] 0.450 ± .007 [ 11.43 ]
14 3517/14 .83[21.1] 0.650 ± .007 [ 16.51 ]
15 3517/15 .88[22.4] 0.700 ± .007 [ 17.78 ]
16 3517/16 .93[23.6] 0.750 ± .011 [19.05 ]
20 3517/20 1.13 [ 28.7 ] 0.950 ± .011 [ 24.13 ]
24 3517/24 1.33 [ 33.8 ] 1.150 ± .011 [ 29.21 ]
25 3517/25 1.38 [ 35.0 ] 1.200 ± .011 [ 30.48 ]
26 3517/26 1.43 [ 36.3 ] 1.250 ± .011 [ 31.75 ]
30 3517/30 1.63 [ 41.4 ] 1.450 ± .015 [ 36.83 ]
34 3517/34 1.83 [ 46.5 ] 1.650 ± .015 [ 41.91 ]
36 3517/36 1.93 [ 49.0 ] 1.750 ± .015 [ 44.45 ]
37 3517/37 1.98 [ 50.3 ] 1.800 ± .015 [ 45.72 ]
R
40 3517/40 2.13 [ 54.1 ] 1.950 ± .015 [ 49.53 ]
50 3517/50 2.63 [ 66.8 ] 2.450 ± .015 [ 62.23 ]
60 3517/60 3.13 [ 79.5 ] 2.950 ± .015 [ 74.93 ]
64 3517/64 3.38 [ 85.9 ] 3.150 ± .015 [ 80.01 ]
A
B
.050 ± .002 Typ
[1.27]
.11± .03
[2.8]
Paper
(Mfgr. Option)
.005 [ 0.13 ] Ref
Expanded Copper
Note: Red marking on edge of primary cable designates wire #1.
Ordering Information
Note: Standard length is 100 ft/roll.
PVC Primary
Insulation
28 AWG 7 X 36 [ 7 X 0.127 ]
Tinned Stranded Copper Conductors
3517/XX
Number of Conductors
(See Table)
.026 Min (0.66)
PVC Jacket
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
TS-0069-18
Sheet 2 of 2
±.010±.1 ±.05
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
© 3M 2003
3
Electronic and Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/eisd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
Loading...