3M 3357-6509, 3357-6515, 3357-6525, 3357-6537 User Manual

3M™ D Sub EMI Junction Shell

Metalized Plastic

• Protection from EMI/ESD

• Easy assembly reduces time and labor to ensure low applied cost

• Light weight, compact design

• Strain relief compensates for multiple cable diameters

• Jackscrews provide positive retention

• RoHS* compliant

Physical

Shell

Material:

Plating:

Compression Insert:

Material:

Flammability:

Durometer:

Hardware:

Material:

Plating:

Mounting Hardware:

Date Modified: August 19, 2005

ABS

Nickel Over Copper

Thermo Plastic Elastomer

UL 94V-0

75 + / - 5

(2) Jackscrews #4-40 × .438

(2) Saddle Washers

(2) Nuts 4-40 UNC for 9, 15 & 25 position

(3) Nuts 4-40 UNC for 37 position

(2) Screws 4-40 UNC for 9, 15 & 25 position

(3) Screws 4-40 UNC for the 37 position

Steel

Zinc

See Specification Sheet TS-0142

TS-0032-10 Sheet 1 of 2

Environmental

Temperature Rating:

"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values

in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,

Interconnect Solutions

http://www.3M.com/interconnects/

*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

0°C to +75°C

this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ D Sub EMI Junction Shell

Metalized Plastic

Table 1 - Compression Inserts

0.285

[ 7.24 ]

0.370

[ 9.40 ]

0.570

[ 14.48 ]

Dimensions

0.360

[ 9.14 ]

0.450

[ 11.43 ]

0.655

[ 16.64 ]

0.255

[ 6.48 ]

0.300

[ 7.62 ]

0.500

[ 12.70 ]

Insert

For

3357-6509

3357-6515

3357-6525

3357-6537

1 2 3 4 5 6

OD ID OD ID OD ID OD ID OD ID OD ID

0.475

[ 12.07 ]

0.600

[ 15.24 ]

0.810

[ 20.57 ]

0.320

[,8.13 ]

0.450

[ 11.43 ]

0.650

[ 14.48 ]

0.360

[ 9.14 ]

0.450

[ 11.43 ]

0.700

[ 17.78 ]

0.315

[ 8.00 ]

0.410

[ 10.41 ]

0.620

[ 15.75 ]

0.360

[ 9.14 ]

0.450

[ 11.43 ]

0.655

[ 16.64 ]

0.360

[ 9.14 ]

0.450

[ 11.43 ]

0.655

[ 16.64 ]

0.210

[ 5.33 ]

0.230

[ 5.84 ]

0.425

[ 10.80 ]

N/A N/A

N/A N/A 0.600

0.655

[ 16.64 ]

0.350

[ 8.89 ]

0.475

[ 12.07 ]

[ 15.24 ]

0.810

[ 20.58 ]

See note 3

Junction Shell

see Table 2

Table 2- Junction Shell

3M Part Number

3357-6509

3357-6515 1.54

3357-6525 2.09

3357-6537 2.73

Note:

1. Compression inserts cannot be ordered separately.

2. Use appliable Jack Screw or Jack Socket Kit mounting hardware.

3. The 37 position shell has 3 cover screw holes.

A B C D E F Min Max

1.22

[ 31.2 ]

0.64

[ 16.3 ]

[ 39.1 ]

[ 53.1 ]

[ 69.3 ]

Dimensions Cable O.D. Range

1.58

[ 40.13 ]

1.88

[ 47.75 ]

1.71

[ 43.43 ]

2.12

[ 53.85 ]

0.40

[ 10.2 ]

0.52

[ 13.2 ]

0.73

[ 18.5 ]

Ordering Information

3357-65XX-XX

G (Dia Collar)

Compression Inserts

see Table 1

0.984

0.64

[ 16.3 ]

0.71

[ 18.0 ]

0.91

[ 23.11 ]

[ 24.99 ]

1.312

[ 33.32 ]

1.857

[ 47.17 ]

2.500

[ 63.50 ]

0.210

[ 5.33 ]

0 . 2 3

[ 5.84 ]

0.35

[ 8.89]

0.320

[ 8.13 ]

0.45

[ 11.43]

0.65

[ 16.51 ]

Inch

[mm]

Tolerance Unless Noted

.0 .00 .000

inch ±.1 ±.01 ±.005

[ ] Dim e ns ion s for Re fere nce

Onl

Interconnect Solutions

http://www.3M.com/interconnects/

Connector Size 09 = 9 Position 15 = 15 Position 25 = 25 Position 37 = 37 Position

Blank = Non-RoHS compliant backshells 1C = RoHS compliant backshells

3M is a trademark of 3M Company.

For technical, sales or ordering information call

TS-0032-10 Sheet 2 of 2

800-225-5373

+ 1 hidden pages