3J USB-M2K User Manual

User Manual for

USB-M2K

1. Instruction

1.1 Summary

USB-M2K is a USB phone embedded with 128M memory drive.
Once you plug it into your computer’s USB port, the softphone
stored in memory drive will auto run without any additional
installation, login in the account stored automatically, and then
you can make VoIP calls.

1.2 Features

1. Built-in 128M bytes memory drive

2. Auto-run function under windows 2000 sp4 and XP

3. Embedded in Softphone with account information

4. Softphone and account information can be stored to be
readable for end user

5. Un-plug & close automatically without affecting PC system
operation

6. With ear-phone jack

7. No need sound card

8. Echo cancellation, full duplex communication

9. PC-to-PC, PC-to-phone, Phone to Phone operation

1

1.3 System Requirements

1. Windows 2000 or XP

2. 400MHz processor and free USB1.1 or USB2.0 port

3. 128MB RAM and 15MB free disk space

4. Any broadband connection or minimum 33.6 Kbps dialup

1.4 Package Contents

1. One USB-M2K

2. One user manual

3. One USB cable

4. One ear-phone

2 Using USB-M2K

For example: Embed Skype into USB-M2K.

2.1 Install Skype

Download Skype software from www.skype.com.
Double click Skype installation program to install it, select

the destination folder to USB-M2K’s “autorun” disk.

Note: If you have installed the Skype program in your computer,
you just need to copy the whole folder “Skype” to autorun disk.

Open the “autorun.inf” file in autorun disk, made

“Skype.exe” as autorun program.
For example: The program “Skype.exe” is in the folder
“Skype\Phone”, you can write as below:

open0=Skype\Phone\Skype.exe

2.2 Connect USB-M2K to PC

When USB-M2K is connected to PC, Skype program which

was embedded will auto-run.

Log in Skype with Skype account.

You can create a Skype account as shown below:

2

3