3J USB-B2K User Manual

1. Instruction

1.1 Summary

USB Adaptor is analog telephone adaptor with one USB interface

to PC, 1 FXS for regular phone and 1FXO for PSTN call relays.

All cordless phones and regular phones can be used to make and

receive Skype call. Phone can be used to make regular call at the

same time. Phone rings for all incoming skype and PSTN calls.

Skype or PSTN calls is switched by pressing phone key(*).

1.2 Features

1. Supporting DECT, 2.4G, 900M and any other wireless phones

2. Make/Receive both Skype calls and regular PSTN calls

3. Auto-detection and auto-switching to Skype or PSTN calls

4. Phone rings for all incoming Skype and PSTN calls

5. Skype or PSTN calls switched by pressing phone key(*)

6. Using the phone keypads to dial.

1.3 System Requirements

1. Macintosh computer with G3, G4 or G5 processor

2. Mac OS X v10.3

3. Free USB1.1 or USB2.0 port

4. 128MB RAM and 20MB free disk space

5. Any broadband connection or minimum 33.6 Kbps dialup

1

1.4 Package Contents

3. USB Adaptor Installation

1. One USB Adaptor

2. One USB Cable

3. One Telephone Line

4. One User Manual

5. One Installation CD

2. Connect USB Adaptor to PC

3.1 Install the Skype Software

Note:

proceed to 3.2

3.2 Install SkypeMate Software

If you have previously installed the Skype software,

Download Skype software and install it (www.skype.com).

The version must be 1.3.0.17 or higher.

Create a Skype account following the on-screen instructions.

Download SkypeMate software and install it.

Double click the SkypeMate icon on the desktop, you will

be prompted that another program wants to use Skype.

Select Allow this program to use Skype and click OK.

Connect to PC’s USB port

Connect to PSTN line Connect to phone

(1) Connect USB Adaptor to PC, POWER indicator will be on.

(2) Plug PSTN line in "LINE" port.

(3) Connect Phone to "TEL” port.

2 3

3.3 Channel Switch

You can press * to switch between USB and PSTN.