3D Simo MultiPro Instructions
Burning and soldering tips are consumables,
and it is possible to replace them with tips
available on 3Dsimo e-shop. Dismount the tip
by unscrewing it counterclockwise. Tightening
of replacement tip has to be done clockwise,
nger tight only, without using any tools.
Foam cutting attachment
Cleaning of the resistance wire can be done
using paper towels.
In case of resistance wire breaking, always
replace the wire with new segment from
supplied spool, or with wire available at
3Dsimo e-shop.
7. WARNING
Danger of burn injury – 3Dsimo attachments
and it’s parts can reach temperature of up to
450°C (842°F), DO NOT TOUCH the nozzle,
resistance wire or the burning and soldering
tips few minutes after nishing work with
the attachment.
DO NOT dismout the 3D drawing attachment
when the lament is still inside the
attachment, otherwise you might damage
internals of the device!
Avoid contact of 3Dsimo Multipro and it’s
parts with ammable and volatile substances.
Warn your surroundings about high
temperatures of attachments. Always let the
attachments cool off before storing them in
the packaging, otherwise high temperatures
may lead to damage to the packaging and
attachments.
Always use original 3Dsimo Inc. laments and
accessories. Using unauthorised laments
and accessories may lead to unrepairable
damage to the device and it’s attachments.
3Dsimo Inc. is not liable for damage caused
by not folowing User’s manual.
This product and any of it’s parts are not a toy,
children have to be under adult supervision
while using this device.
Keep all the parts and accessories of 3Dsimo
MultiPro dry, avoid contact with uids at
any times while transporting and/or storing
3Dsimo device.
Never take 3Dsimo MultiPro appart. In case
of any failure or unwanted behavior, contact
our customer support: support@3dsimo.com
Never use power adapter and power cable if
any of it’s parts are damaged. Risk of injury
by electricity.
Save this User’s manual for later use.
3Dsimo Inc. is not responsible for any injury
or damage to property if 3Dsimo MultiPro
or any of it’s accessories and attachments
are used otherwise than is stated in this
user’s manual.
INSTRUCTION FOR USE – 3DSIMO MULTIPRO:
Multifuctional tool for workshops and households
8. SPECIFICATIONS
Adapter:
Input voltage: 100– 240 VAC, 50 / 60 Hz
Output voltage: 12 V
Output power: 24 W
3Dsimo MultiPro:
Input voltage: 12– 24 V
Input current: 2 A
Noise level:
21– 30 dB
9. CERTIFICATES
This device follows European Regulation
for Registration, Evaluation, Authorisation
and Restriction of Chemicals (REACH)
(Regulation no.: 1907/206/ES of European
parliament and European Council), and
European regulation for limiting usage of
dangerous substances in electronical devices
(ROHS) (Regulation no.: 2002/95/ES of
European parliament and European Council)
European safety regulations. This device is
following European safety regulations.
1. INTRODUCTION
Congratulations on your purchase of 3Dsimo
MultiPro, multifunctional tool, which will help
you transform your creativity into reality. All you
need to do, is power up the 3Dsimo MultiPro
using included adapter, chose attachment,
mount the attachment and nish tutorial
displayed on the device.
Before you start using the device, make sure
you are familiar with this user’s manual and all
the functions, maintanance and risks of using
3Dsimo MultiPro.
In case of any questions, please visit our
website or contact our customer support:
support@3dsimo.com
2. PACKAGE CONTENT
•
1x 3Dsimo MultiPro with 3D drawing
attachment mounted
•
1x Soldering attachment
•
1x Burning attachment
•
1x Foam cutting attachment
•
1x Platform for accurate foam cutting
•
1x Platform bolt
•
1x Power adapter
•
1x Spool of resistance wire
•
1x Package of soldering tin
•
15 meters of lament
10. WARRANTY AND CUSTOMER
SUPPORT
This device includes 12 month warranty.
In case of any failure or misbehavior of this
device, please contact: support@3dsimo.com
Original accessories and laments are
available here: eshop.3dsimo.com
3. 3DSIMO MULTIPRO CONTROLS
front button main button
attachment slot
4. SMARTPHONE APP
Smartphone app is available for Android
and iOS devices. (3Dsimo App will be
available 1. 2. 2019)
3Dsimo App allows you to update your device
for future attachments, also offers a number
of tutorials and ideas on usage of your
3Dsimo MultiPro.
3Dsimo MultiPro connectivity is available
via Bluetooth.
5. ATTACHMENT CHANGE
Your 3Dsimo MultiPro comes with
the 3D drawing tool attached.
To dismount the attachment, press
Attachment dismount button, then
dismount the attachment away
from the device.
To mount any attachment, insert chosen
attachment into attachment slot.
The attachment will be automaticaly
recognised by the device.
If the attachment was inserted for the rst
time, tutorial for the specic attachment
will appear on the device display.
Foam cutting attachment
First, you have to tighten the cutting wire
displayback button
lament slot
power input
4way navigation buttonattachment dismount button
between both ends of the attachment
(see picture), mount the attachment to the
3Dsimo MultiPro, choose desired temperature
of the tip (0-100%) and activate heating of the
attachment by pressing front button.
3D drawing attachment
After mounting the 3D drawing attachment
and successful completion of tutorial, choose
correct lament type. Material prole can be
changed with navigation cross, using left and
right buttons. Also you can choose different
feeding speeds using up and down buttons.
When READY is shown on the display, insert
lament. When lament is inserted, it is
necessary to push the lament in, while
holding front button. After about 5 seconds,
lament will start to come out from tip
of the nozzle.
Burning attachment
After mounting the Burning attachment
and successful completion of tutorial, choose
desired temperature of the tip (0– 100 %;
100 %≅450°C / 842°F) and activate heating
of the attachment by pressing front button.
Soldering attachment
After mounting the Soldering attachment
and successful completion of tutorial, choose
desired temperature of the tip (0– 100 %; 100
% ≅ 450°C / 842°F) and activate heating of the
attachment by pressing front button.
6. MAINTENANCE
3D drawing attachment
Make sure the lament is not deformed
and winded up too tightly.
Before nishing your work with 3D drawing
attachment, ALWAYS fully pull out the
lament, to prevent possible damage to
internal parts of your device.
Cleaning the nozzle is possible using paper
towels when the nozzle is heated up to
operating temperature – WARNING – HOT!
Soldering and Burning attachment
Cleaning the attachment is possible
using paper towels, never use sharp,
hard or otherwise abrasive tools, tips
have special coating and such cleaning
methods may lead to unwanted behavior
of the attachment.
Loading...